2018 Hyundai Santa Fe Sport View button

GETTING STARTED
SANTA FE SPORT
05 04
HYUNDAI
Telescopic
HEADREST ADJUSTMENT
To Raise Headrest:
Pull headrest up.
To Lower Headrest:
Press lock button while pressing
down on headrest.
To Adjust Headrest Forward:
Pull forward to 1 of 3 positions
To Adjust Backward:
Press lock button and push
headrest backwards.
SEAT BELT ADJUSTMENT (Front seat)
Pull up to raise.Press button and
push down to
lower.
FUEL FILLER LIDSTEERING WHEEL ADJUSTMENTS
TiltNOTE
Do not adjust while driving.
1. Pull the lever
A down to release.
2. Set the angle B and distance
C
3. Pull the lever
A up to lock.
A
B
C
REAR SEAT FOLDING
From cargo areaRear center seatback
FEATURES AND CONTROLSCheck the engine oil regularly between recommended oil changes.
Storing
1. Adjust the driver’s seat position,
outside rearview mirror position and
instrument panel illumination intensity.
2.
Press the SET button. The system
will beep once.
3.
Press one of the memory buttons
(1 or 2) within 5 seconds.
The system will beep twice.
DRIVER POSITION MEMORY SYSTEM
NOTE
Transmission must be in P (Park).
Recalling
Press the desired memory button(1 or 2). The system will beep once.
NOTE
ANDROIDAUTO™
ANDROIDAUTO™

FEATURES AND CONTROLS
SANTA FE SPORT
07 06
HYUNDAI
DRIVER'S MAIN CONTROLSCENTRAL DOOR LOCK SWITCH
Outside rearview mirrors Press L (left) or R (right) on the
switch. Then adjust the mirror by
using the directional switch (
).
Power window lock switch Disables the power window
switches on the rear passenger
doors only.
Window auto down/upPress past detent to fully
open/close window.
HEADLIGHTS AND FOG LIGHTS
Parking light positionAuto light positionHeadlight position
Headlight delayHeadlights may stay on for 15 seconds after exiting and locking
vehicle. Press remote lock button twice to turn headlights off.
See Owner’s Manual for more detail
.
High beam / Smart high beamFog light
Turn signals and lane change signals
Flashing headlights
All doors and liftgate will lock
All doors and liftgate will unlock
PULL
PUSH
DRL OFF position
NOTETo turn off high beam, pull
the lever towards you.
Smart High Beam Function1. Select auto position on stalk.
2. Push lever forward to engage Auto High beam.
3. Push lever forward again to disengage.
ANDROIDAUTO™
ANDROIDAUTO™
Rotate switch up to turn on fog lights.
Rotate switch up again to turn off fog
lights.

FEATURES AND CONTROLS
SANTA FE SPORT
11 10
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Home Link
Standard Programming To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside
buttons, HomeLink
® Channel 1 and Channel 3 Buttons, until the
indicator light begins to flash (after 20 seconds). Release both
buttons. Do not hold the buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
® buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
INTERIOR LIGHTS
Push the lens
to turn the
map lamp on or off.
ON Map lamp and room lamp will turn on.OFF The lights stay off at all times,
even if a door is opened.DOOR Map lamp and room lamp
comes on when a door is opened.
Press the switch to turn the light
on or off.
Without sunroof
With sunroofRoom lamp
ANDROIDAUTO™
ANDROIDAUTO™

MULTIMEDIA
SANTA FE SPORT
29 28
HYUNDAI
AUDIO Press POWER button
to turn radio on.
• TUNING / LISTENING TO CHANNELS
1. Press the Radio
button.
2. Turn the TUNE/ENTER
knob to select the desired channel and press the knob.


