2018.5 VAUXHALL ASTRA J fold seats

[x] Cancel search: fold seats

Page 56 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual 54Seats, restraintsAdjust ventilating to the desired
setting by pressing  A for the
respective seat one or more times.
The control indicator in the button
indicates the setting.
Ventilated seats are o

Page 74 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual 72StorageLoad compartmentDepending on the equipment, the
rear seat backrest is divided into two or three parts. All parts can be folded
down.
Before folding rear seat backrests,
execute the following

Page 76 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual 74Storage
● Guide the seat belts of the outerseats through side supports to
protect them against damage.
When folding the backrests, pull
the seat belts along with them.
● Take the seat belt out o

Page 79 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual Storage77
● Alternatively fold seat backrestsfrom the load compartment: pullswitch on left or right sidewall of
the load compartment to fold the
corresponding part of the rear
seat backrest.
9 Warni

Page 83 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual Storage81
On vehicles equipped with tyre repair
kit, the front lashing eyes are located
underneath the rear floor cover
behind the rear seats. To get access
to the lashing eyes, open the
perforated pa

Page 85 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual Storage83Service box
Install two hooks in the upper rail.
Insert the upper brackets of the box
from above into the hooks.
Alternatively install both hooks in the
lower rail. Plug in the lower brackets

Page 86 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual 84Storageand engage rod of net at one
side, compress rod and suspend and engage at the other side.
● Attach the hooks of safety net straps in loops underneath the
rear floor cover behind the rear
se

Page 110 of 317

VAUXHALL ASTRA J 2018.5  Owners Manual 108Instruments and controlsResetOn Midlevel display press  SET/CLR
on turn signal lever for several
seconds to reset. The ignition must be
switched on but engine not running.
On Uplevel display press
Page:   1-8 9-16 next >