Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
Infotainment System 119
This input jack is not an audio
output; do not plug headphones into
the auxiliary input jack.
Drivers are encouraged to set up
any auxiliary device while the
vehicle is in P (Park). See
Defensive Driving0134 for more
information on driver distraction.
To use a portable audio player,
connect a 3.5 mm (1/8 in) cable to
the auxiliary input jack.
For optimal sound quality, increase
the portable audio device's volume
to the loudest level.
It is always best to power the
portable audio device through its
own battery while playing.
Bluetooth Audio
A compatible Bluetooth audio
device that is capable of playing
audio files can be connected to the
infotainment system so that the
audio files on the device play
through the vehicle’ s speakers. Connecting Bluetooth Audio
To connect a Bluetooth audio device
to the vehicle, follow the procedure
below:
1. Press ENTER/SETTING.
2. Select “Bluetooth”.
3. Select “Add Phone or Device”.
This same display can be
accessed to remove, replace or
select a different Bluetooth
device.
4. The system acknowledges the command and asks you to
initiate connecting from the
phone handset. The connecting
procedure of the cell phone
varies according to each cell
phone model. For additional
information, refer to the cell
phone Owner ’s Manual. Audio Main Operation
To switch to the Bluetooth audio
mode, press MEDIA repeatedly until
the Bluetooth audio mode is
displayed.
The controls for the Bluetooth audio
are showing on the display. Use the
Preset 3 control for play and the
Preset 4 control for pause.
Steering Wheel Controls
See
Steering Wheel Controls 082.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
120 Infotainment System
Phone
Bluetooth
If equipped with Bluetooth capability,
the system can interact with many
cell phones, allowing:
.Making and receiving calls in a
hands-free mode.
. Sharing the cell phone’s address
book or contact list with the
vehicle.
To minimize driver distraction,
before driving, and with the vehicle
parked:
. Become familiar with the
features of the cell phone.
Organize the phone book and
contact lists clearly and delete
duplicate or rarely used entries.
If possible, program speed dial
or other shortcuts.
. Review the controls and
operation of the infotainment
system. .
When the vehicle is in motion,
some commands may not be
available so full attention may be
given to operating the vehicle.
. Pair cell phone(s) to the vehicle.
The system may not work with
all cell phones. See “Pairing”in
this section later.
. If the cell phone has voice
dialing capability, learn to use
that feature to access the
address book or contact list.
{Warning
When using a cell phone, it can
be distracting to look too long or
too often at the screen of the
phone or the infotainment system.
Taking your eyes off the road too
long or too often could cause a
crash resulting in injury or death.
Focus your attention on driving.
Bluetooth Controls
Use the buttons on the steering
wheel to operate the in-vehicle
Bluetooth system. See Steering
Wheel Controls 082.
gV:Press to answer incoming
calls and start speech recognition.
V: Press and hold to end a call or
reject a call.
A Bluetooth system can use a
Bluetooth-capable cell phone with a
Hands-Free Profile to make and
receive phone calls. The system
can be used while the ignition is on
or in ACC/ACCESSORY. If the
g V
button on the steering wheel is
pressed before the initialization
completes, the system will
announce “Hands-free phone
system not ready” and will not react
to voice commands. Not all phones
support all functions, and not all
phones work with the in-vehicle
Bluetooth system. See
www.gm.com/bluetooth for more
information on compatible phones.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
Infotainment System 121
Choosing a Language
The available languages are
English, Spanish, and French.
To change the language:1. Press and hold
g Vfor more
than five seconds.
2. The system responds with, “Press the PHONE/SEND
(
gV) control for the
hands-free phone system to
enter the voice adaptation
mode or press the PHONE/
END (
V) control to select a
different language.”
3. Press
V.
4. The system responds with the current language and gives the
option to change to another
language. Do nothing and the
session will end after
five seconds and the current
language will remain.
5. To select a different language, press
gordon the steering
wheel. 6. To select the language, press
g
Vwithin five seconds.
Voice Recognition
The Bluetooth system uses voice
recognition to interpret voice
commands to dial phone numbers
and name tags.
For available commands for the
current menu again, say “Help”and
the system will repeat them.
Noise : Keep interior noise levels to
a minimum. The system may not
recognize voice commands if there
is too much background noise.
When to Speak : A tone sounds
after the system responds indicating
when it is waiting for a voice
command. Wait until the tone and
then speak. Start speaking a
command within five seconds after
the tone sounds.
