2018 Hyundai Creta automatic

[x] Cancel search: automatic

Page 312 of 472

Hyundai Creta 2018  Owners Manual ESC operation  
ESC ON condition
When the ignition switch is in the ON
position, the ESC and the ESC OFF
indicator lights illuminate for approxi-
mately three seconds and goes off,
then the ESC is tur

Page 313 of 472

Hyundai Creta 2018  Owners Manual ESC OFF condition
This vehicle has 2 kinds of
ESC off states.
If the engine stops when
ESC is off, ESC remains off.
Upon restarting the engine,
the ESC will automatically
turn on again.To cancel ESC o

Page 316 of 472

Hyundai Creta 2018  Owners Manual VSM OFF condition
To cancel VSM operation, press the
ESC OFF button. ESC OFF indicator
light ( ) will illuminate.
To turn on VSM, press the ESC OFF
button again. The ESC OFF indicator
light will go ou

Page 317 of 472

Hyundai Creta 2018  Owners Manual Good braking practices Wet brakes can be dangerous! The
brakes may get wet if the vehicle is
driven through standing water or if it
is washed. Your vehicle will not stop
as quickly if the brakes are w

Page 321 of 472

Hyundai Creta 2018  Owners Manual Cruise Control will be canceled
when:
 Depressing the brake pedal.
 Depressing the clutch pedal. (for
manual transaxle vehicle)
 Pressing the CANCEL buttonlocat-
ed on the steering wheel.
 Moving the

Page 323 of 472

Hyundai Creta 2018  Owners Manual 5-48
Driving your vehicle
S SP
PE
EC
CI
IA
AL
L 
 D
DR
RI
IV
VI
IN
NG
G 
 C
CO
ON
ND
DI
IT
TI
IO
ON
NS
S
Hazardous driving conditions
When hazardous driving conditions
are encountered such as water,
s

Page 330 of 472

Hyundai Creta 2018  Owners Manual To keep locks from freezing
To keep the locks from freezing,
squirt an approved de-icer fluid or
glycerine into the key opening. If a
lock is covered with ice, squirt it with
an approved de-icing flui

Page 334 of 472

Hyundai Creta 2018  Owners Manual If the engine stalls while driving
 Reduce your speed gradually,
keeping a straight line. Move cau-
tiously off the road to a safe place.
 Turn on your hazard warning flash-
er.
 Try to start the engi