2018 HYUNDAI I20 set clock

)' 
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
''#)+*'&*+$)"*+(Clock (if equipped)To set the time:
The ignition switch must be in the
ACC position or the ON position.
1. Press the SETUP CLOCK button.
2. Select "Clock" →"Clock Settings"
by using the TUNE knob.
3. Set the clock by using the TUNE knob.
Digital clock (if equipped)
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
When the ignition switch is in the
ACC or ON position, the clock but-
tons operate as follows:Press the "H" button to advance the
time displayed by one hour.Press the "M" button to advance the
time displayed by one minute.To change the 12 hour format to the
24 hour format, press the "H" and
"M" button simultaneously for more
than 4 seconds.
For example, if the "H" and "M" but-
ton is pressed when the time is 10:15
p.m., the display will change to 22:15
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
WARNING
OIB044038
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
WARNING

##!'%$&%" '&$
(( Continued)
• In case of product malfunction, please contact your place of pur-
chase or After Service ce nter.
• Placing the audio system within an electromagnetic environment may
result in noise interference.
• Prevent caustic solutions such as perfume and cosmetic oil from
contacting the dashboard because
they ma y cause damage or discol-
oration.
RadioRadio ModeChange Mode:
[RADIO
]button
• You can toggle between the radio modes using
[RADIO]
button.
• If
[SETUP/CLOCK]
 [Display] 
[Mode Popup] is turned [Off], then
each time you press the
[RADIO]
button, you can toggle between
radio modes (FM1 ➟ FM2 ➟AM ➟
DRM ➟FM1).
• The radio mode popup will not be displayed when
[SETUP/CLOCK]
button [Display] [Mode popup]
is turned [Off].
Search Frequency:
[SEEK/TRACK]
button• Searches the previous/next broad- cast frequencies.
- Short press of button: searchesthe previous/next available
broadcast frequency.
- Long press of button: Frequency is controlled by 1 step quickly.
When the button is released after
pressing and holding, searches
the previous/next available
broadcast frequency.Change Frequency:
TUNE
knob
Changes frequency by turning the
knob left/right. You can seek avail-
able frequencies manually.Saved Frequency:
[1] ~ [6]
(Preset)
buttons
• Pressing the button: Plays the fre-
quency saved in the corresponding
button.
• Pressing and holding the button (more than 1.0 second): Saves the
currently playing broadcast to the
selected button and sound a BEEP.

#
!'%$&%" '&$
IInformation- Using Bluetooth
®
(BT) Audio
(if equipped)
• Bluetooth
®Audio Mode can be used
only when a Bluetooth
®
phone has
been connected.
• Bluetooth
®
Audio Mode will not be
available when connecting mobile
phones that do not support this fea-
ture.
• If a Bluetooth
®
Phone is being used
to play music and receives an
incoming or outgoing phone call,
then the music will stop.
• Moving the Track up/down while playing Bluetooth®audio mode may
result in pop noises with some
mobile phones.
• Bluetooth
®
streaming audio may
not be supported in some mobile
phones.
• When returning to Bluetooth
®
Audio mode after ending a call, the
mode may not automatically restart
in some mobile phones.
• Receiving an incoming call or mak- ing an outgoing call while playing
Bluetooth
®
Audio may result in
audio interference.
Media ModeChange Mode:
[MEDIA]
button
• Each time the button is pressed, the media mode popup will be dis-
played or closed.
• The media mode popup will not be displayed when
[SETUP/CLOCK]
button [Display] [Mode popup]
is turned [Off].
You can select a menu in the mode
popup by using the
[1]
~
[6]
(Preset) buttons or
TUNE
knob.
• If media device(USB, AUX) is con- nected, then it will automatically
operate. Once it is disconnected,
the previous mode will be restored.
• The Audio/Bluetooth
®(BT) Audio*/
AUX volume can also be con-
trolled.
* if equipped
Information
When you connect an Apple device,
playback does not start automatically.
Repeat:
[1 RPT]
button
• Repeats the current song or repeats all songs within the current
folder.
•iPod
®
mode: Repeat Song ➟
Repeat Off
• USB mode: Repeat Song ➟
Repeat Folder ➟ Off
Shuffle:
[2 SHFL]
button
• Plays all songs within the current
folder(category) or play all songs in
random order.
•iPod
®
mode: Shuffle All ➟ Shuffle
Off
• USB mode: Shuffle Folder ➟
Shuffle All ➟ Off
i
i

