2018 INFINITI Q50 HYBRID flat tire

45
Certain tire manufacturers speed ratings are
voided if the tire is repaired.
Although a tire was properly repaired, internal
structural damage resulting from the puncture
may have occurred.
Sometime later the damage may cause the tire
to be removed from service.
If the tire has a puncture in the tread which
exceeds 1/4 inch (6mm), the tire must be
replaced. If any tire has sustained a puncture,
have the tire inspected internally by a tire
retailer for possible damage that may have
occurred.
Improper mounting and inflation procedures
can cause an explosion of the tire/rim
assembly. Only specially trained persons should
perform these tasks. Contact your tire store or
retailer for assistance.
CAUTION - Never, under any circumstance,
introduce a flammable substance into a tire.
WHEEL ALIGNMENT AND
BALANCING
Wheel alignment and balancing are important
for safety and maximum mileage from your
tires. Check how your tires are wearing at
least once a month. If your tires are wearing
unevenly, such as the inside shoulder of the
tire wearing faster than the rest of the tread,
or if you detect excessive vibration, your
vehicle may be out of alignment or balance.
These conditions not only shorten the life of
your tires, but adversely affect the handling characteristics of your vehicle which could
be dangerous. If you detect irregular wear or
vibration, have your alignment and balance
checked immediately. Tires which have been
run underinflated will show more wear on the
shoulders than in the center of the tread.
HARD BRAKING
You must inspect your tires after any hard
braking circumstances or after tires have slid
on the pavement. This can cause a flat spot in
a section of the tire tread.
TIRE SPINNING
Never spin your tires above a speedometer
reading of 35 mph (55 km/h) if your vehicle
becomes stuck. The centrifugal force
generated by the free spinning tire/wheel
assembly may cause a sudden tire explosion,
resulting in vehicle damage and/or serious
personal injury or death. Never allow anyone
to stand near or behind a tire spinning at high
speed while attempting to push a vehicle that
is stuck. When in mud, sand, snow, ice or other
slippery conditions, do not indulge in excessive
wheel spin. In such conditions, with automatic
transmission vehicles, by accelerating the
engine excessively, it is possible to spin one of
the drive tires beyond its speed capability. This
is also true when balancing a drive tire/wheel
assembly using the engine of the vehicle to
spin the wheel.
TIRE TREAD
Tires must be replaced when the depth of
the tread reaches 2/32 inch (1.6 mm). Tires
are manufactured with tread wear indicators
molded into the tire grooves which indicate
tread wearout. As tires approximate 2/32 inch
(1.6 mm) wearout, the tread gauge becomes
thinner and more vulnerable to the effects
of road hazards. Also, worn tires are more
subject to hydroplaning, which can cause loss
of control. Therefore, visual tire inspection
becomes more crucial as the tires wear out.
WORN TIRES
Never drive on worn tires. Tires should be
replaced by trained personnel when 2/32nds
of an inch tread depth remains, as indicated
by the tread wear indicators molded into the
tread grooves. In most states, it is illegal to
drive with less than 2/32nds of an inch of
tread remaining.
TIRE MIXING
For best performance select tires similar in
size and load rating to the original equipment
tires. It is recommended that the same size
and type of tire be used on all four wheel
positions. In certain tires, casing ply material
and ply construction may vary as indicated
on the sidewall of the tire. When changing
or replacing tires, it is preferred that all four
tires are the same construction type (i.e., High
Performance, All Season, Mud & Snow) and
construction (Radial or Bias Ply). Before
IMPORTANT TIRE SAFETY INFORMATION¹
(Continued on next page)

46
mixing tires of different types on a vehicle in
any configuration, be sure to check the vehicle
Owner’s Manual for its recommendations.
Tires which meet the Rubber Manufacturer’s
Association (RMA) definition of mud and
snow tires are marked M/S, M+S, M&S. On
such tires, this designation is molded into the
sidewall. Tires without this notation are not
recommended for mud and/or snow driving.
If snow tires are needed, it is necessary
to select tires equivalent in size and load
rating to the original equipment tires.
Always fit performance snow tires in sets of
four (4) for optimum mud & snow traction
and maintenance of vehicle handling
characteristics. If you do not, it may adversely
affect the safety and handling of your vehicle.
