Wheels
Steps for Determining Correct Load Limit
1. Locate the statement "THE
COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD
NEVER EXCEED XXX KG OR XXX
LBS" on your vehicle's placard
(tire inflation pressure label)
c:> page 254 , fig. 189 .
2. Determine the combined
weight of the driver and pas
sengers that will be riding in
your vehicle.
3 . Subtract the combined weight
of the driver and passengers
from
"XXX " kilograms or "XXX"
pounds shown on the sticker
c:> page 254 , fig. 189 .
4. The resulting figure equals the
available amount of cargo and
luggage load capacity. For ex
ample, if the
" XXX" amount
equals 1400 lbs and there will be five 150 lbs passengers in
your vehicle, the amount of available cargo and luggage load capacity is 650 lbs
(1400-750 (5
X 150) = 650 lbs)
5 . Determine the combined
weight of luggage and cargo
being loaded on the vehicle.
That weight may not safely ex
ceed the available cargo and
258
luggage load capa city cal culat
ed in Step 4.
6. If your vehicle will be towing a trailer, load from your trailer
will be tran sferred to your ve
hicle. Con sult thi s manual to
determine how this reduces
the available cargo and lug
gage load capacity of your vehi
c le .
~check the tire sidewall
(c:> page 245 , fig. 187) to deter
mine the designated load rating
for a spe cifi c tire.
Wheel bolts and rims
Wheel bolts
Wheel bolts mus t be clea n and loose n/tighte n
e asi ly.
Rims
Rims with a bo lted r im ring* o r with bo lted wheel
covers* cons ist of mult iple pieces . These com po
nen ts were bol ted togethe r using s pec ial bol ts
a nd a s pecial proc edur e. Yo u m ust no t rep air or
d isa sse mble th em
¢ & -
_& WARNING
Wh eel bolts th at are tig hte ned or re paired in
cor re ctly can be come loose and resu lt in los s
of ve hicle contro l, wh ic h increases the risk of
an accident. For t he cor rec t tighten ing s pec ifi
cation,
see¢ page 27 8, Finishing.
- Always keep the wheel bolts an d the
threads in the w heel h ub clean an d fre e of
greas e.
- On ly us e whee l bolts tha t fit th e rim.
- Always h ave damage d rims repaire d by an
auth orized Audi dealer or auth orized A udi
S erv ice Facility. Neve r repa ir o r disassemb le
~
Cl 00 .-< N r--N .-< 0 r--Vl 00
Emergency situations
General
This chapter is intended for trained emergency
crews and working personnel who have the nec
essary tools and equipment to perform these
operations.
Starting by pushing or
towing
~ Note
Vehicles with an automatic transmission can
not be started by pushing or towing.
Starting with jumper
cables
If necessary, the engine can be started by con
necting it to the battery of another vehicle .
If the engine should fail to start because of a dis
charged or weak battery, the battery can be con
nected to the battery of
another vehicle, using a
pair of jumper cables to start the engine.
Jumper cables
Use only jumper cables of sufficiently large cross
section
to carry the starter current safely. Refer
to the manufacturer's specifications.
Use only jumper cables with
insulated terminal
clamps which are distinctly marked :
plus(+) cable in most cases colored red
minus(-) cable
in most cases colored black.
A WARNING -
Batteries contain electricity, acid, and gas.
Any of these can cause very serious or fatal in
jury. Follow the instructions below for safe
handling of your vehicle's battery .
-Always shield your eyes and avoid leaning
over the battery whenever possible.
-A dead battery can freeze at temperatures
around 32 °F (0 °C) . If the vehicle battery is
frozen, you must thaw it before connecting
the jump start cables. If you do not, this in-
Emergency situations
creases the risk of an explosion and chemi
cal burns. After jump starting the vehicle,
drive to an authorized Audi dealer or author ized Audi Service Facility immediately to
have the vehicle battery checked.
- Do not allow battery acid to contact eyes or
skin . Flush any contacted area with water
immediately.
- Improper use of a booster battery to start a
vehicle may cause an explosion .
- Vehicle batteries generate explosive gases .
Keep sparks, flame and lighted cigarettes
away from batteries.
- Do not try to jump start any vehicle with a
low acid level in the battery .
- The voltage of the booster battery must also
have a 12-Volt rating . The capacity (Ah) of
the booster battery should not be lower
than that of the discharged battery. Use of
batteries of different voltage or substantial
ly different "Ah " rating may cause an explo
sion and personal injury.
- Never charge a frozen battery. Gas trapped
in the ice may cause an explosion.
- Never charge or use a battery that has been
frozen. The battery case may have be weak
ened.
- Use of batteries of different voltage or sub
stantially different capacity (Ah) rating may
cause an explosion and injury. The capacity
(Ah) of the booster battery should not be
lower than that of the discharged battery.
- Before you check anything in the engine
compartment, always read and heed all
WARNINGS
c>page 233.
@ Note
- Applying a higher voltage booster battery
will cause expensive damage to sensitive
electronic components, such as control
units, relays, radio, etc.
- There must be no electrical contact between
the vehicles as otherwise current could al
ready start to flow as soon as the positive
( + ) terminals are connected.
283