#!'%$&%" '&$
IInformation
• Up to 2000 phone numbers can be
downloaded from a single, paired
Bluetooth
®
device.
• If the caller’s number is listed in Contacts, the caller’s name will be
displayed. Otherwise, only the num-
ber will be displayed. In some
Bluetooth
®
devices, the phone num-
ber may not be displayed.
• In some Bluetooth
®
devices, the Use
Private feature may not be supported.
• In some Bluetooth®
devices, the
Switch feature may not be supported.
• The phone number may not be properly displayed in some
Bluetooth
®
devices.
• During a phone call on a Bluetooth
®
Handsfree, you cannot access other
modes, such as Radio and Setup.
• Depending on handset types, the in- call volume the other party hears
may differ. If the other party hears
your voice too low or too loud,
adjust the mic volume.
Phone settingsPress the
[PHONE]
button Select
[Phone settings].
• Moves to a screen of Phone Settings. Refer to Setup ➟ Phone
manual for more information.
SetupDisplayPress the
[SETUP/CLOCK]
button 
Select [Display].
• Media Display: When playing an MP3 file, select the desired display
info from [Folder/File] or
[Artist/Title/Album].
• Mode Popup: During [On] state, press the
[RADIO]
or
[MEDIA]
but-
ton to display the mode change
popup.
• Text Scroll: If MP3 file name is too long to display, the file name is
scrolled from right to left.
i

#
!'%$&%" '&$
SSoundPress the
[SETUP/CLOCK]
button 
Select [Sound].
• Position: Selects the sound position.
• Tone: Selects the sound tone.
• Speed Dependent Vol.: Controls the volume level automatically
according to the speed of the vehi-
cle.
Date/TimePress the
[SETUP/CLOCK]
button 
Select [Date/Time].
• Set Time: Adjusts the number cur- rently in focus to set the [hour], and
press the
TUNE
knob to set the
[minute] and [AM/PM].
• Time Format: Sets the 12/24 hour time format of the audio system.
• Set Date: Adjusts the number cur- rently in focus to make the settings
and press the
TUNE
knob to move
to the next settings.
• Display(Power Off): Displays time/date on screen when the
audio system turns power off.
Phone (if equipped)Add New DevicePress the
[SETUP/CLOCK]
button 
Select [Phone]  Select [Add New
Device].
• The following steps are the same as those described in the section
[Pairing a New Device] on the pre-
vious page.
Connect/Disconnect DevicePress the
[SETUP/CLOCK]
button 
Select [Phone]  Select [Paired
devices].
• Displays the paired Bluetooth
®
device list.
• From the paired device list, select the device you want to connect or
disconnect.
Information
• Displays the icons when Bluetooth
®
device is connected.
: An icon appears when you make
a Bluetooth
®Audio connection.
: An icon appears when you make
a Bluetooth®Handsfree connection.
• Only one Bluetooth
®
device can be
connected at a time.
• Bluetooth
®
Handsfree and
Bluetooth
®Audio functions are sup-
ported. Handsfree and audio-sup-
ported devices, such as a Bluetooth
®
smartphone or audio, will function
normally.
• If the system is not stable due to a vehicle- Bluetooth
®
device commu-
nication error, delete the paired
device on each device and pair/con-
nect the Bluetooth
®
device again.
i

##!'%$&%" '&$Delete DevicesPress the [
[
SETUP/CLOCK]
button 
Select [Phone]  Select [Delete
Devices].
• Displays the paired Bluetooth
®
device list.
• When selecting from the list, the device is deleted.
Information
• When you delete a paired device, theCall History and Contacts stored in
the head unit are also deleted.
• To re-use a deleted device, you must pair the device again.Connection PriorityPress the
[SETUP/CLOCK]
button 
Select [Phone]  Select [Connection
Priority].
• Select the device to want to set the connection priority of paired
devices.
• If “None” is chosen, the Bluetooth
®
system will try to connect to the
last connected device, then to all
paired devices.
Information
• When the engine is running, the selected Bluetooth
®
device is auto-
matically connected. If you fail to
connect the selected device, the pre-
viously-connected device is auto-
matically connected, and if it also
fails, then it tries to connect all
paired devices sequentially.
• Depending on auto connection pri- ority, connection to a device may
take time.
• If a Bluetooth
®
device becomes dis-
connected due to being out of com-
munication range, turning the
device OFF, or a Bluetooth
®
com-
munication error, corresponding
Bluetooth
®
devices are automatical-
ly searched and reconnected.
• Even if you are outside, the Bluetooth
®
device will be automatically connected
once you are in the vicinity of the vehi- cle. If you do not want to automatical-
ly connect your Bluetooth
®
device,
turn off the Bluetooth
®feature in your
Bluetooth
®device.
(Continued) (Continued)
• In some Bluetooth
®devices, starting
the ignition while talking through
Bluetooth
®
enabled handsfree call
will result in the call becoming dis-
connected due to car handsfree call
transfer. If you use your phone out-
side the vehicle, turn off the
Bluetooth
®
feature in your phone.
LanguagePress the
[SETUP/CLOCK]
button 
Select [Language].
• Changes the display language.
Display OffPress the
[SETUP/CLOCK]
button 
Select [Display Off].
• Audio operation is maintained and only the screen will be turned Off.
In the Screen Off state, press any
button to turn the Screen On again.
i
i

