2018 INFINITI Q70-HYBRID seat adjustment

1-36Safety — Seats, seat belts and supplemental restraint system
SSS0640
1.If you must install a booster seat in the
front seat, move the seat to the rear-
most position.
2. Position the booster seat on the seat. Only place it in a forward-facing direc-
tion. Always follow the booster seat
manufacturer’s instructions.
LRS0454
Front passenger position
3. The booster seat should be positioned on the vehicle seat so that it is stable.
If necessary, adjust or remove the head
restraint or headrest to obtain the
correct booster seat fit. If the head
restraint or headrest is removed, store
it in a secure place. Be sure to reinstall
the head restraint or headrest when the
booster seat is removed. See “Head
restraints/headrests” (P.1-5) for head
restraint or headrest adjustment, re-
moval and installation information.
If the seating position does not have an
adjustable head restraint or headrest
and it is interfering with the proper booster seat fit, try another seating
position or a different booster seat.
4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure
to follow the booster seat manufac-
turer’s instructions for adjusting the seat
belt routing.
5. Pull the shoulder belt portion of the seat belt toward the retractor to take up
extra slack. Be sure the shoulder belt is
positioned across the top, middle portion
of the child’s shoulder. Be sure to follow
the booster seat manufacturer’s instruc-
tions for adjusting the seat belt routing.
6. Follow the warnings, cautions and in- structions for properly fastening a seat
belt shown in “Seat belts” (P.1-9).

3-4Pre-driving checks and adjustments
WARNING
.Always have the doors locked while
driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping to
prevent persons from being thrown
from the vehicle. This also helps keep
children and others from unintention-
ally opening the doors, and will help
keep out intruders.
. Before opening any door, always look
for and avoid oncoming traffic.
. To help avoid risk of injury or death
through unintended operation of the
vehicle and or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not
leave children, people who require
the assistance of others or pets
unattended in your vehicle. Addition-
ally, the temperature inside a closed
vehicle on a warm day can quickly
become high enough to cause a sig-
nificant risk of injury or death to
people and pets.
CAUTION
To prevent theft or accidents, be sure to
stop the engine and lock the doors
before stepping away from the vehicle.
JVP0231X
LOCKING WITH MECHANICAL
KEY
The power door lock system allows you to
lock or unlock all doors simultaneously using
the mechanical key.
.Turning the driver’s door key cylinder to
the front of the vehicle
will lock all
doors.
. Turning the driver’s door key cylinder
once to the rear of the vehicle
will
unlock the driver’s door. After returning
the key to the neutral position
, turning
it to the rear again within 60 seconds will
unlock all doors.
DOORS

3-24Pre-driving checks and adjustments
WARNING
.Do not adjust the steering wheel
while driving. You could lose control
of your vehicle and cause an accident.
. Do not adjust the steering wheel any
closer to you than is necessary for
proper steering operation and com-
fort. The driver’s air bag inflates with
great force. If you are unrestrained,
leaning forward, sitting sideways or
out of position in any way, you are at
greater risk of injury or death in a
crash. You may also receive serious or
fatal injuries from the air bag if you
are up against it when it inflates.
Always sit back against the seatback
and as far away as practical from the
steering wheel. Always use the seat
belts.
SPA2737
ELECTRIC OPERATION
Tilt or telescopic operation
Move the lever to adjust the steering wheel
up or down, forward or rearward to the
desired position.
Entry/Exit function operation:
The automatic drive positioner system will
make the steering wheel move up automa-
tically when the driver’s door is opened with
the ignition switch in the LOCK position.
This lets the driver get into and out of the
seat more easily.
For more information, see “Automatic drive
positioner” (P.3-28).
SPA2471
1. To block glare from the front, swing
down the sun visor.
TILT/TELESCOPIC STEERING SUN VISORS

3-28Pre-driving checks and adjustments
The automatic drive positioner system has
the following features:
.Entry/exit function
. Memory storage
. Setting memory function
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s
seat and steering column will automatically
move when the shift lever is in the P (Park)
position. This allows the driver to get into
and out of the driver’s seat more easily.
The driver’s seat will slide backward and the
steering wheel will move up when the
driver’s door is opened with the ignition
switch in the LOCK position.
The driver’s seat and steering wheel will
return to the previous positions when the
ignition switch is pushed to the ACC posi-
tion.
The driver’s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the seat is
at the exit position.
Cancel or activate entry/exit func-
tion
The shift lever must be in the P (Park)
position with the ignition switch in the OFF
position. The entry/exit function can be activated or
canceled by pressing and holding the SET
switch for more than 10 seconds.
Keep the SET switch pressed for more than
10 seconds to turn on or off the entry/exit
function.
The entry/exit function can also be acti-
vated or canceled if the [Lift Steering Wheel
on Exit] or [Slide Driver Seat Back on Exit]
key is turned to ON or OFF in the Vehicle
Settings on the center display. (See the
Infiniti InTouch Owner’s Manual.)
Initialize entry/exit function
If the 12-volt battery cable is disconnected,
or if the fuse opens, the entry/exit function
will not work though this function was set
on before. In such a case, after connecting
the 12-volt battery or replacing with a new
fuse, open and close the driver’s door more
than two times after the ignition switch is
turned from the ON position to the LOCK
position. The entry/exit function will be
activated.JVP0241X
MEMORY STORAGE
Two positions for the driver’s seat, steering
column and outside mirrors can be stored in
the automatic drive positioner memory.
Follow these procedures to use the memory
system.
1. Move the shift lever to the P (Park)
position.
2. Adjust the driver’s seat, steering column and outside mirrors to the desired posi-
tions by manually operating each adjust-
ing switch. For additional information,
see “Seats” (P.1-2), “Tilt/telescopic
steering” (P.3-24) and “Outside mirrors”
(P.3-26).
AUTOMATIC DRIVE POSITIONER

