3♦ Optional equipment
REMOTE KEYLESS
ENTRY TRANSMITTER
KEYLESS ACCESS SYSTEM
Lock
Press to lock all doors.
Press and hold for 1 second to fold the power mirrors.
Unlock
Press to unlock the driver’s door only or all doors.
Press and hold for 1 second to unfold the power mirrors.
Press and hold to open all windows.
Remote Start
Press and release the Lock button and then immediately press and hold the to start the engine.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle.
Press and hold for 3 seconds to activate the alarm. Press it again to cancel the alarm.
Trunk Release
Press twice to open the trunk. Press once to stop power trunk operation.♦
Door Key
Press the button on the side of the transmitter to pull the door key out of the transmitter. Use the key to lock/unlock the driver’s door.
Note: To change the Remote Lock and Unlock settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner’s Manual.
The Keyless Access System enables operation of the doors, ignition and trunk without removing the transmitter from your pocket or purse. The transmitter must be within 3 feet of the door being unlocked or the trunk.
KEYLESS UNLOCKING
With the transmitter within range:
Press the lock button on the driver’s door handle to unlock the driver’s door; press it again within 5 seconds to unlock all doors.
Press the lock button on a passenger door handle to unlock all doors.
Press the touch pad above the license plate to open the trunk.
KEYLESS LOCKING
With the ignition off, the transmitter removed from the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately.
If Passive Locking is turned on, all doors will lock automatically after a short delay.
Note: To change the Keyless Locking and Unlocking settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner’s Manual.
17
DRIVER ASSISTANCE SYSTEMS♦
Night Vision – A thermal heat image of the view ahead displays on the instrument cluster when it is dark outside. An amber indi-cator displays when a pedestrian or animal is detected; and a red alert
displays on the HUD and the Safety Alert Seat pulses or beeps sound (if selected) when approaching a pedestrian too quickly.
To view the Night Vision image, use the Driver Information Center controls on the steering wheel to scroll through the
center display zone until the image is shown.
Front and Rear Vision Camera – When the vehicle is in Reverse, a view of the area behind the vehicle displays on the touch screen. After shifting from Reverse to Drive, a view of the area in front of the vehicle displays. Vehicle speed must be below 5 mph.
Press the Camera icon on the infotainment screen to
activate the front cameras when the vehicle is in Drive.
Front and Rear Parking Assist – During low-speed parking maneuvers, the system provides “distance to closest object”
information on the Driver Information Center, the Safety Alert Seat pulses or a beep sounds (if selected). When an object is very close, the Safety Alert Seat pulses 5 times or beeps sound (if selected).
Rear Cross Traffic Alert – When the vehicle is in Reverse, the system warns of traffic coming in either direction by displaying a red alert on the touch screen and pulsing the left or right side of the Safety Alert Seat or sounding beeps (if selected).
To turn Parking Assist, Rear Cross Traffic Alert and Reverse Automatic Braking on or off, press the Parking Assist
button on the left side of the infotainment screen.
Automatic Safety Belt Tightening – The front safety belts auto-matically tighten during emergency braking or steering
maneuvers, and release when driving conditions return to normal.
See Driving and Operating in your Owner’s Manual.
AUTOMATIC PARKING ASSIST♦
SURROUND VISION♦
Automatic Parking Assist steers the vehicle and applies the brakes at idle speed to help park in
parallel and perpendicular spaces.
1. While in Drive, press the Automatic Parking Assist button on the left side of the infotainment screen. A beep sounds and a
parking assist display is shown on the infotainment screen. The system will begin searching for a large enough parking space.
2. To switch between parallel and perpendicular parking, touch the Parking Type screen button on the infotainment screen.
3. Once a space is found, shift the vehicle into Reverse or Drive as directed and follow the instructions on the infotainment screen. The vehicle automatically steers and brakes, moving at idle speed into a detected parking space. The driver must follow the instructions, select gears, and override braking and acceleration as needed. Parking Complete will be displayed and a beep will sound when the parking maneuver is complete.
See Driving and Operating in your Owner’s Manual.
The Surround Vision system displays a bird’s-eye view of the area surrounding the vehicle on the touch screen when the vehicle is in Reverse.
SURROUND VISION RECORDER
Views from the 360° camera views can be recorded to an SD card in the card reader located in the trunk.
To activate or deactivate recording, touch Video Recorder on the infotainment screen, and then touch .
Once activated, the system will record until it has been turned off. The recorded video can be played when the vehicle is in Park.
See Driving and Operating in your Owner’s Manual.♦ Optional equipment