How to Speak : Speak clearly in a
calm and natural voice without
pausing between words.
Mute : Say to mute the call. Say
mute again to unmute the call.
Audio System
When using the in-vehicle Bluetooth
system, sound comes through the
vehicle's audio system speakers
and overrides the audio system.
Use the audio system volume knob
or press
x− orx+ on the steering
wheel, during a call, to change the
volume level.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
the cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone.
Pairing Information
. A Bluetooth phone with MP3
capability cannot be paired to
the vehicle as a phone and an
MP3 player at the same time.
. Up to five cell phones can be
paired to the Bluetooth system.
. The pairing process is disabled
when the vehicle is moving.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
122 Infotainment System
.Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
. Only one paired cell phone can
be connected to the Bluetooth
system at a time.
. If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To connect to a
different paired phone, see
“Listing All Paired and
Connected Phones” later in this
section.
Pairing a Phone
1. Press
g V.
2. Say “Connect Phone.” The
system acknowledges the
command and announces the
next set of available
commands. 3. Say
“Add Phone.” The system
acknowledges the command
and asks you to initiate
connecting from the phone
handset.
The connecting procedure of
the cell phone varies according
to each cell phone model. See
the cell phone Owner ’s Manual
for details.
When prompted for a Passkey
code, enter “1234”from the
handset.
4. The system asks you to say a name for the phone.
If the name is too long or too
short, the system tells you,
then prompts you for a name
again.
If more than one phone is
connected and the name
sounds too much like a name
already used, the system tells
you, then prompts you for a
name again. Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with
“is connected”
after that phone name:
1. Press
g V.
2. Say “Select Phone.”
Deleting a Paired Phone
The system will list the names
assigned to each phone and then
prompt you for the phone you wish
to delete. Deleting a phone from the
vehicle will also delete the phone
book for that phone:
1. Press
g V.
2. Say “Delete Phone.”
Replace Phone
The system will replace an existing
phone pairing with a new phone.
The system will keep all voice tags
assigned to your phone book.
1. Press
g V.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
Infotainment System 123
2. Say“Replace Phone.”
Bluetooth Off
Use the Bluetooth Off command to
prevent a wireless connection to
your phone.
1. Press
g V.
2. Say “Bluetooth Off.”
Making a Call
Calls can be made using the
following commands:
Call :This command is used to dial
a stored name.
Phone Number : This command
allows a phone number to be dialed
by entering the digits one at a time.
Special Number : This command
allows special characters in a phone
number.
Re-dial : This command is used to
dial the last number used on the cell
phone.
Call Back : This command is used
to call the last incoming phone
number. During a Call
During a call there are several
command options available. Press
g
Von the steering wheel to mute
the receiving voice and enter
commands.
Help : The system announces the
available commands.
Cancel or Quit : The system
announces “Cancel,”ends the
session, and returns to the call.
Send : Use the Send command to
enter numbers, “*”or“#” during a
call. For example, if you were
directed to dial an extension by an
automated system, say “Send one
two three four.”
The system acknowledges the
command and sends the tones
associated with the numbers. The
system then ends the session and
returns to the call. Say “star”for“*”
and say “pound”for“#”. Transfer Call :
Use the Transfer
Call command to transfer the call
from the Bluetooth Hands-Free
Phone System to the cell phone
when privacy is desired.
The system announces, “Transfer
call. Call transferred to privacy
mode.” The system then ends the
session.
To reconnect the call from the cell
phone to the Bluetooth Hands-Free
System, press the
g Vbutton.
Mute : Use this command to mute
your voice so the other party cannot
hear it. Use the mute command
again to unmute your voice.
Using the “Call”Command
1. Press
g V.
2. Say “Call.”
3. Say the name you want to call.
4. The system repeats it back. If there are multiple numbers
associated with the name, the
system asks you to choose the
correct number.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
Infotainment System 125
4. The system will ask you totransfer a phone number stored
in the cell phone’s memory.
5. Enter a phone number by voice command.
6. Say “Transfer Entry.” The
system acknowledges the
command and asks you to start
the transfer from the phone
handset.
7. The system repeats the number and prompts you for
the next command. When you
have finished entering numbers
or transferring an entry, say
“Store.”
8. The system confirms the name, location, and number.
Using the “Delete Entry”
Command
1. Press
g V.
2. Say “Delete Entry.”
3. Speak the name to delete or say “List Names” to choose an
entry. Using the
“List Names” Command
1. Press
g V.