3. Push the SET switch and, within 5seconds, push the memory switch (1 or
2) fully for at least 1 second.
The indicator light for the pushed mem-
ory switch will stay on for approximately
5 seconds after pushing the switch.
When the memory is stored in the
memory switch (1 or 2), a buzzer will
sound.
If memory is stored in the same memory
switch, the previous memory will be
deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a stored
memory position with the following proce-
dure.
1. Follow the steps for storing a memoryposition.
2. While the indicator light for the memory switch being set is illuminated for 5
seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF position,
and then push the
button on the
Intelligent Key. The driver’s seat, steering
wheel and outside mirrors will move to the memorized position.
Confirming memory storage
.
Push the SET switch. If the main memory
has not been stored, the indicator light
will come on for approximately 0.5
second. When the memory has stored in
position, the indicator light will stay on
for approximately 5 seconds.
. If the 12-volt battery cable is discon-
nected, or if the fuse opens, the memory
will be canceled. In this case, reset the
desired position using the previous pro-
cedure.
. If optional Intelligent Keys are added to
your vehicle, the memory storage proce-
dure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again for each Intelligent Key. For addi-
tional Intelligent Key information, see
“Keys” (P.3-2).
Selecting the memorized position
1. Move the shift lever to the P (Park) position.
2. Push the memory switch (1 or 2) fully for at least 1 second.
3. The driver’s seat, steering column and outside mirrors will move to the memor-
ized position with the indicator light flashing, and then the light will stay on
for approximately 5 seconds.
SETTING MEMORY FUNCTION
The status of the following settings can be
linked to the Intelligent Key and the memor-
ized settings can be available for each
Intelligent Key.
.
Climate control system
. Navigation system (if so equipped)
. Audio system
To use the memory function, lock the doors
with the Intelligent Key that is linked to the
settings.
To enable the memorized settings:
1. Carry the Intelligent Key that is linked to the settings, and unlock the doors by
pushing the driver’s door handle request
switch or UNLOCK
button on the
Intelligent Key.
2. Push the ignition switch to the “ON” position. “Connection with the key has
been done” will be displayed on the
screen and the memorized settings are
available (only when a new Intelligent
Key is used).
Pre-driving checks and adjustments3-29

3-30Pre-driving checks and adjustments
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
.When the vehicle speed is above 0 MPH
(0 km/h) or 4 MPH (7 km/h) for the Exit
function.
. When any of the memory switches are
pushed while the automatic drive posi-
tioner is operating.
. When the adjusting switch for the dri-
ver’s seat and steering column is turned
on while the automatic drive positioner is
operating.
. When the seat has already been moved
to the memorized position.
. When no seat position is stored in the
memory switch.
. When the shift lever is moved from the P
(Park) position to any other position.

