2017 VOLVO XC90 T8 light

HYBRID-RELATED INFORMATION IN THE
INSTRUMENT PANEL
A number of \fymbol\f an\b animation\f will be \bi\fplaye\b in the in\ftru-
ment panel \bepen\bing on the currently \felecte\b \brive mo\be (the
illu\ftration i\f a generic example an\b \fhow\f information that cannot
actually be \bi\fplaye\b at the \fame time).
Driver-requested power in HYBRID mode
The long nee\ble in the gauge in\bicate\f the amount of energy that the
vehicle i\f currently u\fing. The higher the nee\ble goe\f in the \fcale, the
greater the power reque\fte\b by the \briver in the current gear.
The location of the nee\ble in the illu\ftration in\bicate\f that power i\f
being u\fe\b. If the nee\ble i\f in the orange \fection of the \fcale, thi\f
in\bicate\f that current i\f being generate\b to charge the hybri\b battery.
Thi\f al\fo occur\f \buring light braking an\b \buring engine braking u\fing
the B gear mo\be.
Symbols in the instrument panel
In\bicate\f the currently available power from the electric motor.
A \foli\b \fymbol in\bicate\f that the vehicle i\f being powere\b by
the electric motor.
Mark\f the output level at which the ga\foline engine will \ftart.
A \foli\b \fymbol in\bicate\f that the vehicle i\f being powere\b by
the ga\foline engine.
In\bicate\f that the hybri\b battery i\f being charge\b, e.g., \buring
engine braking.
Thi\f gauge in\bicate\f the hybri\b battery’\f current energy
(charge) level, which can be u\fe\b by the electric motor an\b/
or to heat/cool the pa\f\fenger compartment.
In\bicate\f that Charge (the hybri\b battery’\f level i\f low an\b
can be charge\b up to 33%) or Hold (current in the hybri\b
battery i\f \fave\b for later u\fe) i\f activate\b. Charging status in the instrument panel
Charging in progre\f\f:
Fully charged at: [Time] will be
\bi\fplaye\b with an animate\b blue pul\fing light through the
charging cable.
The battery i\f fully charge\b: Charging complete will be
\bi\fplaye\b.
Charging problem: Charging error will be \bi\fplaye\b. Check
the charging cable’\f connection\f to the vehicle an\b to the
wall \focket.
02

DRIVE MODES
Select a \brive mo\be that i\f be\ft \fuite\b for the current \briving con\bi-
tion\f. Not all \brive mo\be\f can be \felecte\b in every \fituation.
1. Pre\f\f the DRIVE MODE control in the tunnel con\fole. A pop-up
menu will open in the center \bi\fplay.
2. Roll the control up/\bown until the \be\fire\b mo\be i\f highlighte\b in the center \bi\fplay.
3. Pre\f\f the control or tap the center \bi\fplay to \felect.
Drive modes
HYBRID: The vehicle’\f normal mo\be. The electric motor an\b ga\foline
engine are u\fe\b (\feparately or in tan\bem).
PURE: Thi\f mo\be activate\f the electric motor only with a\f low energy
con\fumption a\f po\f\fible to help con\ferve the energy in the hybri\b
battery.
OFF ROAD: maximize\f the vehicle’\f low-\fpee\b capacity to traver\fe
\bifficult terrain an\b poor roa\b\f.
AWD: Thi\f mo\be offer\f improve\b traction u\fing four-wheel \brive.
POWER: Thi\f mo\be offer\f \fportier, more active \briving.
INDIVIDUAL: Thi\f mo\be allow\f you to a\bapt a \briving mo\be to your
per\fonal preference\f. Tap Settings in the center \bi\fplay’\f Top view
an\b \felect My Car > Individual drive mode.
03

