2018 DODGE DURANGO SRT lock

•Misapplication, improper maintenance, racing, underinflation, overin-
flation or other abuse;
•Operation without a properly functioning low pressure warning
system, for Comp T/A® ZR SSS tires;
•Uneven or rapid wear which is caused by mechanical irregularity in
the vehicle such as wheel misalignment, (a measured tread difference
of 2/32 nds of an inch (1.6 mm) or more across the tread on the same
tire);
•Accident, fire, chemical corrosion, tire alteration or vandalism;
•Flat spotting caused by improper storage or brake lock;
•The adding of liquid, solid or gaseous materials other than air, nitrogen
or carbon dioxide (for example, waterbase sealers or balancing
substances);
•Ozone or weather checking.
HOW REPLACEMENT CHARGES ARE CALCULATED
Passenger And Light Truck Tires Workmanship/Materials
A tire which becomes unserviceable due to a condition covered by this
workmanship and materials limited warranty will be replaced with a
comparable new BFGoodrich brand tire, free of charge, when 2/32 nds of
an inch (1.6 mm) or less of the original tread is worn, (or 25% or less,
whichever is more beneficial to you) and within 12 months of the date of
purchase. The cost of mounting and balancing the tire is included.Yo u
pay the cost of any other service charges and applicable taxes.
When more than 2/32 nds of an inch (1.6 mm) of the original tread has
been worn (or more than 25%, whichever is more beneficial to you) or
after 12 months from the date of purchase, you must pay the cost of a
comparable new BFGoodrich brand passenger or light truck replacement
tire on a pro rated basis. The retailer shall determine the charge by
multiplying the percentage of the original usable tread worn by the
current selling price at the adjustment location or the price on the current
BFGoodrich brand Base Price List, whichever is lower. This list is based
on a predetermined price intended to fairly represent the actual selling
price of the tire.
You pay the cost of mounting, balancing, and or any other service
charges and applicable taxes.
BFGOODRICH TIRES
28

Tire Pressure Monitoring System Alert
Refer to your vehicle Owner ’s Manual for more information on what to
do if the tire pressure warning system activates.
THE CONVENIENCE (TEMPORARY) SPARE
The Convenience (Temporary) Spare is designed, built and tested to the
high engineering standards set by North America’s leading car manufac-
turers and to Goodyear ’s own high standards of quality control. It is
designed to take up a minimum of storage space and, at the same time,
fulfill the function of a spare tire when needed. The spare is kept in its
storage space, fully inflated at 60 psi. To be sure it is always ready for use,
the air pressure should be checked on a regular basis.
The Convenience (Temporary) Spare can be used in combination with the
original tires on your vehicle. You can expect a tire tread life of up to 3,000
miles (4,800 kilometers), depending on road conditions and your driving
habits. To conserve tire tread life, return the spare to the storage area as
soon as it is convenient to have the standard tire repaired or replaced.
The Convenience (Temporary) Spare weighs less than a standard tire so
it’s easier to handle. It also helps reduce the total car weight, which
contributes to fuel economy. The wheels used with the Convenience
(Temporary) Spare are specifically designed for use with high pressure
spares and should never be used with any other type tire.
DON’T ATTEMPT TO MOUNT YOUR OWN TIRES
Serious injury or death may result from explosion of tire/rim assembly
due to improper mounting procedures. Follow tire manufacturer ’s
instructions and match tire diameter to rim diameter. Mount light truck
radials on rims approved for radial service. Do not apply bead sealer.
This can inhibit bead seating. Lubricate beads and tire rim (including
tube or flap) contact surfaces. Lock assembly on mounting machine or
place in safety cage. STAND BACK and never exceed 40 psi to seat beads.
Never use a volatile substance or a rubber “donut” (also known as a bead
expander or “O-Ring”) to aid bead seating. Only specially trained
persons should mount tires.
GOODYEAR DUNLOP TIRES
131

Temporary Spares
MICHELIN® temporary spare tires are covered by this warranty for
6 years from the date of purchase or until the first 2/32 nds of an inch
(1.6 mm) of the original tread is worn off. Date of purchase is docu-
mented by new vehicle registration or tire sales invoice. If no proof of
purchase is available, coverage will be based on date of manufacture. At
that time, all warranties, express or implied, expire.
WHAT IS NOT COVERED
Tires which become unserviceable due to:
•Road hazard injury (e.g., a cut, snag, bruise, impact damage or
puncture);
•Incorrect mounting of the tire, tire/wheel imbalance or improper
repair;
•Misapplication, improper maintenance, racing, underinflation, overin-
flation or other abuse;
•Uneven or rapid wear which is caused by mechanical irregularity in
the vehicle such as wheel misalignment, (a measured tread difference
of 2/32 nds of an inch (1.6 mm) or more across the tread on the same
tire);
•Accident, fire, chemical corrosion, tire alteration, or vandalism;
•Use in commercial applications for tread wear; by this warranty for
6 years;
•Flat spotting caused by improper storage or brake lock;
•The addition of liquid, solid or gaseous materials other than air,
nitrogen or carbon dioxide (for example, waterbase sealers or balanc-
ing substances);
•Cosmetic ozone or weather cracking;
•Use of MICHELIN Self-Supporting Zero Pressure (AP) tires without a
properly operating low air pressure warning system.
MICHELIN
162