NOTE
A clear view of the southern sky helps ensure XM
®
radio reception.
•
SETTING PRESET MEMORY BUTTONS (FM/AM/SXM®)
Press and hold any preset button (1-6)
until an audible beep is heard to store
current channel.
•
ADJUSTING THE SOUND CONTROL
1. Press the SETUP
button.
2. Select “Sound Settings” by turning and pressing the TUNE/ENTER
knob.
3. Select “Bass,” “Middle,” “Treble,” “Fader,” or “Balance” by turning and
pressing the TUNE/ENTER
knob.
4. Adjust the sound by turning and pressing the TUNE/ENTER
knob.
Please refer to your Owner’s Manual for more detailed information on how to use your audio system.
Complimentary XM subscription ends three months following the vehicle date of sale.
Please contact XM Radio at 1-800-XM-RADIO (1-800-967-2346) to renew your XM subscription.AUX, USB, AND iPod
® PORT
Use the jack to connect an external
audio device and listen to it through
the audio system speakers in your
vehicle.
Preconditions: • Ignition is OFF
• Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock)
• Gearshift level is in the P (Park) position
• Brake pedal is not depressed
• Engine hood is securely closed
• All the doors are closed and locked
• The tailgate or trunk lid is closed
• The security/panic system is not activated
• The proximity key is not inside the vehicle
• The battery power is not low
• Vehicle is located in an open area
• It has been less than 4 days since last vehicle ignition off
• Vehicle located in area with good cell receptionRemote Start will terminate: • After 10 minutes or after selected engine timer runs out
• Brake is pressed without proximity key inside vehicle
• Alarm is triggered without proximity key inside vehicle
• Door/trunk is opened from inside the vehicleNotice: Laws in some communities may restrict the use of the
features that remotely start the engine. For example, some laws may
require a person using the remote start feature to have the vehicle in
view when doing so or limit the length of time a vehicle engine may
idle. Please check local and state regulations for any requirements
and restrictions on remote starting of vehicles and engine idling time.
WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a
motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon
monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches,
dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals
unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn
on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice
or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when
parking the vehicle.
ANDROIDAUTO™
ANDROIDAUTO™

MULTIMEDIA
SANTA FE SPORT
31 30
HYUNDAI
RADIO
VOL
PWRPUSH
MEDIA
PHONE
BLUELINK
SEEK TRACK
TUNE
ENTERSETUPFILE
RADIO
VOLPWRPUSH
MEDIA NAVI
PHONE BLUELINK
SEEK
TRACK
TUNE
ENTER
SETUPMAP
VOICE
INFO
FILE
Press POWER button
to turn radio on.
• TUNING/LISTENING TO CHANNELS
1. Press BAND button
on screen to select FM/AM/SiriusXM
®.
2. ROTATE TUNE knob
to desired channel.
NOTE
A clear view of the southern sky helps ensure SiriusXM
®
radio
reception.
•
SETTING PRESET MEMORY BUTTONS
Press and hold any preset button
on the screen until
an audible beep is heard to store current channel.
•
ADJUSTING THE SOUND CONTROL
1. Press the SETUP button
and press the SOUND
button on screen to display the Sound Settings
screen.
2. Touch on-screen arrows to adjust desired setting.
Press POWER button
to turn radio on.
• TUNING/LISTENING TO CHANNELS
1. Press BAND button
on screen to select FM/AM/SiriusXM
®.
2. ROTATE TUNE knob
to desired channel.
NOTE
A clear view of the southern sky helps ensure SiriusXM
® radio
reception.
•
SETTING PRESET MEMORY BUTTONS
Press and hold any preset button
on the screen until
an audible beep is heard to store current channel.
•
ADJUSTING THE SOUND CONTROL
1. Press the SETUP button
and press the SOUND
button on screen to display the Sound Settings
screen.
2. Touch on-screen arrows to adjust desired setting.
Audio modeNAVIGATION
DISPLAY AUDIO
ANDROIDAUTO™
ANDROIDAUTO™

FEATURES AND CONTROLS
SANTA FE SPORT
47 46
HYUNDAI
REARVIEW CAMERABLIND SPOT DETECTION SYSTEM (BSD)
Type B and Navigation radioThe rearview camera will activate when
the ignition switch is ON and the shift
lever is in the R (Reverse) position.
The BSD system sensor senses the
rear side territory of the vehicle and
provides information to the driver.
Press the BSD switch. The indicator
will illuminate on the button. If vehicle
speed exceeds 9mph the system will
activate. Press the switch again to
deactivate the system.Blind spot detection (BSD)Warning range is dependent on your
vehicle speed. Example, if your vehicle
speed is 9.3 mph greater than other
vehicles, the warning is not active.Lane change assist (LCA)When a vehicle is approaching at
high speed, the warning is not active.Rear Cross-traffic Alert (RCTA)When your vehicle moves (below 6mph)
in Reverse, the sensor detects the
approaching vehicles and the warning is
active.
Rearview display
MULTI-VIEW CAMERA SYSTEM
This parking support system displays
an all-around view of the vehicle when
parking. Press the switch to activate/
deactivate the system.Operating conditionsThe shift lever is in D, N, or R
position with the ignition ON
The vehicle speed is less than
12.4 mph
The Autonomous Emergency Braking (AEB)
system is designed to detect and monitor the
vehicle ahead or detect a pedestrian in the
roadway and warn the driver if a collision is
imminent.
To operate the system, select the AEB
(Autonomous Emergency Braking) in the LCD
cluster display under User Settings. Please
refer to your Owner’s Manual for further
information.
AUTONOMOUS EMERGENCY BRAKING (AEB)
ANDROIDAUTO™
ANDROIDAUTO™