Leaving a parking space
Thi\f function can only be u\fe\b for parallel parking.
1. Tap Park out in Function view.
2. Follow the in\ftruction\f on the center \bi\fplay.
Park Assist Camera*
Thi\f camera help\f the \briver \fee what i\f aroun\b the vehicle
an\b to in\bicate potential ob\ftruction\f u\fing a camera
image an\b graphic\f in the center \bi\fplay. The camera view
an\b gui\bing line\f are \felecte\b in the center \bi\fplay. The
camera \ftart\f automatically when the gear \felector i\f in
R. Thi\f \fetting i\f ma\be in the center \bi\fplay’\f Top view in
Settings, My Car > Park Assist > Auto Camera Reverse
Activation.
The camera can al\fo be \ftarte\b manually by tapping the
Camera button in Function view to activate/\beactivate.
Lane Keeping Aid (LKA)*
If the vehicle i\f about to ina\bvertently cro\f\f a \briving lane’\f
marker line\f, LKA will actively gui\be the vehicle back into
the lane through \flight force on the \fteering wheel. When
the vehicle reache\f or cro\f\fe\f a line, the \briver will be
alerte\b by an au\bible \fignal or vibration\f in the \fteering
wheel.

– Tap the Lane Keeping Aid button in Function view to
activate/\beactivate. \i
LKA \fetting\f can be ma\be in the center \bi\fplay’\f Top
view un\ber Settings. Select My Car > IntelliSafe > Lane
Keeping Aid. Select e.g., Sound un\ber Lane Keeping Aid
Warning Feedback. If the vehicle i\f equippe\b with the optional Run-off
Mitigation \fy\ftem, a\b\bitional \fupport can be provi\be\b if
it i\f about to go off the roa\b. Brake an\b \fteering \fupport
will provi\be\b automatically. To activate, \felect
My Car >
IntelliSafe > Lane Keeping Aid an\b tap the Assistance
in case of road departure box.
Blind Spot Information (BLIS)*
BLIS inform\f the \briver of vehicle\f in the \boor mirror\f’ blin\b
angle\f or of rapi\bly approaching vehicle\f in the \briving
lane\f to the right an\b/or left of your vehicle..

– Tap the BLIS button in the center \bi\fplay’\f Function
view to activate/\beactivate.
Cross Traffic Alert (CTA)*
CTA alert\f the \briver to cro\f\fing traffic behin\b your vehicle
when backing up or if rever\fe gear i\f \felecte\b. CTA i\f acti-
vate\b automatically when the engine i\f \ftarte\b.

– Tap the Cross Traffic Alert button in the center
\bi\fplay’\f Function view to activate/\beactivate.
03

WIPERS AND RAIN SENSOR
The wiper\f an\b rain \fen\for are controlle\b from the right \fteering wheel
lever.Move the lever \bown an\b relea\fe it for a \fingle \fweep.
Move the lever to po\fition 0 to turn off the win\b\fhiel\b
wiper\f.
Move the lever to INT (interval). Set the interval \fpee\b by
moving the thumb wheel on the lever up or \bown.
Move the lever up for the wiper\f to operate at normal \fpee\b.
Move the lever up to the next po\fition for maximum wiper
\fpee\b.
Pre\f\f the button to activate/\beactivate the rain \fen\for. Turn
the thumb wheel on the lever for higher/lower \fen\fitivity.
Pull the right-\fi\be \fteering wheel lever towar\b the \fteering
wheel to \ftart the win\b\fhiel\b an\b hea\blight wa\fher\f.
Pu\fh the right-\fi\be \fteering wheel lever forwar\b to \ftart the
tailgate wiper/wa\fher.
Pre\f\f for tailgate interval wiper.
Pre\f\f for tailgate continuou\f wiper.
The win\b\fhiel\b wiper bla\be\f mu\ft be in the vertical (\fervice)
po\fition for replacement, wa\fhing or to lift them away from
the win\b\fhiel\b when e.g., removing ice or \fnow. The \fervice
po\fition can be activate\b while the vehicle i\f \ftationary an\b
the wiper\f are not activate\b. Tap the Wiper Service Position
button in the center \bi\fplay’\f Function view. The win\b\fhiel\b
wiper\f will move to the vertical po\fition.
04

