JVM0694X
Example
TIN (Tire Identification Number) for
a new tire (example: DOT XX XX XXX
XXXX)
1. DOT: Abbreviation for the “De- partment of Transportation”. The
symbol can be placed above, be-
low or to the left or right of the
Tire Identification Number.
2. Two-digit code: Manufacturer’s identification mark
3. Two-digit code: Tire size
4. Three-digit code: Tire type code (Optional) 5. Four numbers represent the week
and year the tire was built. For
example, the numbers 3103
means the 31st week of 2003. If
these numbers are missing, then
look on the other sidewall of the
tire.
Tire ply composition and material
The number of layers or plies of
rubber-coated fabric in the tire.
Tire manufacturers also must indicate
the materials in the tire, which include
steel, nylon, polyester, and others.
Maximum permissible inflation
pressure
This number is the greatest amount of
air pressure that should be put in the
tire. Do not exceed the maximum
permissible inflation pressure.
Maximum load rating
This number indicates the maximum
load in kilograms and pounds that can
be carried by the tire. When replacing
the tires on the vehicle, always use a
tire that has the same load rating as
the factory installed tire.
Term of “tubeless” or “tube type”
Indicates whether the tire requires an
inner tube (“tube type”) or not (“tube-
less”).
The word “radial”
The word “radial” is shown, if the tire
has radial structure.
Manufacturer or brand name
Manufacturer or brand name is
shown.
Other tire-related terminology:
In addition to the many terms that are
defined throughout this section, In-
tended Outboard Sidewall is (1) the
sidewall that contains a whitewall,
bears white lettering or bears manu-
facturer, brand and/or model name
molding that is higher or deeper than
the same molding on the other side-
wall of the tire, or (2) the outward
facing sidewall of an asymmetrical
tire that has a particular side that
must always face outward when
mounted on a vehicle.
Do-it-yourself8-31
8-32Do-it-yourself
TYPES OF TIRES
WARNING
.When changing or replacing tires, be
sure all four tires are of the same type
(Example: Summer, All Season or
Snow) and construction. An INFINITI
retailer may be able to help you with
information about tire type, size,
speed rating and availability.
. Replacement tires may have a lower
speed rating than the factory
equipped tires, and may not match
the potential maximum vehicle speed.
Never exceed the maximum speed
rating of the tire.
. Replacing tires with those not origin-
ally specified by INFINITI could affect
the proper operation of the TPMS.
. For additional information regarding
tires, refer to “Important Tire Safety
Information” (US) or “Tire Safety
Information” (Canada) in the War-
ranty Information Booklet.
All season tires
INFINITI specifies all season tires on some
models to provide good performance all year, including snowy and icy road condi-
tions. All Season tires are identified by ALL
SEASON and/or M&S (Mud and Snow) on
the tire sidewall. Snow tires have better
snow traction than All Season tires and may
be more appropriate in some areas.
Summer tires
INFINITI specifies summer tires on some
models to provide superior performance on
dry roads. Summer tire performance is
substantially reduced in snow and ice. Sum-
mer tires do not have the tire traction rating
M&S on the tire sidewall.
If you plan to operate your vehicle in snowy
or icy conditions, INFINITI recommends the
use of SNOW tires or ALL SEASON tires on
all four wheels.
Snow tires
If snow tires are needed, it is necessary to
select tires equivalent in size and load rating
to the original equipment tires. If you do not,
it can adversely affect the safety and
handling of your vehicle.
Generally, snow tires will have lower speed
ratings than factory equipped tires and may
not match the potential maximum vehicle
speed. Never exceed the maximum speed
rating of the tire.
If you install snow tires, they must be thesame size, brand, construction and tread
pattern on all four wheels.
For additional traction on icy roads, studded
tires may be used. However, some U.S.
states and Canadian provinces prohibit their
use. Check local, state and provincial laws
before installing studded tires. Skid and
traction capabilities of studded snow tires,
on wet or dry surfaces, may be poorer than
that of non-studded snow tires.
TIRE CHAINS
Use of tire chains may be prohibited accord-
ing to location. Check the local laws before
installing tire chains. When installing tire
chains, make sure they are the proper size
for the tires on your vehicle and are installed
according to the chain manufacturer’s sug-
gestions.
Use only SAE Class S chains. Class
“S” chains are used on vehicles with re-
stricted tire to vehicle clearance. Vehicles
that can use Class “S” chains are designed to
meet the SAE standard minimum clearances
between the tire and the closest vehicle
suspension or body component required to
accommodate the use of a winter traction
device (tire chains or cables). The minimum
clearances are determined using the factory
equipped tire size. Other types may damage
your vehicle. Use chain tensioners when
recommended by the tire chain manufac-
turer to ensure a tight fit. Loose end links of
the tire chain must be secured or removed to
prevent the possibility of whipping action
damage to the fenders or underbody. If
possible, avoid fully loading your vehicle
when using tire chains. In addition, drive at
a reduced speed. Otherwise, your vehicle
may be damaged and/or vehicle handling
and performance may be adversely affected.
