Quick Reference Guide I 4544 I Quick Reference Guide
DRIVING
You can select the drive mode
according to your preference or the
road condition.
Each time you press the button, the
drive mode is changed as follows :
DRIVE MODE INTEGRATED CONTROL SYSTEM
SPORT mode provides sporty
riding.
COMFORT mode provides smooth
and comfortable driving.
Sport mode
SMART mode automatically
adjusts the driving mode
(ECO ↔ COMFORT ↔ SPORT)
in accordance with the driver's
driving habits.
Smart mode (2.0T only)Comfort mode
Comfort mode is not displayed on
the instrument cluster.
The driving mode will be continuously maintained, as selected when
the engine is restarted. However, except if it is in SPORT mode. SPORT
mode will change to COMFORT mode, when the engine is restarted.
ECO mode improves fuel efficiency
for eco-friendly driving.
ECO mode (not on Eco 1.6T)
Comfort
Sport
ECO (Not on Eco 1.6T)Smart (2.0T only)
To improve your fuel efficiency:
• Drive smoothly and accelerate at a moderate rate.
• Avoid heavy accelerations.
• Maintain steady cruising speed.
• Adjust the vehicle speed to the traffic condition and avoid speed
changes.
• Avoid unnecessary braking.
• Keep the tires inflated to the recommended tire pressure.
• Don’t idle the engine longer than necessary.
DRIVING
The BSD (Blind Spot Detection)
system uses a radar sensor to alert
the driver while driving.
It senses the rear side territory of the
vehicle and provides information to
the driver.
1 Blind Spot Detection
2 Lane Change Assist
3 Rear Cross Traffic Alert
The system will activate if vehicle speed exceeds 20 mph.
BLIND SPOT DETECTION SYSTEM (BSD)
• To turn the BSD on, press the BSD button.
(indicator illuminated)
• To turn the BSD off, press the
BSD button again.
When the transmission is put in R (Reverse), the system provides an
alert if a vehicle is approaching from the sides.
Rear Cross Traffic Alert
1
2
3
SONATAHYUNDAI
Quick Reference Guide I 4746 I Quick Reference Guide
CRUISE CONTROL/SMART CRUISE CONTROL
2
3
1
4
1
2
Setting Vehicle Distance
(Smart Cruise Control only)
The vehicle to vehicle distance 1 will
automatically activate when you set
the cruise speed 2.
This system assist you in setting the
distance from the vehicle ahead and
will maintain the selected distance
without you depressing the accelerator
or the brake pedal.
If your vehicle is equipped with Advanced Smart Cruise Control and
you wish to eliminate the vehicle distance function, you can change
cruise control setting to a standard setting.
Press the Cruise Control button on the steering wheel to turn on
Cruise Control. Then press and hold the vehicle distance button for
more than 2 seconds to toggle between Smart Cruise Control (SCC)
and Cruise Control (CC) mode.
Please refer to your Owner's Manual for more information.
Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as follows:
The Cruise Control system allows
you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
Distance 4Distance 3Distance 2
Distance 1
1 Turn On/Off the Cruise Control.
2 Resume or Increase
the Cruise Control speed.
3 Set or Decrease
the Cruise Control speed.
4 Cancel the Cruise Control.
Cruise Control can be cancelled
when the brake pedal is pressed.
DRIVINGMEMO
SONATAHYUNDAI
