FEATURES AND CONTROLS
SANTA FE
13 12
HYUNDAI
Warning and indicator lights
Tachometer
Speedometer
Turn signal indicatorsLCD display
Type AEngine temperature gaugeFuel gauge
Select "Trip Computer" mode by pressing the
MODE button
.
To change the trip mode as follows, press the
MOVE button .
INSTRUMENT PANEL ILLUMINATIONTRIP COMPUTER
Move the control knob left or right to
adjust the brightness.
TRIP A
•Tripmeter [A]
•Average Vehicle Speed [A]
•Elapsed Time [A]
TRIP B
•Tripmeter [B]
•Average Vehicle Speed [B]
•Elapsed Time [B]FUEL ECONOMY•Distance To Empty
•Average Fuel Economy
•Instant Fuel Economy
Digital speedometer
WARNINGS AND INDICATORS
Seat belt
warning light
Charging system
warning light
Airbag warning light
Electronic Brake force Distribution (EBD)
System warning light
ABS warning light
Front fog light indicator
Light ON indicator
Electric Power Steering
(EPS) warning lightHigh beam indicator
Parking brake & Brake
fluid warning light
Engine oil pressure
warning lightMalfunction Indicator
Lamp (MIL)
Low fuel level warning
light
Electronic Stability Control
(ESC )
indicator
Electronic Stability Control
(ESC ) OFF indicatorTurn signal indicator
ECO indicator
Immobilizer indicatorDownhill Brake Control (DBC)
indicator
SPORT Mode indicator
Light (if equipped)AWD LOCK indicatorAWD warning lightEngine coolant
temperature warning light
Cruise ON indicator
Cruise SET indicator
Low Tire Pressure Warning Light/
TPMS system malfunction light
AUTO HOLD indicator
Light (if equipped)
MULTIMEDIA
SANTA FE
21 20
HYUNDAI
VOICE RECOGNITION TIPS
To Answer a Call: • Press
button on the steering wheel.
To Reject a Call: • Press
button on the steering wheel.
To Adjust Ring Volume: • Use the VOLUME buttons on the steering wheel. To Transfer a Call to the Phone
(Private Call): • Press and hold
button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call: • Press
button on the steering wheel.
BLUETOOTH OPERATIONAL TIPSIn the following situations you or the other party may have difficulty
hearing each other:
1. Keep the Bluetooth volume to a low level. High level volume may result
in distortion and echo.
2. When driving on a rough road, high speeds and/or with the window open.
3. When the air conditioning vents are facing the microphone and/or when
the air conditioning fan is at the max speed.
To redial previously dialed number,
press and hold .Steering wheel bluetooth control
VOLUME
Raises or lowers speaker volume.MUTEMute the microphone during a call.TALKActivates voice recognition.CALL
Places and transfers calls.ENDEnds calls or cancels functions.
Your vehicle is equipped with Voice Recognition technology which allows
drivers to operate their phones without having to take their eyes off the road
to minimize distractions.
Voice recognition performance may be affected if driving with windows
and sun roof open; when the heating-cooling system is on; when passing in
a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command. Press the
key, the following commands are available:
Command FunctionMore Help Provides guidance on commands that can be used anywhere in the system
Help Provides guidance on commands that can be used within the current mode.
Calls
Dial
Phone Provides guidance on Phone related commands. After saying this command,
say “Call History”, “Contacts” to execute corresponding functions.
Call History Displays the Call History screen.
Contacts Displays the Contacts screen. After saying this command, say the name of a
contact saved in the Contacts to automatically connect the cell.
Dial Number Display the Dial number screen. After saying this command, you can say the
number what you want to call.
MULTIMEDIA
SANTA FE
23 22
HYUNDAI
BLUETOOTH PHONE OPERATIONVehicle must be in Park to complete the pairing process.Pairing tutorials, phone compatibility and
Operational tips can be found through the
Smart QR code using the QR reader
application on your Smartphone.BLUETOOTH PHONE PAIRINGNOTEAfter pairing is completed, transfer of the contact list to the audio system
will begin ( if your phone is supported). 1. Press PHONE button.
2. Search for car name from the bluetooth list from your phone and pair
device.
3. Input the passkey.
(The initial passkey is 0000.)
4. Bluetooth
® becomes connected.