Tire chains must be installed only on the
rear wheels and not on the front wheels.
Never install tire chains on a TEMPORARY
USE ONLY spare tire.
Do not use tire chains on dry roads. Driving
with tire chains in such conditions can cause
damage to the various mechanisms of the
vehicle due to some overstress.
SDI1662
CHANGING WHEELS AND TIRES
Tire rotation
INFINITI recommends rotating the
tires every 5,000 miles (8,000 km).
(See “Flat tire” (P.6-3) for tire repla-
cing procedures.)
As soon as possible, tighten the
wheel nuts to the specified torque
with a torque wrench.Wheel nut tightening torque:80 ft-lb (108 N·m)
The wheel nuts must be kept tigh- tened to the specification at all times.
It is recommended that wheel nuts be
tightened to the specification at each
tire rotation interval.
WARNING
.
After rotating the tires, check
and adjust the tire pressure.
. Retighten the wheel nuts when
the vehicle has been driven for
600 miles (1,000 km) (also in
cases of a flat tire, etc.).
. Do not include the T-type spare
tire or any other small size
spare tire in the tire rotation.
. For additional information re-
garding tires, refer to “Impor-
tant Tire Safety Information”
(US) or “Tire Safety Informa-
tion” (Canada) in the Warranty
Information Booklet.
Do-it-yourself8-33
8-34Do-it-yourself
SDI1663
Wear indicator
Wear indicator location marks.
The locations are shown by
“
”, “TWI”, etc. depending on
tire types.
Tire wear and damage
WARNING
. Tires should be periodically in-
spected for wear, cracking, bul-
ging or objects caught in the
tread. If excessive wear, cracks,
bulging or deep cuts are found, the tire(s) should be replaced.
. The original tires have built-in
tread wear indicators. When
wear indicators are visible, the
tire(s) should be replaced.
. Tires degrade with age and use.
Have tires, including the spare,
over 6 years old checked by a
qualified technician, because
some tire damage may not be
obvious. Replace the tires as
necessary to prevent tire failure
and possible personal injury.
. Improper service of the spare
tire may result in serious perso-
nal injury. If it is necessary to
repair the spare tire, it is re-
commended you visit an
INFINITI retailer for this ser-
vice.
. For additional information re-
garding tires, refer to “Impor-
tant Tire Safety Information”
(US) or “Tire Safety Informa-
tion” (Canada) in the Warranty
Information Booklet.
Replacing wheels and tires
When replacing a tire, use the same size,
tread design, speed rating and load carrying
capacity as originally equipped. (See “Speci-
fications” (P.10-7) for recommended types
and sizes of tires and wheels.)
WARNING
. The use of tires other than those
recommended or the mixed use of
tires of different brands, construc-
tion (bias, bias-belted or radial), or
tread patterns can adversely affect
the ride, braking, handling, ground
clearance, body-to-tire clearance,
tire chain clearance, speedometer
calibration, headlight aim and bum-
per height. Some of these effects may
lead to accidents and could result in
serious personal injury.
. If your vehicle was originally
equipped with 4 tires that were the
same size and you are only replacing
2 of the 4 tires, install the new tires
on the rear axle. Placing new tires on
the front axle may cause loss of
vehicle control in some driving condi-
tions and cause an accident and
personal injury.
.If the wheels are changed for any
reason, always replace with wheels
which have the same off-set dimen-
sion. Wheels of a different off-set
could cause premature tire wear,
degrade vehicle handling character-
istics and/or interference with the
brake discs/drums. Such interference
can lead to decreased braking effi-
ciency and/or early brake pad/shoe
wear. See “Wheels and tires” (P.10-
7) of this manual for wheel off-set
dimensions.
. Since the spare tire is not equipped
with the TPMS, when a spare tire is
mounted or a wheel is replaced, the
TPMS will not function and the low
tire pressure warning light will flash
for approximately 1 minute. The light
will remain on after 1 minute. Have
your tires replaced and/or TPMS
system reset as soon as possible. It
is recommended you visit an INFINITI
retailer for these services.
. Replacing tires with those not origin-
ally specified by INFINITI could affect
the proper operation of the TPMS.
. The TPMS sensor may be damaged if
it is not handled correctly. Be careful
when handling the TPMS sensor. .
When replacing the TPMS sensor, the
ID registration may be required. It is
recommended you visit an INFINITI
retailer for ID registration.
