Periodic maintenance an d a djustment
6-9
6 2. Pull the front of the panel out, and
then slide the panel forward to re-
lease it in the rear.
To install the panel
1. Secure the rear of the panel, and then push the front of the panel in.
2. Install the screw. Panel B
To remove the panel
1. Slide the panel lock cover open,
insert the key into the lock, and
then turn it 1/4 turn clockwise.
2. Pull the front of the panel out with the key inserted in the lock, and
then slide the panel forward to re-
lease it in the rear. To install the panel
1. Secure the rear of the panel, and
then push the front of the panel in
with the key inserted in the lock.
2. While pushing the panel inward, turn the key counterclockwise to
the original position, remove it,
and then close the panel lock cov-
er.
1. Screw
1
1. Panel B
2. Panel lock cover
3. Unlock.
1
2
3
UBT4E0E0.book Page 9 Thursday, November 17, 2016 10:55 AM
Periodic maintenance an d a djustment
6-32
6
The spare fuse is located on the rear of
the starter relay holder.
To access the spare fuse, remove the
starter relay (together with its holder)
by pulling it out, then turn the starter re-
lay over. If the fuse is blown, replace it as fol-
lows.
1. Turn the key to “ ” and turn off all electrical circuits.
2. Remove the blown fuse, and then install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a hi gher ampera ge
ratin g than recommen ded to
avoi d causin g extensive dam-
a g e to the electrical system an d
possi bly a fire.
[EWA15132]
3. Turn the key to “ ” and turn on
the electrical circuits to check if
the devices operate.
4. If the fuse immediately blows again, have a Yamaha dealer
check the electrical system.
1. Fuse
2. Starter relay holder
1
2
1. Spare fuse
2. Starter relay holder
3. Starter relay
Specified fuse:
15.0 A
1 2
3
UBT4E0E0.book Page 32 Thursday, November 17, 2016 10:55 AM
