2018 Hyundai Santa Fe window

FEATURES AND CONTROLS
SANTA FE
07 06
HYUNDAI
HEADLIGHTS AND FOG LIGHTS
Parking light positionAuto light positionHeadlight position
Headlight delayHeadlights may stay on for 15 seconds after exiting and locking
vehicle. Press remote lock button twice to turn headlights off.
See Owner’s Manual for more detail
.
High beam / Smart high beamFog light
Turn signals and lane change signals
Flashing headlights
PULL
PUSH
DRL OFF position
NOTETo turn off high beam, pull
the lever towards you.
Smart High Beam Function1. Select auto position on stalk.
2. Push lever forward to engage Auto High beam.
3. Push lever forward again to disengage.
DRIVER'S MAIN CONTROLSCENTRAL DOOR LOCK SWITCH
Outside rearview mirrors Press L (left) or R (right) on the
switch. Then adjust the mirror by
using the directional switch (
).
Power window lock switch Disables the power window
switches on the rear passenger
doors only.
Window auto down/upPress past detent to fully
open/close window.All doors will lock
All doors will unlock

FEATURES AND CONTROLS
SANTA FE
09 08
HYUNDAI
SUNROOFSliding the sunroof
To Open
Slide switch rearward.To CloseSlide switch forward.To TiltPress the switch up.To CloseSlide the switch forward or pull
the switch down.
Tilting the sunroofNOTE

To operate the sunshade, press open or close button.
Sunshade
open/close button
MIST -
Single wipe
OFF -
Off
INT -
Intermittent wipe
LO -
Normal wiper speed
HI -
Fast wiper speed
WIPER AND WASHER
Front windshield wash
with brief wipesIntermittent wipe time
adjustmentFast wiper speed
Slow wiper speedRear wiper/washer control
HI - Fast wiper speed
LO - Normal wiper speed
OFF - OffRear window wash
with brief wipes
PULL
PUSH
Smart LiftgateRefer to Owner’s Manual for more information on operating Smart Liftgate
feature.POWER LIFTGATE
Options for opening liftgate• Press exterior liftgate soft-touch switch. • Press and hold key fob liftgate button. • Press front seat overhead console button.
(must be in P (park) to operate.)Options for closing liftgate• Press button on edge of open liftgate.• Press front seat overhead console button.

MULTIMEDIA
SANTA FE
17 16
HYUNDAI
Type C
Sync temperature control
selection button Passenger’s temperature
control button Climate control information
screen selection button
3rd row blower climate control
ON/OFF button
3rd row fan speed control knob
3rd blower ON/OFF button
3rd row mode selection button
3rd row temperature control knob
Type A,B
DEFROSTING / DEFOGGING
3. Set the fan speed to
the highest setting. 2. Set the temperature
control towards
warmer setting.1. Press the front
windshield defrost
button.
SYSTEM OFF MODEPressing the OFF button will place the system in the off mode.• Front blower will turn off.• Outside (fresh) air position
selected.• Vented air at last set temperature.
AUTOMATIC HEATING
AND COOLING
2. Set the driver's
temperature control
to the desired setting. 1. Press the AUTO
button.
The modes, fan speeds, air
intake, and air-conditioning will be
controlled automatically according
to the temperature setting.NOTETo reduce tendency of the glass
fogging and also improve visibility,
keep the interior surface of the
windshield clean by wiping it with
a clean cloth and glass cleaner.
In addition, select air intake control
to the outside (fresh) air position
whenever possible while operating
the vehicle.Press the SYNC button to
operate the driver and passenger
side temperature individually.
SYNC BUTTON
Press to activate /
deactivate
the rear defroster.
REAR WINDOW DEFROSTER
Changing the
direction of the
air flow as follows:
MODE SELECTION
Floor &
Defrost
Face
Level
Bi-
Level
Floor
Level
AIR INTAKE CONTROL
Recirculated air positionOutside (fresh) air position
Type B Type B Type A Type AThe auto defogging system automatically controls moisture of the
windshield inside while the climate control system is operating.
This indicator illuminates when the auto defogging system senses
the moisture of inside the windshield and has activated.
AUTO DEFOGGING SYSTEM

MULTIMEDIA
SANTA FE
21 20
HYUNDAI
VOICE RECOGNITION TIPS
To Answer a Call: • Press
button on the steering wheel.
To Reject a Call: • Press
button on the steering wheel.
To Adjust Ring Volume: • Use the VOLUME buttons on the steering wheel. To Transfer a Call to the Phone
(Private Call): • Press and hold
button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call: • Press
button on the steering wheel.
BLUETOOTH OPERATIONAL TIPSIn the following situations you or the other party may have difficulty
hearing each other:
1. Keep the Bluetooth volume to a low level. High level volume may result
in distortion and echo.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when
the air conditioning fan is at the max speed.
To redial previously dialed number,
press and hold .Steering wheel bluetooth control
VOLUME

Raises or lowers speaker volume.MUTEMute the microphone during a call.TALKActivates voice recognition.CALL

Places and transfers calls.ENDEnds calls or cancels functions.
Your vehicle is equipped with Voice Recognition technology which allows
drivers to operate their phones without having to take their eyes off the road
to minimize distractions.
Voice recognition performance may be affected if driving with windows
and sun roof open; when the heating-cooling system is on; when passing in
a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command. Press the
key, the following commands are available:
Command FunctionMore Help Provides guidance on commands that can be used anywhere in the system
Help Provides guidance on commands that can be used within the current mode.
Calls Calls saved in Contacts. Ex) Call “John Smith”
Dial Call can be made by dialing the spoken numbers. Ex) Call “123”
Phone Provides guidance on Phone related commands. After saying this command,
say “Call History”, “Contacts” to execute corresponding functions.
Call History Displays the Call History screen.
Contacts Displays the Contacts screen. After saying this command, say the name of a
contact saved in the Contacts to automatically connect the cell.
Dial Number Display the Dial number screen. After saying this command, you can say the
number what you want to call.

