2018 HONDA ACCORD SEDAN lock

105
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Safety Support
Indicator
(Amber)
•Comes on when RDM and/or
CMBSTM shuts itself off.
• Indicator may come on temporarily when
passing through an encl osed space, such
as tunnel.
• The area around the radar sensor is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
• Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor.
2 Collision Mitigation Braking
SystemTM (CMBSTM) P. 493
• Stays on - The temperature inside the
camera is too high.
Use the climate contro l system to cool
down the camera.
The system acti vates when the
temperature inside the camera cools
down.
2 Front Sensor Camera P. 536
18 ACCORD HYBRID-31TWA6000.book 105 ページ ２０１８年１月３０日　火曜日　午後７時３８分

106
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Safety Support
Indicator
(Amber)
•Comes on when RDM and/or
CMBSTM shuts itself off.
•Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
• Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 536
•Comes on when mud, snow, or ice
has accumulated in the vicinity of
the BSI sensor.
•Comes on while driving - Something
may be interfering with the BSI sensor.
Check the vicinity of the BSI sensor and
remove any obstacles.
2 Blind spot information (BSI) System*
P. 486
Models with BSI
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 106 ページ ２０１８年１月３０日　火曜日　午後７時３８分

113
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
•Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 544
2 Parking Brake P. 539
•Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.• Press the electric parking brake switch with the brake
pedal depressed.
2 Parking Brake P. 539
•Appears after you set the power mode to
ACCESSORY or ON.
• Appears after you unlock and open the driver’s
door.
2 Turning on the Power P. 458Canadian models
18 ACCORD HYBRID-31TWA6000.book 113 ページ ２０１８年１月３０日　火曜日　午後７時３８分

121
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
•Appears if there is a problem with the Auto high-
beam.•Manually operate the headlight switch.
• If you are driving with th e high-beam headlights when
this happens, the headlights are changed to low beams.
• Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)•When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2 Radar Sensor P. 538
•Appears if the temperature inside the front sensor
camera is too high and the ACC with LSF, LKAS,
traffic sign recognition system and auto high beam
cannot be activated.•Use the climate control system to cool down the
camera.
• Disappears - The camera has been cooled down and
the systems are activated normally.
2 Front Sensor Camera P. 536
•Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)•When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2 Front Sensor Camera P. 536
18 ACCORD HYBRID-31TWA6000.book 121 ページ ２０１８年１月３０日　火曜日　午後７時３８分

130
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when you unlock and open the driver’s
door while the power system is on by smart entry
remote.
2 Remote Engine Start with Vehicle Feedback P. 460
•Appears if there is a pr oblem with the acoustic
vehicle alerting system.• Have your vehicle checked by a dealer immediately.
• Appears when the High Vo ltage battery is running
extremely low.• Contact a dealer immediately.
• Appears if the engine needs to be started when you
press the EV button.
—
18 ACCORD HYBRID-31TWA6000.book 130 ページ ２０１８年１月３０日　火曜日　午後７時３８分

163
Controls
This chapter explains how to operate the various controls necessary for driving.
Clock.................................................. 164
Locking and Unlocking the Doors Key Type and Functions ................... 166
Low Smart Entry Remote Signal Strength .... 167Locking/Unlocking the Doors from the Outside .......................................... 168
Locking/Unlocking the Doors from the Inside ............................................. 174
Childproof Door Locks ..................... 176
Auto Door Locking/Unlocking .......... 177
Opening and Closing the Trunk ....... 178
Security System
Immobilizer System .......................... 181 Security System Alarm...................... 181
Opening and Closing the Windows.... 184Opening and Closing the Moonroof*..... 187Operating the Switches Around the
Steering Wheel POWER Button................................. 188
Turn Signals ..................................... 191
Light Switches.................................. 191
Fog Lights
*...................................... 193
Daytime Running Lights ................... 194
Auto High-Beam .............................. 195
Wipers and Washers ........................ 198
Rear Defogger/Heated Door Mirror Button .. 200
Heated Windshield Button* ............. 200
Brightness Control ........................... 201
Driving Position Memory System
*.... 203
Adjusting the Steering Wheel .......... 205
Adjusting the Mirrors Interior Rearview Mirror ................... 206
Power Door Mirrors ......................... 207
Adjusting the Seats .......................... 208
Interior Lights/Interior Convenience
Items ................................................ 217
Climate Control System Using Automatic Climate Control .... 232
Automatic Climate Control Sensors......235
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 163 ページ ２０１８年１月３０日　火曜日　午後７時３８分

164
Controls
Clock
Adjusting the Clock
You can adjust the time manually in the audio/information screen, with the power
mode in ON.
1.Press and hold the MENU/CLOCK button.
u Adjust Clock is selected.
2. Rotate to change hour, then press .
3. Rotate to change minute, then press
.
4. To enter the selection, rotate and select
Set , then press .
■Adjusting the Time
1Clock
The clock is automatically updated through the
navigation system, so the ti me does not need to be
adjusted.
These indications are used to show how to operate
the selector knob.
Rotate to select.
Press to enter.
You can customize the clock display to show the 12
hour clock or 24 hour clock. 2 Customized Features P. 367
You can turn the clock display on and off. 2 Customized Features P. 367
Models with navigation system
Models with color audioMENU/CLOCK Button
Selector KnobModels with color audio
18 ACCORD HYBRID-31TWA6000.book 164 ページ ２０１８年１月３０日　火曜日　午後７時３８分

165
uuClock uAdjusting the Clock
Controls
1. Push , then select Settings.
2. Select System.
3. Select Day & Time.
4. Select Set Date & Time .
5. Select Automatic Date & Time , then
select OFF.
To adjust time:
6. Select Set Time.
7. Selecting / .
8. Select Save to set the time.
To adjust date:
6. Select Set Date.
7. Selecting / .
8. Select Save to set the date.
1Clock
You can also adjust the clock by touching the clock
displayed on the upper right corner of the display or
the Clock icon on the home screen.
1. Touch the clock on the display.
The clock screen of the select face-type appears.
2. Select Settings .
3. Select Date & Time .
4. Select Set Date & Time .
5. Select Automatic Date & Time , then select OFF.
6. Select Set Date or Set Time.
7. Adjusting the dates, hours and minutes by selecting / .
8. Select Save to set the time.
You can customize the clock display to show the 12
hour clock or 24 hour clock. 2 Customized Features P. 367, 378
You can customize th e date display to MM/DD/
YYYY , DD/MM/YYYY or YYYY/MM/DD .
2 Customized Features P. 367
Models with Display Audio
34
Models with Display Audio
34
34
18 ACCORD HYBRID-31TWA6000.book 165 ページ ２０１８年１月３０日　火曜日　午後７時３８分