Phone setup (Pairing phone) with Display Audio and Navigation
RADIO
VOL
PWRPUSH
ME
PHONE
BLU
SEEK TRA
BLUE LINK TELEMATICS SYSTEM
• SOS • Navigation Services • Blue Link
Blue Link subscription is required. To enroll, please visit your dealership
or MyHyundai.com.
Press the
button for access to the voice-response menu of services.
- You can say:
Service Link
Roadside Assistance
Blue Link Account Services
Help
Cancel
Press the button for Destination Search Powered by Google
TM.
- For vehicle equipped with factory-installed navigation systems.
Press the
button for SOS Emergency Assistance.
Visit HyundaiBlueLink.com for more information or refer to your Blue Link
User’s Manuall for detailed information on system operation.
For immediate assistance with subscription services, please call
1-855-2BLUELINK (1-855-225-8354).Google
TM
is a registered trademark of Google, Inc.
MULTIMEDIA
SANTA FE
27 26
HYUNDAI
AUDIO
Audio mode Display Audio
NAVIGATION
AUX, USB, AND iPod
® PORT
Use the jack to connect an external
audio device and listen to it through the
audio system speakers in your vehicle.RADIO
VOL
PWRPUSH
MEDIA
PHONE
BLUELINK
SEEK TRACK
TUNE
ENTERSETUPFILE
Press POWER button
to turn radio on.
FEATURES AND CONTROLS
SANTA FE
37 36
HYUNDAI
SEAT WARMER AND VENTILATED SYSTEMFront seat
Rear seat
Push the switch to warm the rear seat. OFF
HIGH (
)
LOW (
)
HIGH (
)
MIDDLE (
)
LOW (
)
OFF
CHILD-PROOF REAR DOOR LOCK
Lock (
)
Insert a key into the hole and
turn it to the lock (
) position.
UnlockInsert a key into the hole and turn it
counter clockwise to unlock position.
Push the upper portion of
the switch to warm or the
lower portion to cool.
CLOCK ADJUSTMENTS
Press SETUP button
and press the
on-screen CLOCK button.
Enable GPS Time and the time and
date will automatically set
RADIO
VOL
PWRPUSH
MEDIA
PHONE
BLUELINK
SEEK TRACK
TUNE
ENTERSETUPFILE
With Display Audio
With Navigation
Press SETUP button
and press
the on-screen CLOCK button.
Press on-screen arrows to adjust
the time and date.
RADIO
VOLPWRPUSH
MEDIA NAVIPHONE BLUELINK
SEEK
TRACK
TUNE
ENTER
SETUPMAPVOICEINFOFILE
FEATURES AND CONTROLS
SANTA FE
41 40
HYUNDAI
To improve your fuel efficiency:• Drive smoothly and accelerate at a moderate rate.
• Avoid heavy acceleration.
• Maintain steady cruising speed.
• Adjust the vehicle speed to the traffic condition and avoid speed
changes.
• Avoid unnecessary braking.
• Keep the tires inflated to the recommended tire pressure.
• Don’t idle the engine longer than necessary. ELECTRIC PARKING BRAKE (EPB)
or
Stop the vehicle then pull
the EPB switch.
Applying
Move shift lever from P to R, N or D
while depressing the brake pedal.
Releasing
Press the EPB switch while
depressing the brake pedal.
NOTE:
If necessary, emergency braking is possible by pulling and holding the
EPB switch.
AUTO HOLDTo cancel the AUTO HOLD operation, press the AUTO HOLD switch again.The Auto Hold feature assists in steep hill areas.
It holds the brake until the accelerator pedal is
pressed.
1.
Press the AUTO HOLD switch.
WHITE
2.
Stop the vehicle by pressing the
brake pedal. The brakes will remain
engaged even if the brake pedal is
released.
GREEN
3.
The brakes will release when the
accelerator pedal is pressed with
transmission in D, R or manual mode.
WHITE
ELECTRONIC STABILITY CONTROL (ESC)
The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.Press
to turn ESC on/off.
NOTEIt is recommended to always have
the ESC system ON.
DRIVE MODE INTEGRATED CONTROL SYSTEM
You can select the drive mode
according to your preference or the
road condition.