. Do not use a valve stem cap that is
not specified by INFINITI. The valve
stem cap may become stuck.
. Be sure that the valve stem caps are
correctly fitted. Otherwise the valve
may be clogged up with dirt and
cause a malfunction or loss of pres-
sure.
. Do not install a damaged or deformed
wheel or tire even if it has been
repaired. Such wheels or tires could
have structural damage and could fail
without warning.
. The use of retread tire is not recom-
mended.
. For additional information regarding
tires, refer to “Important Tire Safety
Information” (US) or “Tire Safety
Information” (Canada) in the War-
ranty Information Booklet.
Wheel balance
Unbalanced wheels may affect vehicle hand-
ling and tire life. Even with regular use,
wheels can get out of balance. Therefore,
they should be balanced as required. Wheel balance service should be performed
with the wheels off the vehicle. Spin
balancing the wheels on the vehicle could
lead to mechanical damage.
For additional information regarding tires,
refer to “Important Tire Safety Information”
(US) or “Tire Safety Information” (Canada) in
the INFINITI Warranty Information Booklet.
Care of wheels
See “Cleaning exterior” (P.7-2) for details
about care of the wheels.
Spare tire (TEMPORARY USE
ONLY (T-type) spare tire)
Since the spare tire is not equipped with the
TPMS, when a spare tire is mounted (TEM-
PORARY USE ONLY or conventional), the
TPMS will not function.
Observe the following precautions if the T-
type spare tire must be used, otherwise your
vehicle could be damaged or involved in an
accident.
WARNING
.
The T-type spare tire should be used
for emergency use. It should be
replaced with the standard tire at
the first opportunity to avoid possi-
Do-it-yourself8-35
ENGINE
ModelVQ35HR
Type Gasoline, 4-cycle
Cylinder arrangement 6-cylinder, V-slanted at 60°
Bore × Stroke in (mm) 3.760 × 3.205
(95.5 × 81.4)
Displacement cu in (cm
3)213.45 (3,498)
Firing order 1-2-3-4-5-6
Idle speed rpm
No adjustment is necessary.
Ignition timing
(B.T.D.C.) degree/rpm
Spark plug FXE22HR11
Spark plug gap (Normal) in (mm) 0.043 (1.1)
Camshaft operation Timing chain
This spark ignition system complies with the Canadian standard ICES-002.
STI0425
VQ35HR engine
WHEELS AND TIRES
Road wheel
TypeSizeOffset in (mm)
Conventional 18 × 8J 1.69 (43)
Spare 17 × 4T 1.18 (30)
Tire
TypeSize Pressure PSI
(kPa) [Cold]
Conventional P245/50R18
99V
36 (250)
Spare (T-type) T165/80D17
104M 60 (420)
Technical and consumer information10-7
SPECIFICATIONS
S
SafetyChild seat belts ............................................... 1-16
Reporting safety defects .......................... 10-18
Seat adjustment
Front power seat adjustment ....................... 1-3
Front seats ......................................................... 1-3
Seat belt(s)
Child safety ..................................................... 1-16
Infants ............................................................... 1-17
Injured persons ............................................... 1-12
Larger children ............................................... 1-17
Precautions on seat belt usage .................... 1-9
Pre-crash seat belts with
comfort function ............................................ 1-12
Pregnant women ........................................... 1-12
Seat belt cleaning ............................................. 7-7
Seat belt extenders ....................................... 1-15
Seat belt maintenance ................................. 1-16
Seat belt warning light and chime ............ 2-17
Seat belts ............................................................ 1-9
Seat belts with pretensioners .................... 1-49
Shoulder belt height adjustment ............... 1-15
Small children .................................................. 1-17
Three-point type ............................................ 1-12
Seat(s)
Climate controlled seats .............................. 2-45
Driver-side memory ...................................... 3-28
Heated seats .................................................. 2-44
Seats .................................................................... 1-2 Security system
Vehicle security system ................................ 2-32
Security system (INFINITI Vehicle
Immobilizer System)
Engine start ..................................................... 2-34
Servicing air conditioner (See heater and
air conditioner) ..................................................... 4-32
Servicing climate control ................................... 4-37
Shift lever
Shift lock release ........................................... 5-17
Shift lock release, Transmission ....................... 5-17
SHIFT “P” warning .............................................. 2-23
Shifting ................................................................... 5-15 Automatic transmission ............................... 5-14
Shoulder belt height adjustment ...................... 1-15
SNOW mode ......................................................... 5-19
Spare tire ............................................................... 10-7
Spark plugs ............................................................ 8-15
Speedometer ............................................................ 2-7
SPORT mode ........................................................ 5-19
Standard maintenance .......................................... 9-7
STANDARD mode ............................................... 5-19
Starting Before starting the INFINITI Direct
Response Hybrid
®System .......................... 5-13
Jump starting .................................................. 8-15
Precautions when starting and driving ..... 5-4
Push starting ................................................... 6-12
Starting the INFINITI Direct Response
Hybrid
®System .............................................. 5-13 Starting the INFINITI Direct Response
Hybrid
®System .................................................... 5-13
Starting the vehicle ............................................. 5-14
Status light, Front passenger air bag ............ 1-45
Steering