EngineBefore starting the INFINITI Direct
Response Hybrid
®System .......................... 5-13
Break-in schedule ........................................ 5-116
Capacities and
recommended fluids/lubricants ................. 10-2
Changing engine coolant ............................... 8-6
Changing engine oil and filter ...................... 8-9
Checking engine coolant level ...................... 8-6
Checking engine oil level ............................... 8-8
Emergency engine shut off ......................... 5-12
Engine block heater .................................... 5-126
Engine compartment check locations ........ 8-3
Engine cooling system ................................... 8-5
Engine oil ........................................................... 8-8
Engine oil and oil
filter recommendation .................................. 10-5
Engine oil replacement indicator ............... 2-27
Engine oil viscosity ........................................ 10-6
Engine serial number .................................... 10-9
Engine specifications .................................... 10-7
If your vehicle overheats ............................. 6-12
Starting the INFINITI Direct Response
Hybrid
®System .............................................. 5-13
Engine coolant temperature gauge ................ 2-31
Entry/exit function
Automatic drive positioner ......................... 3-28
EV mode odometer and twin
trip odometer ........................................................ 2-30
Event Data Recorders (EDR) ......................... 10-19
Exhaust gas (carbon monoxide) ........................ 5-4 Explanation of scheduled
maintenance items ................................................. 9-5
F
F.M.V.S.S./C.M.V.S.S. certification label ...... 10-9
Fail-safe ................................................................. 5-16
Filter
Air cleaner housing filter ............................. 8-16
Changing engine oil and filter ...................... 8-9
Flashers (See hazard warning
flasher switch) ......................................................... 6-2
Flat tire ...................................................................... 6-3
Flat towing .......................................................... 10-16
Floor mat .................................................................. 7-6
Fluid Automatic Transmission Fluid (ATF) ....... 8-11
Brake fluid ....................................................... 8-12
Capacities and
recommended fluids/lubricants ................. 10-2
Engine coolant .................................................. 8-5
Engine oil ........................................................... 8-8
Power steering fluid ..................................... 8-11
Window washer fluid ................................... 8-12
Fog light switch ................................................... 2-43
Forward Emergency Braking (FEB) ............. 5-101
Forward Emergency Braking (FEB) system
warning light ......................................................... 2-14
Front passenger air bag and status light ..... 1-45
Front power seat adjustment ............................. 1-3
Front seat
Front seat adjustment .................................... 1-3 Front-seat active head restraints ...................... 1-8
Fuel
Capacities and
recommended fluids/lubricants ................. 10-2
Fuel economy ............................................... 5-117
Fuel information ............................................ 10-3
Fuel octane rating ......................................... 10-3
Fuel-filler cap .................................................. 3-21
Fuel-filler door ............................................... 3-21
Gauge .................................................................. 2-8
Fuel economy history .................. Hybrid System-7
Fuel efficient driving tips ................................. 5-116
Fuses ....................................................................... 8-19
Fusible links ........................................................... 8-19
G
Garage door opener HomeLink®Universal Transceiver ............ 2-62
Gas cap ................................................................... 3-21
Gauge ........................................................................\
. 2-6 Assist charge gauge ........................................ 2-8
Fuel gauge ......................................................... 2-8
Odometer ............................................................ 2-7
Speedometer ...................................................... 2-7
Tachometer ....................................................... 2-8
Trip computer ................................................. 2-28
General maintenance ................................... 9-2, 9-2
Glove box ............................................................... 2-51
11-3

11-6
N
New vehicle break-in ........................................ 5-116
Noise and vibration .................... Hybrid System-12
O
Odometer .................................................................. 2-7
Off-road recovery ................................................. 5-8
OilCapacities and
recommended fluids/lubricants ................. 10-2
Changing engine oil and filter ...................... 8-9
Checking engine oil level ............................... 8-8
Engine oil ........................................................... 8-8
Engine oil viscosity ........................................ 10-6
Oil filter replacement indicator .................. 2-27
Operation
Indicators for operation (vehicle
information display) ...................................... 2-23
Operation of the
hybrid system ................................. Hybrid System-4
“OTHER” indicator .............................................. 2-27
Outside air temperature .................................... 2-31
Outside mirrors .................................................... 3-26
Overheat, If your vehicle overheats ............... 6-12
Owner’s Manual/Service Manual
order information ............................................. 10-20
P
Panic alarm ............................................................ 3-15
Parking Brake break-in ............................................. 5-120
Parking brake operation .............................. 5-18
Parking on hills ............................................. 5-118
Parking brake break-in ................................... 5-120
Personal lights ...................................................... 2-60
Phone Car phone or CB radio ................................ 4-38
Power
Front seat adjustment .................................... 1-3
Power door lock ............................................... 3-4
Power outlet .................................................. 2-48
Power steering ............................................. 5-119
Power steering fluid ..................................... 8-11
Power windows ............................................. 2-54
Power moonroof ................................................. 2-57
Precautions Braking precautions ................................... 5-120
Child restraints ............................................... 1-19
Cruise control ................................................. 5-64
Maintenance ..................................................... 8-2
Seat belt usage ................................................. 1-9
Supplemental restraint system .................. 1-37
When starting and driving ............................ 5-4
Pre-crash seat belts with
comfort function ................................................... 1-12
Predictive Forward Collision Warning
(PFCW) system ................................................. 5-108 Push starting ......................................................... 6-12
Push-button ignition switch .................... 5-9, 5-10
Push-button ignition switch positions ........... 5-11
R
Radio
Car phone or CB radio ................................ 4-38
Rain-sensing auto wiper system ..................... 2-36
Rapid air pressure loss ......................................... 5-8
Readiness for inspection/maintenance
(I/M) test (US only) ........................................... 10-19
Rear door lock
Child safety rear door lock ........................... 3-6
Rear pocket ........................................................... 2-53
Rear sunshade ...................................................... 2-58
Rear window and outside mirror
defroster switch ................................................... 2-37
RearView Monitor ................................................. 4-3
Recorders Event data .................................................... 10-19
Regenerative brake ...................... Hybrid System-8
Registering your vehicle in
another country ................................................... 10-8
Remote keyless entry system .......................... 3-14
Reporting safety defects ................................ 10-18
Rise-up and build-up ........................................ 5-123
Road accident cautions .............. Hybrid System-3
Roadside assistance program ............................. 6-2
Rollover ..................................................................... 5-7
Roof
Moonroof ......................................................... 2-57