##!'%$&%" '&$BBluetoothPress the
[SETUP]
button on the
audio system ➟ Select [Bluetooth].
• Connections: Control pairing, dele- tion, connection and disconnection
of Bluetooth
®
devices.
• Auto Connection Priority: Set the connection priority of B luetooth
®
devices when the vehicle is started.
• Download Contacts: Contacts can be downloaded from connectedBluetooth
®
devices.
Information
• When paired devices are deleted, the call history and contacts of the
device saved to the audio system are
deleted.
• For Bluetooth
®
connections with low
connection priority, some time may
be required for the connection to be
established.
• Contacts can be downloaded only from the currently connected
Bluetooth
®
device.
• If no Bluetooth
®
device is connected,
the Download Contacts button is
disabled.
SystemPress the
[SETUP]
button on the
audio system ➟ Select [System].
• Language: Change the user lan- guage.
• Default: Reset the audio system.
Information
The system resets to the default val-
ues, and all saved data and settings
are lost.Screen SaverSet the information displayed when
the audio system is switched off or
the screen is turned off.
Press the
[SETUP]
button on the
audio system ➟ Select [Screen
Saver].
• Analog: An analog clock is dis- played.
• Digital: A digital clock is displayed.
• None: No information is displayed.
Display OffTo prevent glare, the screen can be
turned off while the audio system in
operation.
Press the
[SETUP]
button on the
audio system ➟ Select [Display Off].
Information
Use ‘Screen Saver’ to set the informa-
tion to be displayed when the screen is
turned off.i
i
i

If your temperature gauge indicates
overheating, you experience a loss
of power, or hear loud pinging or
knocking, the engine may be over-
heating. If this happens, you should:
1.Pull off the road and stop as soonas it is safe to do so.
2.Place the shift lever in P (Park, for Continuously Variable Transaxle
vehicle) or neutral (for Manual
Transaxle vehicle) and set the
parking brake. If the air condition-
ing is ON, turn it OFF.
3.If engine coolant is running out under the vehicle or steam is com-
ing out from the hood, stop the
engine. Do not open the hood until
the coolant has stopped running or
the steaming has stopped. If there
is no visible loss of engine coolant
and no steam, leave the engine
running and check to be sure the
engine cooling fan is operating. If
the fan is not running, turn the
engine off. 4.Check for coolant leaking from the
radiator, hoses or under the vehi-
cle. (If the air conditioning had
been in use, it is normal for cold
water to be draining from it when
you stop.)
5.If engine coolant is leaking out, stop the engine immediately and
we recommend that you call an
authorized HYUNDAI dealer for
assistance.$$ !%%#$#%% %"!!!$#'#"'"' %'$%'&&&%
While the engine is run-
ning, keep hands,
clothing and tools away
from the moving parts
such as the cool ing fan
and drive belt to pre-
vent serious injury.WARNING
NEVER remove the
radiator cap or the
drain plug while the
engine and radiator are
hot. Hot coolant and
ste am may blow out under pres-
sure, causing serious injury.
Turn the engine off and wait until
the engine cools down. Use
extreme care when removing the
radiator cap. Wrap a thick towel
around it, and turn it c ounterclock-
wise slowly to the first stop. Step
back while the pressure is
released from the cooling sy stem.
When you are sure all the pres-
sure has been released, press
down on the cap, using a thick
towel, and continue turning coun-
terclockwise to remove it.WARNING