2018 FIAT FULLBACK service

[x] Cancel search: service

Page 187 of 316

FIAT FULLBACK 2018  Owner handbook (in English) 151)
Jacking up a 4-wheel drive vehicles
243)
Clutch operation
Quick or slight clutch engagement
made while the engine is running at
high speed will cause damage to the
clutch and transmission because

Page 198 of 316

FIAT FULLBACK 2018  Owner handbook (in English) By using the CANCEL switch, the
service brake and the SET - switch
Press the CANCEL switch (D) to
deactivate the Speed Limiter. Control
state “LIMIT” is disappeared and
change control state “LIM

Page 199 of 316

FIAT FULLBACK 2018  Owner handbook (in English) 254)
A driver can change the set speed
during this emergency use.
To deactivate
Use whichever following ways to
deactivate.
Press CANCEL switch
Press the Speed Limiter ON/OFF
switch
NOTE If the Speed

Page 208 of 316

FIAT FULLBACK 2018  Owner handbook (in English) ERA GLONASS
(where provided)
ERA-GLONASS is a system designed
to reduce the severity of accidents. The
location and vehicle information is
transmitted from the system to the
emergency call centre in c

Page 209 of 316

FIAT FULLBACK 2018  Owner handbook (in English) Indicator list
Situation Red lamp Green lamp Cause Solution
When setting
the ignition
switch or the
operation
mode to
“ON”Illuminates (for
approx.
10 seconds)Illuminates (for
approx.
10 seconds)Th

Page 211 of 316

FIAT FULLBACK 2018  Owner handbook (in English) WARNING
263)In the country or area where is no
available emergency call centre of the
ERA-GLONASS, or where the radio wave
of emergency call cannot be transmitted or
received normally, the system does

Page 228 of 316

FIAT FULLBACK 2018  Owner handbook (in English) TOWING
If your vehicle needs to be towed
If towing is necessary, we recommend
you to have it done by a Fiat Dealership
or a commercial tow truck service. In
the following cases, transport the
vehicle

Page 239 of 316

FIAT FULLBACK 2018  Owner handbook (in English) Fuse replacement
344) 345) 346) 347) 348) 349)
182)
1. Before replacing a fuse, always turn
off the electrical circuit concerned and
place the ignition switch in the “LOCK”
position or put the ope
Page:   < prev 1-8 9-16 17-24 25-32 next >