Quick Reference Guide I 33
32 I Quick Reference Guide
Elantra GT HYUNDAI
Use the input jack to connect an
external audio device and listen
to it through the audio system in
your vehicle.
iPod® is a trademark of Apple, Inc.
Destination search screen1 Address : Set destination by address search.2 Previous destinations : Select from previously inputted addresses
and POIs.3 Local search : Runs Google Local Search.4 POI categories : Select the desired item in the sub-categories.5 Gas stations : Select the desired destinations among the
searched gas stations.6 Restaurants : Select the desired destination among the searched
restaurants.7 Emergency : Select the desired destination among the searched
emergency facilities.8 Address Book : Search the destination with the address book.9 Coordinates : You can find a destination by entering the
coordinates of latitude and longitude.
Press [NAV] button in the navigation head unit, and finds a destination by
using the [Destination] menu.
2
3
4
15
6
7
8
9
MULTIMEDIA
AUX, USB AND iPod
® PORT
Type A Type B
This feature resets to OFF every time the
engine is restarted.The Auto Hold feature assists in hilly areas.
It applies the brake until the accelerator
pedal is pressed.
1. Press the AUTO HOLD
switch. When the AUTO HOLD
indicator is white, the system
is on and in standby mode.
WHITE
2. When you stop the vehicle
completely by using the brake
pedal and the AUTO HOLD
indicator turns green, Auto
Hold will maintain the brake
pressure to hold the vehicle
stationary. Press the
accelerator pedal to resume
driving.
GREENLIGHT
OFFApplying EPBDepress the brake pedal and then pull up
the EPB switch.Releasing EPBTurn the engine ON, depress the brake
pedal and push the EPB switch down or
Automatically release EPB. With engine
ON, doors closed, and seat belt fastened
shift from P (Park) to R (Reverse) or D
(Drive). Depress the accelerator pedal.
AUTO HOLDELECTRONIC PARKING BRAKE (EPB)
3. To turn off the Auto Hold
feature, press the brake
pedal and press the AUTO
HOLD switch. The AUTO
HOLD indicator light will turn
off.
Quick Reference Guide I 39
38 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
ESC automatically selects the ON
position when the engine is started.To turn off Traction ControlPress the ESC OFF button once.To turn off Traction & Stability
ControlPress the ESC OFF button for more
than 3 seconds.The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.
LANE KEEPING ASSIST SYSTEM (LKAS)
The Lane Keeping Assist System
detects lane markers on the road,
and assist the driver's steering to
help keep the vehicle between lanes.
• To turn on the LKAS, press the
LKAS switch.
• To turn off the LKAS, press the
switch again.
LKAS opearates only while the
vehicle speed is over 40mph and
below 110mph.
For more detailed information, please
refer to Section 5 of the Owner's
Manual.
ELECTRONIC STABILITY CONTROL (ESC)
2
The Blind Spot Detection system uses
radar sensors to monitor and warn the
driver of an approaching vehicle in the
driver's blind spot area.1 Blind Spot Detection (BSD)2 Lane Change Assist (LCA)3 Rear Cross Traffic Alert (RCTA)
• To turn on the BSD, press the BSD
button (indicator illuminated).
• BSD and LCA operate in D (Drive)
over appx. 20mph.
• RCTA operates in R (Reverse)
under appx. 6mph.
• To turn off the BSD, press the BSD
button again.
When the vehicle is in R (Reverse), the system provides an alert if a
vehicle or pedestrian is approaching from the sides.Rear Cross Traffic Alert
3
1AUTOMATIC EMERGENCY BRAKING (AEB)The Automatic Emergency Braking (AEB) system is designed to help
detect and monitor the vehicle ahead or detect a pedestrian in the
roadway through radar signals and camera recognition to warn the
driver that a collision is imminent, and if necessary, apply emergency
braking.To activate or deactivate the AEB system, select or deselect:
“User Settings
Driving Assist
Automatic Emergency Braking”
The AEB deactivates when system setting is deselected. A warning
light
will illuminate on the LCD display when the AEB system is
deactivated. Please refer to the Owner’s Manual for more information.
Caution: Do not try to test the AEB system.
BLIND SPOT DETECTION SYSTEM (BSD)
