2018 Hyundai Santa Fe auto light

[x] Cancel search: auto light

Page 367 of 570

Hyundai Santa Fe 2018  Owners Manual 575
Driving your vehicle
3. Push the toggle switch down(SET-), and release it at the
desired speed.
The Set Speed and Vehicle-to- Vehicle Distance on the LCD dis-
play will illuminate.
4. Release the

Page 370 of 570

Hyundai Santa Fe 2018  Owners Manual Driving your vehicle
78
5
To resume Smart Cruise Control
set speed
If any method other than the
CRUISE toggle switch was used to
cancel cruising speed and the sys-
tem is still activated, the cruising

Page 383 of 570

Hyundai Santa Fe 2018  Owners Manual 591
Driving your vehicle
Detecting sensor
The sensors are located inside the
rear bumper.
Always keep the rear bumper clean
for proper operation of the system.
Warning message
 This warning message ma

Page 384 of 570

Hyundai Santa Fe 2018  Owners Manual Driving your vehicle
92
5
If there is a problem with the BSD
system, a warning message will
appear and the light on the switch
will turn off. The system will turn off
automatically. You have your vehi

Page 395 of 570

Hyundai Santa Fe 2018  Owners Manual 5103
Driving your vehicle
Hazardous driving conditions
When hazardous driving conditions
are encountered such as water,
snow, ice, mud, sand, or similar haz-
ards, follow these suggestions:
 Drive cau

Page 398 of 570

Hyundai Santa Fe 2018  Owners Manual Driving your vehicle
106
5
Driving at night
Because night driving presents more
hazards than driving in the daylight,
here are some important tips to
remember:
 Slow down and keep more distance
betwee

Page 405 of 570

Hyundai Santa Fe 2018  Owners Manual 5113
Driving your vehicle
Dont let your parking brake
freeze
Under some conditions your parking
brake can freeze in the engaged
position. This is most likely to happen
when there is an accumulation o

Page 424 of 570

Hyundai Santa Fe 2018  Owners Manual What to do in an emergency
46
IF THE ENGINE WILL NOT START
If engine doesnt turn over or
turns over slowly
1. If your vehicle has an automatictransaxle, be sure the shift lever is
in N (Neutral) or P