2018 FORD E SERIES four wheel drive

[x] Cancel search: four wheel drive

Page 89 of 323

FORD E SERIES 2018  Owners Manual AUTOMATIC TRANSMISSION
WARNING
Always fully apply the parking brake.Make sure you shift into park (P) forvehicles with an automatictransmission. Switch the ignition off andremove the key whenever you

Page 116 of 323

FORD E SERIES 2018  Owners Manual Exceeding these limits may allow water toenter vehicle components:
•Causing internal damage to thecomponents.
•Affecting driveability, emissions andreliability.
Replace the rear axle lubricant any

Page 124 of 323

FORD E SERIES 2018  Owners Manual 2. Remove the jumper cable on thenegative (-) terminal of the boostervehicle battery.
3. Remove the jumper cable from thepositive (+) terminal of the boostervehicle battery.
4. Remove the jumper cable

Page 174 of 323

FORD E SERIES 2018  Owners Manual G.H: Indicates the tire's speedrating. The speed rating denotesthe speed at which a tire isdesigned to be driven for extendedperiods of time under a standardcondition of load and inflationpressure

Page 184 of 323

FORD E SERIES 2018  Owners Manual describes the fundamentalcharacteristics of the tire and alsoprovides a U.S. DOT TireIdentification Number for safetystandard certification and in caseof a recall.
This begins with the letters DOTand

Page 186 of 323

FORD E SERIES 2018  Owners Manual Driving habits have a great dealto do with your tire mileage andsafety.
*Observe posted speed limits
*Avoid fast starts, stops and turns
*Avoid potholes and objects onthe road
*Do not run over curbs o

Page 187 of 323

FORD E SERIES 2018  Owners Manual Note:If your tires show unevenwear ask an authorized dealer tocheck for and correct any wheelmisalignment, tire imbalance ormechanical problem involvedbefore tire rotation.
Note:Your vehicle may beequ

Page 280 of 323

FORD E SERIES 2018  Owners Manual Exceptions
There are several exceptions to the NormalSchedule:
Axle(s) and transfer case (Four-wheeldrive vehicles) fluid changes or levelchecks are not required unless a leak issuspected or the assem