•Any tires worn beyond the wear indicators. (Less than 2/32remain-
ing tread depth). remaining tread depth).
•Flat spotting caused by improper storage or brake lock.
•Accident, fire, chemical corrosion, tire alteration or vandalism.
•Tire which D.O.T. identification number and/or brand name removed
intentionally.
•Loss of time or use, inconvenience or any incidental or consequential
damage.
•Original equipment tires on new vehicle. (See separate warranty, if
applicable, in your vehicle’s glove box.)
•Tires purchased as used.
•Tires used on Recreational Vehicles (For camping & Motor homes, etc.)
or in commercial service.
OTHER LIMITATIONS INCLUDE BUT ARE NOT LIMITED TO THE
FOLLOWING:
•Failure to rotate tires as recommended voids the tread wear warranty.
•If tires are different size on front and rear of vehicle, and therefore can’t
be rotated, the mileage warranty for the rear tires will be half of the
stated mileage warranty.
•Winter tires must be used only in winter months, which are deter-
mined to be September 1st through April 30th of the following year.
Documentation is required showing date of installation and removal to
maintain tread wear warranty.
ROAD HAZARD REPLACEMENT PROGRAM
Most patterns sold by NEXEN TIRE are covered by a road hazard
warranty that protects the consumer against non-repairable damage
caused by puncture, snag, cut, bruise or impact break. Typical road
hazards are nails, glass, potholes and other debris. Covered tires will be
eligible for a free replacement for the first 3/32of original tread depth,
or for a period of two years from the date of purchase; whichever comes
first. If the DOT # on the tire is greater than 2 years from the adjustment
date, an invoice showing date of purchase is necessary. The cost of
mounting, balancing and any other service charges including applicable
taxes are required to be paid by the consumer.
NEXEN TIRE
189

their use and may vary due to driving habits, service practices,
differences in road characteristics, and climate.
•Traction - The traction grades from highest to lowest are AA, A, B, and
C, and they represent the tire’s ability to stop on wet pavement as
measured under controlled conditions on specified government test
surfaces of asphalt and concrete.
mNOTICE!
The traction grade assigned to tires is based on locked braking (straight
ahead) traction tests and does not include cornering (turning) traction.
•Temperature - The temperature grades are A (the highest), B, and C,
representing the tire’s resistance to the generation of heat and its ability
to dissipate heat when tested under controlled conditions on a
specified indoor laboratory test wheel. Sustained high temperatures
can cause the materials of the tire to degenerate and reduce tire life,
and excessive temperature can lead to sudden tire failure. The grade C
corresponds to a level of performance that all passenger car tires must
meet under the Federal Motor Vehicle Safety Standard No. 139. Grades
B and A represent higher levels of performance on the laboratory test
wheel than the minimum required by law.
WARNING!
The temperature grade is established for a tire that is properly
inflated and not overloaded. Excessive speed, underinflation, or
excessive loading either separately or in combination can cause heat
buildup and possible tire failure. This can cause an accident, which
could lead to serious personal injury or death.
•DOT Quality Grades - All passenger car tires must conform to federal
requirements in addition to these grades.
TOYO TIRES – LIMITED WARRANTY
257

•Treadwear - The treadwear grade is a comparative rating based on the
wear rate of the tire tested under controlled conditions on a specified
government test track. For example, a tire graded 200 would wear
twice as long on the government course as a tire graded 100. It is
wrong to link treadwear grades with your projected tire mileage. The
relative performance of the tires depends upon the actual conditions of
their use and may vary due to driving habits, service practices,
differences in road characteristics, and climate.
•Traction - The traction grades from highest to lowest are AA, A, B, and
C, and they represent the tire’s ability to stop on wet pavement as
measured under controlled conditions on specified government test
surfaces of asphalt and concrete.
mNOTICE!
The traction grade assigned to tires is based on locked braking (straight
ahead) traction tests and does not include cornering (turning) traction.
•Temperature - The temperature grades are A (the highest), B, and C,
representing the tire’s resistance to the generation of heat and its ability
to dissipate heat when tested under controlled conditions on a
specified indoor laboratory test wheel. Sustained high temperatures
can cause the materials of the tire to degenerate and reduce tire life,
and excessive temperature can lead to sudden tire failure. The grade C
corresponds to a level of performance that all passenger car tires must
meet under the Federal Motor Vehicle Safety Standard No. 139. Grades
B and A represent higher levels of performance on the laboratory test
wheel than the minimum required by law.
WARNING!
The temperature grade is established for a tire that is properly
inflated and not overloaded. Excessive speed, underinflation, or
excessive loading either separately or in combination can cause heat
buildup and possible tire failure. This can cause an accident, which
could lead to serious personal injury or death.
•DOT Quality Grades - All passenger car tires must conform to federal
requirements in addition to these grades.
NITTO TIRE
311