2018.5 VAUXHALL ADAM wheel

[x] Cancel search: wheel

Page 145 of 245

VAUXHALL ADAM 2018.5  Owners Manual Driving and operating143Deactivation
TC can be switched off when spinningof drive wheels is required: press  b
briefly.
A status message appears in the
Driver Information Centre when TC is
deactivated

Page 147 of 245

VAUXHALL ADAM 2018.5  Owners Manual Driving and operating145Activation
Press B when engine is running. The
system works from standstill up to
22 mph, and in reverse gear. Above
this speed, the system changes to
normal mode. When activat

Page 148 of 245

VAUXHALL ADAM 2018.5  Owners Manual 146Driving and operatingDriver assistance
systems9 Warning
Driver assistance systems are
developed to support the driver
and not to replace the drivers
attention.
The driver accepts full
responsibili

Page 149 of 245

VAUXHALL ADAM 2018.5  Owners Manual Driving and operating147
Reduce speedWith cruise control active, hold thumb
wheel turned to  SET/- or briefly turn to
SET/-  repeatedly: speed decreases
continuously or in small increments.
Deactivati

Page 150 of 245

VAUXHALL ADAM 2018.5  Owners Manual 148Driving and operatingActivation of the functionality
Press L. If cruise control has been
activated before, it is switched off when speed limiter is activated and
the control indicator  m extinguish

Page 158 of 245

VAUXHALL ADAM 2018.5  Owners Manual 156Driving and operatingfor parallel parking slots or 6 m forperpendicular parking slots after the
Stop  message is given. The system
calculates the optimal path into the
parking slot.
A brief vibrati

Page 167 of 245

VAUXHALL ADAM 2018.5  Owners Manual Vehicle care165Vehicle careGeneral Information...................165
Accessories and vehicle modifications .......................... 165
Vehicle storage ........................166
End-of-life vehicl

Page 187 of 245

VAUXHALL ADAM 2018.5  Owners Manual Vehicle care185No.Circuit1–2–3Power windows4Voltage transformer5Body control module 16Body control module 27Body control module 38Body control module 49Body control module 510Body control module 6