2018 Hyundai Elantra GT maintenance

[x] Cancel search: maintenance

Page 431 of 478

Hyundai Elantra GT 2018  Owners Manual 7-70
Maintenance
Side marker
1. Open the hood.
2. Disconnect the negative batterycable.
3. Remove the socket from the assembly by turning the socket
counterclockwise until the tabs on
the socket align

Page 432 of 478

Hyundai Elantra GT 2018  Owners Manual 7-71
7
Maintenance
Rear Combination Light Bulb
Replacement
Type A
(1) Stop/Tail lamp
(2) Turn signal lamp
(3) Tail lamp
(4) Back-up lamp
(5) Side marker
Stop/Tail lamp and turn signal lamp
1. Open the

Page 433 of 478

Hyundai Elantra GT 2018  Owners Manual 7-72
Maintenance
5. Remove the socket from the assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Remove the bulb from the socket by

Page 434 of 478

Hyundai Elantra GT 2018  Owners Manual 7-73
7
Maintenance
3. Remove the socket from theassembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4. Pull the bulb out of the socket.
5

Page 435 of 478

Hyundai Elantra GT 2018  Owners Manual 7-74
Maintenance
4. Remove the rear combination lamp assembly from the body of
the vehicle. 5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket a

Page 436 of 478

Hyundai Elantra GT 2018  Owners Manual 7-75
7
Maintenance
Backup lamp
1. Open the liftgate.
2. Remove the service cover using aflat-blade screwdriver. 3. Remove the bulb by pulling it
straight out.
4. Insert a new bulb by inserting it into

Page 437 of 478

Hyundai Elantra GT 2018  Owners Manual 7-76
Maintenance
7. Remove the high mounted stop lamp after removing the mounting
nuts.
8. Install a new lamp
9. Reinstall the rear spoiler and the liftgate upper trim in the reverse
order.
License Pl

Page 438 of 478

Hyundai Elantra GT 2018  Owners Manual 7-77
7
Maintenance
1. Using a flat-blade screwdriver,gently pry the lens from the interi-
or lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align