9
Automatic Power Windows
Your power windows have an
automatic adjusting function
to ensure windows close
completely to help seal against
wind noise and weather leaks.
• When the front doors are
being opened, the windows
automatically lower slightly
to avoid contact between the
windows and the side roof panels.
If your vehicle’s battery is discharged
or disconnected, your power window
automatic function will not operate.
• Refer to your Owner’s Manual
for information to initialize your
power window system.
• If the power window functions
do not operate properly after
initializing the system, it is
recommended that you have
your vehicle checked by an
Infiniti retailer.
Please see your Owner’s Manual for important
safety information, system limitations, and
additional operating and feature information.
User Registration
1
3
Up to three users can have their driving positions, navigation, climate
controls, etc., memorized.
To register a new user:
1. Press the MENU button 1 below the lower display.
2. Touch the right arrow key on
the lower display until “Infiniti
InTuition”
2 is displayed. Then
touch the “Infiniti
InTuition” key
2.
3. Touch “User List”.
4. Touch “Add New”. From here, you can edit Name 3
and Icon 4.
5. Touch “OK” 5 when finished.Please see your Owner’s Manual for important
safety information, system limitations, and
additional operating and feature information.
4
5
2
16
HomeLink® Universal Transceiver
(if so equipped)
HomeLink
To program the HomeLink® Universal Transceiver:
1 . Position the handheld transceiver 1-3 in (26-76 mm) away from
the HomeLink surface, keeping the HomeLink indicator light
in view.
2 . Press and hold the desired HomeLink button and the handheld
transmitter button simultaneously until the HomeLink indicator
light flashes slowly and then rapidly.
3. Both buttons may now be released.
4 Press and hold the HomeLink button, and a blinking light that
turns to a solid, continuous light after 2 seconds will display.
5 . At the receiver of the device press and release the program
button (this button can typically be found near the hanging
antenna wire of the device you are programing into HomeLink).
6. Press and hold the programed HomeLink button for 2 seconds
and release.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
REMOTE ENGINE START
(if so equipped)
• The remote engine start system
must be enabled in the vehicle
settings within the lower display.
To start your vehicle remotely:
1. Press the lock button 1
to lock the vehicle.
2. Press and hold the remote start
button 2 within 5 seconds of
pressing the lock button 1 and
the engine will start.
• To start driving, depress the
brake pedal and press the ignition
switch START/STOP button.
State laws may apply; review
local laws before using.
ROLL DOWN FEATURE
The windows can be opened remotely using your Infiniti Intelligent Key.
• Press and hold the unlock button 3 to open the windows and
moonroof (if so equipped) remotely.
• If the unlock button 3 is released, the windows will stop.
To resume the roll down feature, press and hold the
unlock button
3 again.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Infiniti Intelligent Key System
1
2
3