MULTIMEDIA
SANTA FE
25 24
HYUNDAI
Preconditions: • Ignition is OFF
• Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock)
• Gearshift level is in the P (Park) position
• Brake pedal is not depressed
• Engine hood is securely closed
• All the doors are closed and locked
• The tailgate or trunk lid is closed
• The security/panic system is not activated
• The proximity key is not inside the vehicle
• The battery power is not low
• Vehicle is located in an open area
• It has been less than 4 days since last vehicle ignition off
• Vehicle located in area with good cell receptionRemote Start will terminate: • After 10 minutes or after selected engine timer runs out
• Brake is pressed without proximity key inside vehicle
• Alarm is triggered without proximity key inside vehicle
• Door/trunk is opened from inside the vehicleNotice: Laws in some communities may restrict the use of the
features that remotely start the engine. For example, some laws may
require a person using the remote start feature to have the vehicle in
view when doing so or limit the length of time a vehicle engine may
idle. Please check local and state regulations for any requirements
and restrictions on remote starting of vehicles and engine idling time
.

WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a
motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon
monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches,
dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals
unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn
on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice
or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when
parking the vehicle.
You can download the Blue Link mobile app to your
compatible smart phone from the following sites:

• iPhone
® — Apple
® App Store
• Android
™ — Google Play
™
Remote Start enables you to remotely start your vehicle from virtually
anywhere. For vehicles equipped with full-automatic temperature control,
you can also enable climate control remotely and turn on the front window
defroster, ensuring a warm or cool car is ready to go when you are.
•
To use this feature, you must have a Blue Link Personal
Identification Number (PIN). To create or change your PIN,
log on to www.MyHyundai.com.
Remote Start MyHyundai with Blue Link App• Remote Start will automatically shut off after 10 minutes or after selected
engine timer runs out.
• While this feature is active, the parking lights will blink until vehicle is
turned off or when vehicle is in operation.
• To continue operation of the vehicle, the proximity key must be inside
the vehicle with the driver prior to pressing the brake and being able to
move the gearshift from the P (Park) position.Remember:
Visit HyundaiBlueLink.com FAQs to
see a list of compatible devices.
NOTE
Remote Start is not available on all models. Remote Start is only
available for Push Start equipped vehicle with an Automatic Transmission.
Scan to see list of
compatible devices and
to download the app.

FEATURES AND CONTROLS
44
HYUNDAI
BEFORE DELIVERY☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE☐ S E T T I R E P R E S U R E L F R F R R L R ☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE
REARVIEW CAMERABLIND SPOT DETECTION SYSTEM (BSD)
The rearview camera will activate when
the ignition switch is ON and the shift
lever is in the R (Reverse) position.
The BSD system sensor senses the
rear side territory of the vehicle and
provides information to the driver.
Press the BSD switch. If vehicle speed
exceeds 9mph the system will activate.
Press the switch again to deactivate the
system.Blind spot detection (BSD)Warning range is dependent on your
vehicle speed. However, if your vehicle
speed differences is 9 mph above
other vehicles, the warning is not active.Lane change assist (LCA)When a vehicle is approaching at
high speed, the warning is not active.Rear Cross-traffic Alert (RCTA)When your vehicle moves (below 6mph)
in Reverse, the sensor detects the
approaching vehicles and the warning is
active.
Rearview display
Key Websites: - Hyundai website - www.hyundai.com
- Hyundai owner website - www.myhyundai.com
- Bluetooth phone compatibility - www.hyundaiusa.com/bluetooth
- Blue Link - www.MyHyundai.com
SANTA FE CUSTOMER DELIVERY CHECK LIST HYUNDAI OWNER DEALERSHIP NAME SALES CONSULTANT DATE VIN PREVIOUS VEHICLE Sales Consultant Date Sales Manager Date
Customer Date
Email
@
SANTA FE
45
HYUNDAI VEHICLE OWNER PRIVACY POLICY
Your Hyundai vehicle may be equipped with technologies and services
that use information collected, generated, recorded or stored by the
vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain
how these technologies and services collect, use, and share this
information.
You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com
website at https://www.hyundaiusa.com/owner-privacy-policy.aspx
If you would like to receive a hard copy of our Vehicle Owner Privacy
Policy, please contact our Customer Connect Center at:
Hyundai Motor America
Hyundai Customer Connect Center
P.O. Box 83835
Phoeniz, AZ 85071-3835
800-633-5151
[email protected]
Hyundai's Customer Connect Center representatives are available
Monday through Friday, between the hours of 5:00 AM and 7:00 PM
PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST
(English). For Customer Connect Center assistance in Spanish or
Korean, representatives are available Monday through Friday between
6:30 AM and 3:00 PM PST.