205
Changing a fuse
Access to the tools
The extraction tweezers are attached to the
back of the fusebox cover of the dashboard or
the glove box.
Dashboard
F Unclip the cover by pulling at the top left, then right.
F
D
isengage the cover completely and turn it
ove r.
F
R
emove the carrier on which the tweezers
are fitted.
Glove box
F Open the glove box lid.
Changing a fuse
F identify the faulty fuse using the existing allocation tables and diagrams given in the
following pages.
To replace a fuse, you must:
F
u
se the special tweezers to extract the fuse
from its housing and check the condition of
its filament,
F
a
lways replace the defective fuse with a
fuse of the same rating (same colour); using
a different rating could cause a malfunction
(risk of fire).
If the fault recurs after replacing a fuse, have
the electrical system checked in the dealer
network or by a qualified workshop.
Replacement with a fuse not shown in
the allocation tables below may cause
a serious malfunction of your vehicle.
Contact the dealer network or a qualified
workshop.
F
U
nclip the fusebox cover by pulling at the
top right.
F
D
isengage the cover completely and turn it
ove r.
F
R
emove the carrier on which the tweezers
are fitted.
Before changing a fuse:
F
t
he cause of the failure must be identified
and rectified,
F
a
ll electrical loads must be switched off,
F
s
top the vehicle and switch off the ignition,
08
In the event of a breakdown
