2018.5 VAUXHALL ASTRA J GTC clock

Vehicle care217slightly into the socket and
rotating anticlockwise:
Tail light ( 1)
Rear fog light/Reverse light ( 2),
depending on the side.
Version with Light Emitting Diode
(LED)
Only rear fog light respectively
reverse light ( 2), depending on the
side of the vehicle, can be
changed.
5. Insert and turn bulb holder clockwise into the tail light
assembly. Fit the tail light
assembly in the tailgate and
tighten the screws. Attach all
covers.
4-door saloon
1. Remove cover on the responding side.
2.Unscrew two plastic securing nuts
from the inside by hand.
3. Carefully withdraw tail light assembly from recesses and
remove. Make sure that the cable duct remains in position.
4. Detach wiring plug from bulb carrier.

218Vehicle care
5. Remove the bulb holder byturning and replace the bulb by
withdrawing or pushing the bulb
slightly into the socket and rotating anticlockwise:
Tail light/Brake light ( 1)
Turn signal light ( 2)
6. Insert bulb holder and turn clockwise. Connect the wiring
plug. Fit light assembly with the
retaining pins into the recesses of
the vehicle body and tighten the
plastic securing nuts from the
inside of the load compartment.
Attach cover.
Light assembly in the tailgate
1. Open the tailgate and remove the
cover on the respective side.
2. Remove the bulb holder by turning and replace the bulb by
withdrawing or pushing the bulb
slightly into the socket and rotating anticlockwise:
Tail light ( 1)
Rear fog light/Reverse light ( 2),
depending on the side of the
vehicle.
3. Insert bulb holder and turn clockwise. Attach cover.
Side turn lights
3-door hatchback To replace bulb, remove lamp
housing:

Vehicle care2191. Slide lamp to its left side andremove at its right end.
2. Turn bulb holder anticlockwiseand remove from housing.
3. Pull bulb from bulb holder and replace it.
4. Insert bulb holder and turn clockwise.
5. Insert left end of the lamp, slide to
the left and insert right end.
4-door saloon To replace bulb, remove lamp
housing:
1. Slide lamp to its left side and remove at its right end.
2. Turn bulb holder anticlockwiseand remove from housing.
3. Pull bulb from bulb holder and replace it.

220Vehicle care4. Insert bulb holder and turnclockwise.
5. Insert left end of the lamp, slide to
the left and insert right end.
Number plate light
1. Insert screwdriver in recess of the
cover, press to the side and
release spring.
2. Remove lamp downwards, taking care not to pull on the cable.
3. Remove bulb holder from lamp housing by turning anticlockwise.
4. Pull bulb from bulb holder andreplace it.
5. Insert bulb holder into lamp housing and turn clockwise.
6. Insert lamp into bumper and let engage.
Interior lights
Courtesy light, reading lights Have bulbs replaced by a workshop.
Load compartment light
Have bulbs replaced by a workshop.
Instrument panel illumination
Have bulbs replaced by a workshop.

Vehicle care243The floor cover can be placed on the
projecting wheel.Vehicles equipped with a temporary
spare wheel:
Secure a damaged full size wheel
facing upwards with the wing nut in the spare wheel well after exchanging
the thread bolt by an extension bolt,
placed in the tool bag 3 226. To
replace the bolt:
1. Install the hexagon key of the wheel wrench ensuring that it
locates securely on the bolt.
2. Turn the wheel wrench anticlockwise to loosen the bolt.
Remove the bolt.
3. Take the extension bolt from the tool bag 3 226 and screw it in
hand-tight using the hexagon key
of the wheel wrench.
4. Store the tool box and the damaged wheel outside up in the
spare wheel well and secure it by
turning the wing nut clockwise on the bolt.
The floor cover can be placed on the
projecting wheel.
Replace the extension bolt with the
short bolt before placing the
temporary spare wheel in the well
after renewing or repairing the
defective wheel.
Stowing the spare wheel back in
the well after replacing the
damaged wheel
1. Open the floor cover, loosen and remove wing nut.
Only 3-door hatchback: open floor
cover, remove rear storage,
loosen and remove wing nut and
conus.
2. Only 4-door saloon with temporary spare wheel: replace
the extension bolt with the short
bolt by using the hexagon key of
the wheel wrench.
3. Place the tools in the tool box or the tool bag 3 226.
4. Place spare wheel facing upwards, in the wheel well and
secure by tightening the wing nut.

287Climate control ............................. 15
Climate control systems .............128
Clock............................................. 76
Code ............................................. 98
Control indicators.......................... 83
Control of the vehicle .................139
Controls ........................................ 72
Convex shape .............................. 29
Coolant and antifreeze ...............253
Cruise control ...................... 91, 158
Cupholders .................................. 59
Curtain airbag system .................. 51
Curve lighting.............................. 119
D Danger, Warnings and Cautions ...4
Daytime running lights ...............119
Declaration of conformity ............274
Diesel fuel system bleeding .......206
Door open .................................... 92
Doors ............................................ 25
Driver assistance systems ..........158
Driver Information Centre .............92
Driving characteristics and towing tips .............................. 193
Driving hints ................................ 139
E Electric adjustment ......................29
Electrical system......................... 221
Electric parking brake ...........87, 152Electric parking brake fault ...........88
Electronic climate control system 131
Electronic driving programmes ..148
Electronic Stability Control.......... 154
Electronic Stability Control and Traction Control system ............89
Electronic Stability Control off ...... 89
End-of-life vehicle recovery .......200
Engine compartment fuse box ...222
Engine coolant ........................... 202
Engine coolant temperature gauge ....................................... 82
Engine data ............................... 261
Engine exhaust .......................... 144
Engine identification ...................257
Engine oil ................... 201, 253, 258
Engine oil pressure ......................90
Entry lighting .............................. 126
ERA GLONASS .......................... 112
Event data recorders ..................281
Exhaust filter ......................... 89, 144
Exit lighting ................................ 126
Exterior care .............................. 248
Exterior light ................................. 91
Exterior lighting ....................13, 115
Exterior mirrors ............................. 29
F
Fault ........................................... 149
First aid ......................................... 68First aid kit ................................... 68
Fixed air vents ........................... 136
Fog light ....................................... 91
Fog lights ................................... 211
Folding mirrors ............................. 30
Following distance indication ......171
Forward collision alert................. 168
Front airbag system .....................50
Front fog lights ........................... 123
Front seats.................................... 39
Front storage ................................ 60
Front turn lights .......................... 213
Fuel............................................. 187
Fuel for diesel engines ..............188
Fuel for liquid gas operation .......189
Fuel for petrol engines ...............187
Fuel gauge ................................... 80 Fuel selector ................................ 80
Fuses ......................................... 221
G Gauges ......................................... 79
General information ...................193
Glass panel .................................. 36
Glovebox ..................................... 59
H Halogen headlights ....................207
Hand brake ......................... 151, 152
Hazard warning flashers ............122
Headlight flash ........................... 117