2. Say “List Names.”
3. The system responds with a list of names from the phone book.
To stop the playback of the list
at any time press
V.
With Automatic Download
For phones that support automatic
download of the phone book the
“Phone book” command is used to
manage phone book entries.
The phone book stores up to
1,000 names for each phone
connected to the system.
When a phone is connected to the
system, the phone book is
automatically downloaded to the
vehicle. This feature allows access
to the phone book from the
Bluetooth system and calls contacts
by name. You can record a custom
voice tag for contact names that the
system has difficulty recognizing.
See “Record name” in this section. List Names :
This command will list
all the names and locations in the
phone book.
Record Name : This command will
record custom voice tags for contact
names in the phone book that the
vehicle has difficulty recognizing.
Using the “List Names” Command
1. Press
g V.
2. Say “List Names.”
3. The system responds with a list of names and locations in the
phone book. To stop the
playback of the list at any time
press
V.
Using the “Record Name”
Command
1. Press
g V.
2. Say “Record Name.”
This feature can also be used to
record voice tags to directly dial an
entry with multiple numbers. Up to
40 voice tags can be recorded to
the system.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
128 Infotainment System
3. Browse the menu bypressing
QTUNE/FF-REW
FOLDER
Rup or down. The
system will speak the current
menu option. Depending on the
audio display, it will also show
the current menu option.
4. Press
g Vto select the menu
option.
5. Press
Vto go back to the
previous menu.
6. Press and hold
Vfor
five seconds to exit.
Trademarks and
License Agreements
FCC Information
See Radio Frequency Statement
0 273.
“Made for iPod” and“Made for
iPhone” mean that an electronic
accessory has been designed to
connect specifically to iPod or
iPhone and has been certified by
the developer to meet Apple
performance standards. iPod and iPhone are trademarks of
Apple Computer, Inc., registered in
the U.S. and other countries.
Bluetooth
The Bluetooth word mark and logos
are owned by the Bluetooth SIG,
Inc. and any use of such marks by
General Motors is under license.
Other trademarks and trade names
are those of their respective owners.
Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
Service and Maintenance 247
Engine air filter :Replace at
specified intervals. When driving for
prolonged periods in dusty
conditions, check/replace the filter
more frequently.
Engine coolant* : Replace coolant
at the specified interval. When
adding or replacing coolant, be sure
to use only prediluted ACDelco CE
Long Life Antifreeze Coolant (blue)
or equivalent. See Recommended
Fluids and Lubricants 0257.
Mixing any other type of coolant or
using non-distilled water may
reduce the recommended service
interval of the coolant.
Engine oil and oil filter : Replace
engine oil and oil filter at the
specified intervals. For
recommended oil grade and
viscosity, see Recommended Fluids
and Lubricants 0257.
Engine valve clearance* : Inspect
only if valve noise increases. Adjust
valve clearance if necessary. Evaporative emissions control
vapor lines :
Check vapor lines for
leaks or looseness. Tighten
connections or replace parts as
necessary.
Fuel lines* : Check the fuel hoses,
piping, and connections for leaks,
looseness, or deterioration. Tighten
connections or replace parts as
necessary.
Spark plugs : Replace at specified
intervals. Install new plugs of the
same type as originally equipped.
Chassis and Body Maintenance
Brake lines and cables : Visually
inspect for proper installation.
Check for chafing, cracks,
deterioration, and signs of leaking.
Replace any deteriorated or
damaged parts immediately.
Brake pads, rotors, drums, and
linings : Check for wear,
deterioration, and fluid leaks.
Replace any deteriorated or
damaged parts immediately. Exhaust system :
Visually inspect
the exhaust pipes, muffler, and
hangers for leaks, cracks,
deterioration, and damage. Tighten
connections or replace parts as
necessary.
Steering gear and linkage, axle
and suspension parts, drive shaft
boots : Check for damage,
looseness, and leakage of oil or
grease. Under severe driving
conditions, inspect more frequently.
Tire rotation : Tires should be
rotated every 8 000 km (5,000 mi).
When rotating tires, check for
damage and uneven wear. Replace
if necessary.
Transmission fluid/oil : Visually
inspect for signs of leakage at
specified intervals.
If towing a trailer, using a camper or
car-top carrier, or driving on rough
or muddy roads, replace the CVT
fluid every 96 000 km (60,000 mi) or
request the dealer to inspect the
fluid.