It is also important to check the vehicle
Owner’s Manual before mixing or matching
tires on 4-wheel drive vehicles as this may
require special precautions.
Please refer to your Owner’s Manual for more
information on tire replacement precautions.
TIRE ROTATION
Tires on your Infiniti vehicle should be rotated
every 7,500 miles or as irregular wear
develops. If irregular wear becomes apparent
or if the wear rate on the tires is perceptibly
uneven, the tires should be rotated in such
a way to alleviate the problem. Check your
vehicle for any mechanical problems and
correct if necessary. Any rotation pattern or
procedure may be followed including those indicated in the Owner’s Manual. Some tires
have arrows on the sidewall showing the
direction in which the tire should turn. When
rotating this type of tire, care must be taken
to maintain the proper turning direction as
indicated by the arrows. Some vehicles have
different tire sizes specified for front and rear
axles. Tires on these vehicles should not be
rotated side to side (unless they are non-
directional). Where a temporary type spare tire
is available, it should not be included in the tire
rotation schedule. Such tires are intended for
temporary use only.
REPLACING TWO TIRES
If your vehicle was originally equipped with
four tires that were the same size and you are
only replacing two of the four tires, install the
new tires on the rear axle. Placing new tires
on the front axle may cause loss of vehicle
control in some driving conditions and cause
an accident and personal injury.
TRAILER TOWING
If you anticipate towing a trailer, you should
see a tire retailer for advice concerning the
correct size of tire and pressure. Tire size and
pressure will depend on the type and size of
the trailer and hitch utilized, but in no case
must the maximum cold inflation pressure or
the tire load rating be exceeded. Check the tire
decal and your Owner’s Manual for further
recommendations on trailer towing.
TIRE ALTERATIONS
Do not perform any alterations on your tires.
Alterations may prevent proper performance,
leading to tire damage, which can result in an
accident. Tires which become unserviceable
due to alterations such as truing, whitewall
inlays, addition of balancing or sealant liquids,
may be excluded from warranty coverage.
Consult your tire warranty.
HIGH-PRESSURE TEMPORARY
SPARE TIRES
1.
The high-pressure spare tire in your Infiniti
vehicle is designed for temporary use only
and must not be used continually as a
regular tire. The standard tire should be
repaired and/or replaced as soon as possible.
2. Avoid driving over obstacles that may
damage the tire through impact or cutting,
such as potholes, glass, metal, etc.
3. Speed must not exceed 50mph (80km/h) for
non-speed-rated temporary spare tires.
4. Temporary spare tires have a limited
treadlife which can vary depending on road
conditions and your driving habits. The
spare tire should be returned to the trunk as
soon as the standard tire can be repaired or
replaced.
5. Because the high-pressure spare tire was specifically designed for your car, it should
not be used on any other vehicle.
6. Do not use snow chains on your high- pressure spare. This could cause damage to
your vehicle.
IMPORTANT TIRE SAFETY INFORMATION¹
(Continued on next page)

47
7. Check the tire’s cold inflation pressure
monthly and maintain at 60psi (4.2kg/cm2)
even when not in use.
8. The high-pressure spare tire should not be
used with any other rim nor should standard
tires, wheel covers, or trim rings be used on
the high-pressure spare tire rim which was
originally installed.
9. When the tread wear indicator appears on
the tire, replace it only with the same type
spare tire.
10. Do not enter an automatic carwash with a
temporary spare tire fitted.
11. Do not make a sharp turn or apply the brakes suddenly when driving on a high-
pressure temporary spare.
NOTE: When using any temporary type spare
tire, be sure to follow the vehicle Owner’s
Manual instructions.
TIRE STORAGE
All tires should be stored in a cool dry place
indoors so that there is no danger of water
collecting inside them.
When tires are stored they should be stored
in a cool place away from sources of heat
and ozone such as hot pipes and electric
generators. Be sure that surfaces on which
tires are stored are clean and free from grease,
gasoline or other substances which could
deteriorate the rubber. (Tires exposed to these
materials during storage or driving could be
subject to sudden failure.)
To Avoid Damage to your Tires and Possible
Accident:
• Check tire pressure at least once a month when tires are cold and before long trips.
• Do not underinflate/overinflate.
• Do not overload.
• Drive at moderate speeds, observe legal limits.
