Page 29 of 127
Continued27
uuPersonal Information uSaved Trips
System SetupH (Map) uu myTrips
1.Select a saved trip you want to
edit.
2. Select Trip Settings .
3. Select an option.
The following options are available:
• Trip Name : Enters a new name for the saved trip.
• Optimize Order : Automatically orders the wayp oints in the destination list.
• Calculation Mode : Changes the route preferences (calculating method).
• Avoidances : Changes preferences for route options to avoid.
■Editing a Saved Trip1
Editing a Saved Trip
The route preference is just for the trip. If you want to
change the route preference for routing, change the
navigation settings. 2 Calculation Mode P. 41
2 Avoidances P. 42
Page 34 of 127
32
System Setup
Guidance Volume Settings
H (Home) uSettings uSystem uSystem Volumes uSystem Volumes
Adjust the navigation guidance volume. 1.Select or of Navigation
On Guidance .
2. Select Save.1Guidance Volume Settings
You can also adjust the volume by sliding or swiping
on the volume bar.
During the voice guidance, you can adjust the
guidance volume using the volume knob.
Page 41 of 127
39
uuMap and Vehicle uMap Updates
System Setup
Map Updates
H (Map) uu Settings uMap and Vehicle uMap Updates
Start the map update process. Follow the on-screen instructions.1Map Updates
For information on navigation updates for your
vehicle, please visit:
•U.S.: hondanavi.navigation. com
•Canada: www.honda.ca/owners/honda-servi ces/
navigation 2 Obtaining a Navigation Update P. 108
Page 42 of 127
40
System Setup
Navigation
H (Map) uu Settings uNavigation
Changes the navigation settings.
The following options are available:
• Calculation Mode : Sets route preference.
2Calculation Mode P. 41
•Avoidances : Sets road features to avoid on a route.
2Avoidances P. 42
•Custom Avoidances : Allows you to avoid sp ecific roads or areas.
2Custom Avoidances P. 43
•Satellite Status : Displays the satellite' status.
2Satellite Status P. 47
•GPS Simulator : Stops the system from receiving a GPS signal.
1Navigation
GPS Simulator is set to off as factory default.
You can access the naviga tion settings from any
screen includes the options menu icon.
Select to open the options menu, and then select
Navigation Settings .
Page 43 of 127
41
uuNavigation uCalculation Mode
System Setup
Calculation Mode
H (Map) uu Settings uNavigation uCalculation Mode
Sets the route preference. 1.Select an option.
2. Select Save.
The following options are available:
• Faster Time (factory default): Calculates routes that are faster to drive but can be
longer in distance.
• Shorter Distance : Calculates routes that are shorter in distance but can take
more time to drive.
• Less Fuel : Calculates routes that could us e less fuel than other routes.
Page 44 of 127
42
uuNavigation uAvoidances
System Setup
Avoidances
H (Map) uu Settings uNavigation uAvoidances
Set preferences for route options to avoid. 1.Select an option(s).
2. Select Save.
The following options are available:
• U-Turns : Avoids u-turns.
• Highways : Avoids highways.
• Tolls and Fees : Avoids toll roads.
• Ferries : Avoids ferries.
• Carpool Lanes : Avoids car share lanes.
• Unpaved Roads : Avoids unpaved roads.
• Custom Avoidances : Avoids specific areas and roads.
2Custom Avoidances P. 43
1Avoidances
Highways , Tolls and Fees , and Ferries are set to off
as factory default.
Page 45 of 127
43
uuNavigation uCustom Avoidances
Continued
System Setup
Custom Avoidances
H (Map) uu Settings uNavigation uCustom Avoidances
Allows you to avoid specific areas and sect ions of road. You can enable and disable
custom avoidances as needed.
1.Select Add Avoidance .
2. Select an option.
The following options are available:
• Avoid Area : Sets an area to avoid.
2Adding an Avoid Area P. 44
•Avoid Road : Sets a road to avoid.
2Adding an Avoid Road P. 45
Page 46 of 127
44
uuNavigation uCustom Avoidances
System SetupH (Map) uu Settings uNavigation uCustom Avoidances uAdd
Avoidance uAvoid Area
1.Select the upper-right (left) corner
of the area to avoid. Select Next.
u The icon is displayed on the
map.
2. Select the lower-left (right) corner
of the area to avoid. Select Next.
3. Select Done.
■Adding an Avoid Area