2018 FORD F450 SUPER DUTY wheel

[x] Cancel search: wheel

Page 578 of 656

FORD F450 SUPER DUTY 2018  Owners Manual •
Cruise control.
• Tool or Cargo boxes*.
• Vehicle security system.
• Wheel locks.
• Wheel well liners.
*The accessory manufacturer designs,
develops and therefore warrants Ford
Licensed Ac

Page 588 of 656

FORD F450 SUPER DUTY 2018  Owners Manual NORMAL SCHEDULED MAINTENANCE
Gasoline Engine
Normal Maintenance Intervals
7,500 mi (12,000 km) or Six Months Whichever Comes First
Change engine oil and filter.
Rotate tires 1
, inspect tire wear and

Page 589 of 656

FORD F450 SUPER DUTY 2018  Owners Manual Other Maintenance Items
Change engine coolant. 1
Every 105,000 mi
(168,000 km) Inspect accessory drive belt or belts. 2
Change automatic transmission fluid and filter on 6-speed
transmission. Consult

Page 591 of 656

FORD F450 SUPER DUTY 2018  Owners Manual At Every Oil Change Interval as Indicated by the Information Display
1
Inspect the front axle and U-joints. Lubricate any grease fittings. Four-wheel drive
vehicles.
Inspect the steering linkage, ball

Page 592 of 656

FORD F450 SUPER DUTY 2018  Owners Manual Other maintenance items
1
Change axle(s) fluid. See exceptions.
Change transfer case fluid, if equipped.
1  You can perform these maintenance items within 3,000 mi (4,800 km) of the last oil
change. D

Page 593 of 656

FORD F450 SUPER DUTY 2018  Owners Manual Towing a Trailer or Using a Car-top Carrier
Rotate tires 1
, inspect tires for wear and measure tread
depth.
Change engine oil and filter.
Every 5,000 mi (8,000 km)
or six months. Inspect and lubricat

Page 594 of 656

FORD F450 SUPER DUTY 2018  Owners Manual Extensive Idling or Low-speed Driving for Long Distances, as in Heavy Commercial Use
(Such as Delivery, Taxi, Patrol Car or Livery)
Replace front wheel bearing grease and grease seals if
non-sealed be

Page 595 of 656

FORD F450 SUPER DUTY 2018  Owners Manual Off-road operation
Rotate tires 1
, inspect tires for wear and measure tread
depth.
Replace front wheel bearing grease and grease seals if
non-sealed bearings are used.
Every 30,000 mi
(48,000 km)
1 V