• Avoid driving over potholes, obstacles, curbs or edges of pavement.
• Avoid excessive wheel spinning.
• If you see any damage to a tire, replace with spare and see the tire manufacturer’s
retailer or your Infiniti retailer.
For further information, the Consumer Tire
Guide on passenger tire care, safety and
mileage performance is available in the United
States by writing the Tire Industry Safety
Council, Box 1801, Washington, D.C. 20013.
IMPORTANT TIRE SAFETY INFORMATION¹

48INFINITI TOTAL OWNERSHIP EXPERIENCE® BENEFITS
ROADSIDE ASSISTANCE
As part of the Infiniti Total Ownership
Experience® , Roadside Assistance is available
to you, 24 hours a day, 365 days a year, for
emergency roadside assistance should the
need arise for any of the following items:
• Mechanical Breakdown
• Flat Tire
• Accident/Collision (One-way tow – loaner vehicle not included)
• Out of Gas
• Lock-out service
• Dead 12V Battery
All Roadside Assistance services are provided
exclusively by Cross-Country Motor Club,
Inc., Boston, Massachusetts 02155, except
in Alaska, California, Oregon, Wisconsin and
Wyoming, where services are provided by
Cross-Country Motor Club of California, Inc.,
Boston, Massachusetts 02155.
HOW TO USE ROADSIDE ASSISTANCEShould one of the disablements listed
above occur, simply call the toll free number,
1-800-662-6200, and advise the Roadside
Assistance Representative of your name, the
vehicle identification number (VIN) of your car,
your location, and the nature of the problem.
(When travelling in Canada call 1-800-835-
0221.) The VIN can be found imprinted on
a plate affixed to the upper dashboard on
the driver’s side of your Infiniti. The VIN is
also printed on the permanent Infiniti Total Ownership
® Program card which will be sent
to you approximately 6 weeks after purchase
of your new Infiniti.
COVERAGERoadside Assistance is provided for all Infiniti
vehicles from the date the vehicle is delivered
to the first retail buyer or otherwise put into
use, whichever is earlier, for a period of 48
months, without regard to mileage.
Roadside Assistance is available to anyone
operating the Infiniti vehicle with the
authorization of the owner. [For purpose of
Roadside Assistance benefits, “owner” includes
the lessee of a leased vehicle.] These services
are transferable with the resale of the vehicle
for the time remaining on the original Infiniti
new vehicle limited warranty coverage period.
Roadside Assistance is available throughout
the Continental United States and Canada.
ON-SITE AND TOWING SERVICEDepending on the type of vehicle problem you
are experiencing, the Roadside Assistance
Representative will determine the appropriate
roadside assistance and/or flatbed (towing)
service to be dispatched. In most cases, minor
disablement services such as flat tire change,
lock-out service, out-of-gas delivery, etc., can
be performed onsite so that you can be on
the road again as soon as possible. There is
no charge for the dispatch of onsite or towing
service. Any charges for the replacement of
keys, gas or non-warranty items will be your
responsibility at the time of the repair or
service. Whenever possible, flatbed (towing) service
will be dispatched for mechanical disablements
or accident/ collisions which render the vehicle
inoperative. There is no charge for the towing
service. Roadside Assistance will arrange to
transport the vehicle to the nearest Infiniti
retailer , if one is located within 250 miles,
or to another authorized alternate service
facility. Warranty covered repairs will be
provided for under the terms of the applicable
express Infiniti limited warranty. However, any
nonwarranty or accident/collision repairs will
be your responsibility.
NOTE: You may be required to sign a receipt at
the time of disablement to acknowledge receipt
of the Roadside Assistance service rendered.
EXCLUSIONSRoadside Assistance is not a warranty and
is not provided under any Infiniti or Nissan
warranty,
but is a service which is provided
to you as part of the Infiniti Total Ownership
Experience
® to minimize any unforeseen
vehicle operation inconvenience. Potential
liability is expressly limited to the cost of
the listed benefits and does not extend to
incidental or consequential damages such
as loss of use inconvenience, loss of pay, or
commercial loss.
Roadside Assistance benefits exclude any
costs related to repairs, parts replacement,
labor, etc. which are incurred as a result of
accident/collision, vehicle abuse, racing,
(Continued on next page)