2018.5 VAUXHALL GRANDLAND X headlights

[x] Cancel search: headlights

Page 122 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual 120LightingReversing lights
The reversing light comes on when
the ignition is on and reverse gear is
selected.
Misted light covers
The inside of the light housing may
mist up briefly in poor, wet and

Page 123 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual Lighting121Rear courtesy lightsIlluminate in conjunction with the front
courtesy light depending on rocker
switch position.
Reading lights
Operated by pressing  s and  t in the
courtesy lights.
Illust

Page 124 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual 122LightingThis function can be activated or
deactivated in the vehicle
personalisation.
Vehicle personalisation  3 105.
The following lights will additionally
switch on when the drivers door is
open

Page 186 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual 184Driving and operatingparking assist sensors, e.g. below
the bumper or underneath the
vehicle, are not displayed.
Do not reverse or park the vehicle
using only the rear view camera.
Always check the

Page 190 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual 188Driving and operatingThe panoramic view system may not
operate properly when:
● The surrounding is dark.
● The sun or the beam of headlights is shining directly into
the camera lenses.
● Weat

Page 203 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual Vehicle care201Vehicle careGeneral Information...................201
Accessories and vehicle modifications .......................... 201
Vehicle storage ........................202
End-of-life vehicl

Page 211 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual Vehicle care209Bulb replacement
Switch off the ignition and switch off
the relevant switch or close the doors.
Only hold a new bulb at the base. Do
not touch the bulb glass with bare
hands.
Use only t

Page 212 of 271

VAUXHALL GRANDLAND X 2018.5  Owners Manual 210Vehicle care3. Detach the bulb from the bulbsocket and replace the bulb.
4. Insert the bulb socket into the reflector housing.
5. Fit the cap on.
Low beam (2)
1. Remove the protective cover by pull
Page:   < prev 1-8 9-16 17-24 next >