The system initializes to the NORMAL
mode (except ECO mode) after the
engine has been
turned off and on.Each time you press the button, the
drive mode is changed as follows :
Sport mode focuses on engaging driving dynamics by adjusting the
steering feel along with the responsiveness of the engine and
transmission. Sport mode Normal mode is not displayed on the
instrument cluster.
Eco mode system helps to improve fuel efficiency. When the Eco mode
system is activated, the vehicle acceleration, gear shift points and air
conditioning performance will be reduced to conserve the fuel
consumption. Normal mode provides regular daily driving performance with some
fuel efficiency. When Normal mode is selected, no indicator will
illuminate on the instrument cluster.
ECO mode Normal modeNormal
ECO Sport
FEATURES AND CONTROLS
SANTA FE
43 42
HYUNDAI
AC 115V PLUG
1. Dashboard button must be switched on
to use cargo area AC115V plug. Engine
should be running when
AC 115V plug is in use.
2. Rotate safety plate
A on outlet for use.A
MULTI-VIEW CAMERA SYSTEM
This parking support system displays
an all-around view of the vehicle when
parking. Press the switch to activate/
deactivate the system.Operating conditionsThe shift lever is in D, N, or R
position with the ignition ON
The vehicle speed is less than
12.4 mph
The Autonomous Emergency Braking (AEB)
system is designed to detect and monitor the
vehicle ahead or detect a pedestrian in the
roadway and warn the driver if a collision is
imminent.
To operate the system, select the AEB
(Autonomous Emergency Braking) in the LCD
cluster display under User Settings. Please
refer to your Owner’s Manual for further
information.
AUTONOMOUS EMERGENCY BRAKING (AEB)
• To turn LDWS on,
press the LDWS switch
• To turn LDWS off,
press the switch again. The Lane Departure Warning
System detects the lane on the
road and warns the driver if the
vehicle leaves the lane when the
vehicle speed is over 37mph.
LANE DEPARTURE WARNING SYSTEM (LDWS)
FEATURES AND CONTROLS
44
HYUNDAI
BEFORE DELIVERY☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE☐ S E T T I R E P R E S U R E L F R F R R L R ☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE
REARVIEW CAMERABLIND SPOT DETECTION SYSTEM (BSD)
The rearview camera will activate when
the ignition switch is ON and the shift
lever is in the R (Reverse) position.
The BSD system sensor senses the
rear side territory of the vehicle and
provides information to the driver.
Press the BSD switch. If vehicle speed
exceeds 9mph the system will activate.
Press the switch again to deactivate the
system.Blind spot detection (BSD)Warning range is dependent on your
vehicle speed. However, if your vehicle
speed differences is 9 mph above
other vehicles, the warning is not active.Lane change assist (LCA)When a vehicle is approaching at
high speed, the warning is not active.Rear Cross-traffic Alert (RCTA)When your vehicle moves (below 6mph)
in Reverse, the sensor detects the
approaching vehicles and the warning is
active.
Rearview display
Key Websites: - Hyundai website - www.hyundai.com
- Hyundai owner website - www.myhyundai.com
- Bluetooth phone compatibility - www.hyundaiusa.com/bluetooth
- Blue Link - www.MyHyundai.com
SANTA FE CUSTOMER DELIVERY CHECK LIST HYUNDAI OWNER DEALERSHIP NAME SALES CONSULTANT DATE VIN PREVIOUS VEHICLE Sales Consultant Date Sales Manager Date
Customer Date
Email
@
SANTA FE
45
HYUNDAI VEHICLE OWNER PRIVACY POLICY
Your Hyundai vehicle may be equipped with technologies and services
that use information collected, generated, recorded or stored by the
vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain
how these technologies and services collect, use, and share this
information.
You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com
website at https://www.hyundaiusa.com/owner-privacy-policy.aspx
If you would like to receive a hard copy of our Vehicle Owner Privacy
Policy, please contact our Customer Connect Center at:
Hyundai Motor America
Hyundai Customer Connect Center
P.O. Box 83835
Phoeniz, AZ 85071-3835
800-633-5151
[email protected]
Hyundai's Customer Connect Center representatives are available
Monday through Friday, between the hours of 5:00 AM and 7:00 PM
PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST
(English). For Customer Connect Center assistance in Spanish or
Korean, representatives are available Monday through Friday between
6:30 AM and 3:00 PM PST.