Heated steering wheel ................................. 2-43
Power steering ............................................. 5-119
Power steering fluid ..................................... 8-11
Steering lock release
malfunction indicator ................................... 2-23
Tilt/telescopic steering ................................ 3-24
Steering lock (if so equipped) ............................ 5-11
Storage ................................................................... 2-49
Storage box ........................................................... 2-52
Sun visors ............................................................... 3-24
Sunglasses holder ................................................ 2-50
Sunshade (rear) .................................................... 2-58
Supplemental air bag warning labels ............. 1-50
Supplemental air bag warning light .... 1-51, 2-17
Supplemental restraint system ........................ 1-37 Precautions on supplemental
restraint system ............................................. 1-37
Switch Autolight switch ............................................. 2-38
Fog light switch ............................................. 2-43
Hazard warning flasher switch .................... 6-2
Headlight switch ............................................ 2-38
Ignition switch ................................................ 5-14
Ignition switch automatic
transmission models ..................................... 5-14
Power door lock switch ................................. 3-5
11-7
11-8
Rear window and outside mirror
defroster switch ............................................. 2-37
Turn signal switch ......................................... 2-42
Vehicle Dynamic Control (VDC)
off switch ......................................................... 2-47
Warning systems switch ............................. 2-46
T
Tachometer ............................................................. 2-8
Theft (INFINITI Vehicle Immobilizer System)Engine start ..................................................... 2-34
Three-way catalyst ................................................ 5-5
Tilt/telescopic steering ...................................... 3-24
“TIMER” indicator ............................................... 2-24
Tire pressure
Low tire pressure warning light ................ 2-15
Tires Flat tire ............................................................... 6-3
Low tire pressure
warning system ........................... 5-5, 6-3, 8-26
Spare tire ......................................................... 8-35
Tire and Loading
information label ............................. 8-28, 10-10
Tire chains ........................................................ 8-32
Tire dressing ...................................................... 7-4
Tire pressure ................................................... 8-26
Tire Pressure Monitoring
System (TPMS) ........................... 5-5, 6-3, 8-26
Tire replacement indicator .......................... 2-27
Tire rotation .................................................... 8-33
Types of tires .................................................. 8-32 Uniform tire quality grading .................... 10-16
Wheel/tire size ............................................... 10-7
Wheels and tires ............................................ 8-26
Towing
Flat towing ................................................... 10-16
Tow truck towing .......................................... 6-13
Towing a trailer ........................................... 10-16
TPMS Tire Pressure
Monitoring System .................... 5-5, 6-3, 8-26
Trailer towing ..................................................... 10-16
Transceiver HomeLink
®Universal Transceiver ............ 2-62
Transmission Automatic Transmission Fluid (ATF) ....... 8-11
Driving with automatic transmission ....... 5-14
Transmission shift lever lock release ....... 5-17
Transmitter (See remote keyless
entry system) ........................................................ 3-14
Traveling or registering your vehicle in
another country ................................................... 10-8
Trip computer ....................................................... 2-28
Trip odometer ....................................................... 2-30
Trunk Interior trunk lid release .............................. 3-21
Light .................................................................. 2-62
Trunk hooks .................................................... 2-53
Trunk lid ........................................................... 3-18
Trunk lid release switch ............................... 3-18
Trunk open request switch ......................... 3-19
Trunk release power cancel switch ......... 3-20 Turn signal switch ............................................... 2-42
U
Underbody cleaning ............................................... 7-3
Uniform tire quality grading ........................... 10-16
V
Vanity mirror ......................................................... 3-27
Vanity mirror lights ............................................. 2-62
Vehicle
Dimensions ..................................................... 10-8
Identification number (VIN) ....................... 10-8
Loading information .................................. 10-12
Security system .............................................. 2-32
Vehicle Dynamic Control (VDC)
off switch ......................................................... 2-47
Vehicle Dynamic Control
(VDC) system ................................................ 5-122
Vehicle dynamic control (VDC)
warning light ................................................... 2-17
Vehicle information display .............................. 2-21
Vehicle recovery ................................................... 6-15
Ventilators ............................................................. 4-32
VQ35HR engine ..................................................... 8-3
W
Warning Hazard warning flasher switch .................... 6-2
Lights ................................................................ 2-11