Page 345 of 584

DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.343
Cross Traffic Alert (CTA)* limitations
CTA functionality may be reduced in certain sit-uations.
Limitations
CTA has limitations in certain situations, forexample, the CTA sensors cannot "see" throughother parked vehicles or obstructions.
The following are several examples where CTA's"field of vision" may initially be limited andapproaching vehicles cannot be detected untilthey are too close:
The vehicle is pulled far into a parking space
In angled parking spaces, CTA may be "blind" on oneside
CTA's blind area
CTA's "field of vision"
However, as you back your vehicle out of a park-ing space, CTA's "field of vision" expands.
Examples of other limitations include:
•Dirt, ice or snow obstructing the sensors mayreduce the system's function or make itimpossible to detect other vehicles orobjects.
•CTA is deactivated if a trailer's wiring is con-nected to the vehicle's electrical system.
Maintenance
The CTA sensors are located on the inside of therear fenders/bumper.
Keep the highlighted area clean (on both sides of thevehicle)
For the system to function optimally, the areaover and around the sensors must be kept clean.
Do not attach any objects, tape, decals, etc., onthe surface of the sensors.
CAUTION
Repairs to the BLIS/CTA systems and/orrepainting the rear bumper should only bedone by a trained and qualified Volvo servicetechnician.
Related information
•Cross Traffic Alert (CTA)* (p. 341)
•Activating/deactivating Cross Traffic Alert(CTA)* (p. 342)
Page 346 of 584
||
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.344
•Blind Spot Information (BLIS)* with CrossTraffic Alert (CTA)* symbols and messages(p. 345)
•Blind Spot Information (BLIS)* limitations(p. 341)
Page 347 of 584

DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.345
Blind Spot Information (BLIS)* with
Cross Traffic Alert (CTA)* symbolsand messages
In situations where Blind Spot Informationand/or Cross Traffic Alert are not functioning
properly or if the function is interrupted, a sym-bol and a text message may be displayed in theinstrument panel. Follow the instructions provi-ded.
The following table lists several symbols and messages:
MessageExplanation
Blind spot sensor
Service required
The system is not functioning properly. Contact a trained and qualified Volvo service technician
Blind spot system off
Trailer attached
BLIS and CTA have been deactivated because a trailer has been connected to teh vehicle's electrical system.
A text message can be erased by briefly pressingthe O button on the right-side steering wheelkeypad. If the message recurs, contact a trainedand authorized Volvo service technician orretailer.
Related information
•Cross Traffic Alert (CTA)* (p. 341)
•Blind Spot Information (BLIS)* (p. 339)
Page 348 of 584

DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.346
Road Sign Information (RSI)*
RSI is a feature that helps the driver see roadsigns showing the posted speed limit.
Examples of readable road signs
If the vehicle passes a sign showing the speedlimit, this will be displayed in the instrument paneland the head-up display*.
NOTE
If the vehicle is equipped with the SensusNavigation system, speed-related informationis provided by this system in the followinginstances:
•In cases where the speed limit is givenindirectly (e.g., when driving on highwaysor other major roads).
•If a previously read speed limit sign is nolonger considered valid and no new signhas been passed.
If a third-party navigation system is beingused, RSI has no support for speed-relatedinformation.
WARNING
RSI does not function in all situations and isonly intended to provide supplementary infor-mation.
The driver is always responsible for operatingthe vehicle safely.
Related information
•Road Sign Information (RSI)* operation(p. 346)
•Road Sign Information (RSI)* limitations(p. 348)
•Speed limiter (SL)* (p. 267)
•Head-up display (HUD)* (p. 122)
Road Sign Information (RSI)*operation
Speed limit information
Speed limit information
When RSI registers a road sign showing thespeed limit, this sign is displayed as a symbol onthe instrument panel.
Settings
RSI settings can be made in the center display'sTop view.
Go to: SettingsMy CarIntelliSafeRoad Sign Information.
Page 349 of 584

DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.347
Activating/deactivating RSI
RSI can be activated/deacti-vated in the center display'sfunction view.
–Tap the Road Sign Information button inFunction view.
>When RSI is activated, the indicator lightin the button will be green. The indicatorlight will be gray when the function isdeactivated.
Activating/deactivating the speed warning
function
The driver can be alerted if the current speedlimit is being exceeded (the symbol for the cur-rent speed limit will begin to flash). This functioncan be activated or deactivated and the limit for awarning can be set.
1.Tap Settings in the center display's Topview.
2.Tap My CarIntelliSafeRoad SignInformation.
3.Tap Speed Limit Warning to activate/deac-tivate this function.
>If the function is activated, a speed selec-tor will be displayed.
4. Select the limit at which the speed warning isto be given by pressing the up/down arrows.
Please be aware that the set warning limitwill not be used when a speed camera sym-bol is displayed in the instrument panel.
Activating/deactivating the audible alert
The audible alert can be activated/deactivatedand the limit for a warning can be set.
1.Tap Settings in the center display's Topview.
2.Tap My CarIntelliSafeRoad SignInformation.
3.Tap Audio Warning to activate/deactivatethis function.
Speed camera alert
Speed camera warning in the instrument panel (genericillustration)
If the Sensus navigation systemin your vehicle is being used,the driver can be alerted if thevehicle is exceeding a detectedspeed limit and is approachinga speed camera.
Related information
•Road Sign Information (RSI)* (p. 346)
•Road Sign Information (RSI)* limitations(p. 348)
Page 350 of 584

DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.348
Road Sign Information (RSI)*limitations
The RSI function may be limited in certain situa-tions.
RSI may have difficulty reading signs that are:
•Faded
•Located in a curve
•Twisted or damaged
•Positioned high above the road
•Obstructed (by bushes, etc.)
•Partially covered by snow, ice, etc.
•If the digital maps used by the SensusNavigation system* are not up-to-date or do
not contain speed information7.
The camera used by RSI has certain limitations.See the article "Camera limitations" for additionalinformation.
NOTE
RSI may perceive certain types of bicycleholders (with wiring attached to the trailerelectrical socket) as a trailer, which may resultin faulty speed limit information to the driver.
Related information
•Road Sign Information (RSI)* (p. 346)
•Road Sign Information (RSI)* operation(p. 346)
•Camera limitations (p. 323)
Driver Alert Control (DAC)
DAC is intended to alert the driver if his/her driv-ing becomes erratic due to e.g., distraction orfatigue.
DAC is designed to help detect a slowly chang-ing driving pattern. It is primarily intended to beused on main roads and is not meant for use incity traffic.
The function activates initially when the vehicle'sspeed first exceeds 40 mph (65 km/h) andremains active as long the speed remains aboveapprox. 38 mph (60 km/h)
A camera monitors the traffic lane's side markerlines and compares the direction of the road withthe driver
Page 351 of 584
DRIVER SUPPORT
349
If the driving pattern becomesnoticeably erratic, the driver willbe alerted by an audible signaland Driver Alert Time for abreak will appear in the instru-ment panel along with a sym-bol.
The warning will be repeated if the driving patterndoes not change.
WARNING
•DAC is not intended to extend the dura-tion of driving. Always plan breaks at reg-ular intervals to help remain alert.
•A warning from DAC should not beignored. A driver may not be aware ofhow fatigued he/she has become.
•In certain cases, fatigue may not affectthe driver
Page 352 of 584
DRIVER SUPPORT
350
Driver Alert Control limitations
Driver Alert Control (DAC) may in certain situa-tions have limited or reduced functionality.
In certain situations, DAC may provide warningseven if the driver