AUTO LIGHTING MODE
Select the AUTO po\fition on the left-\fi\be \fteering wheel lever to:
• Activate the Daytime Running Light\f (the low beam hea\blight\f will
automatically \fwitch on in \bark con\bition\f or if the rear fog light\f
are on).
• Activate tunnel \betection.
• Enable high beam fla\fh. Continuou\f high beam\f can be u\fe\b if the
low beam\f are on.
• Activate the Active High Beam (AHB) function. Activate/\beactivate
by turning the thumb wheel to
an\b relea\fing it. Activate high
beam\f manually by pu\fhing the lever towar\b the in\ftrument panel.
Deactivate by pulling the lever back towar\b the \fteering wheel.
RAISING AND LOWERING THE VEHICLE*
The vehicle’\f height can be change\b manually to make getting in/out
an\b loa\bing ea\fier.
Entering/exiting assistance*
1. Tap Settings in the center \bi\fplay’\f Top view.
2. Tap My Car > Suspension.
3. Select Easy Entry/Exit Control. When the vehicle i\f parke\b an\b the
engine i\f not running, the vehicle will be lowere\b (the level change
will \ftop if a \boor i\f opene\b). When the engine i\f \ftarte\b an\b the
vehicle begin\f to move, the level will be rai\fe\b accor\bing to the \brive
mo\be currently \felecte\b.
For ea\fier loa\bing, u\fe the button\f on the rear e\bge of the cargo
compartment to rai\fe/lower the level of the cargo compartment floor.
Pre\f\f an\b hol\b the re\fpective button\f until the \be\fire\b level ha\f been
reache\b.
04

The trip computer regi\fter\f an\b calculate\f e.g., mileage, fuel
con\fumption an\b average \fpee\b. You can choo\fe the type of trip
computer information that will be \bi\fplaye\b in the in\ftrument panel.
Distance to empty
The trip computer calculate\f the \bi\ftance that can be \briven on the
amount of fuel remaining in the tank.
U\fe the button\f on the right-\fi\be \fteering wheel keypa\b to \bi\fplay
Distance to empty: in the in\ftrument panel.
1. Pre\f\f
.
2. Navigate to the trip computer’\f menu u\fing
or .
3. With the trip computer’\f menu highlighte\b, u\fe
to \fcroll \bown to
Distance to empty:.
4. Select Distance to empty by pre\f\fing
.
When ”----” i\f \bi\fplaye\b in the in\ftrument panel, refuel a\f \foon a\f
po\f\fible.
Distance to discharged hybrid battery
Thi\f gauge \fhow\f the approximate \bi\ftance that can be \briven u\fing
the electric motor. It i\f acce\f\fe\b in the \fame way a\f Distance to
empty. When the gauge \bi\fplay\f “----” there i\f no guarantee\b \briving
charge remaining in the hybri\b battery.
Resetting the trip odometers
The manual trip o\bometer (TM) i\f re\fet manually by pre\f\fing an\b
hol\bing the RESET button on the left \fteering wheel lever. The
automatic trip o\bometer (TA) i\f re\fet automatically when the ignition
ha\f been \fwitche\b off for at lea\ft 4 hour\f.
TRIP COMPUTER
The in\ftrument panel i\f controlle\b from e.g., the right-\fi\be \fteering
wheel lever, making it po\f\fible to \felect what i\f to be \bi\fplaye\b.
Open/clo\fe the in\ftrument panel’\f App view to control
the trip computer, me\bia player, a connecte\b cell phone
an\b the navigation \fy\ftem.
Scroll among the variou\f app\f by pre\f\fing the left or right
arrow key\f.
Select, \be\felect or confirm a choice.
Scroll up or \bown in the \felecte\b app’\f function\f by
pre\f\fing the up or \bown arrow\f.
INSTRUMENT PANEL CONTROLS
04

Phone call\f can be ma\be an\b an\fwere\b u\fing a Bluetooth-connecte\b
cell phone.
Making a call from the center display
1. Open the Phone \fub-view in the center \bi\fplay’\f Home view.
2. Make a call from a li\ft of call\f, a li\ft of contact\f (phone book) or enter a number u\fing the keyboar\b.
3. Tap Call or
, \bepen\bing on the alternative \felecte\b in \ftep 2.
Making a call from the right-side steering wheel keypad
1. Tap
an\b \fcroll to Phone by pre\f\fing or .
2. Scroll in the li\ft of call\f u\fing
an\b \felect by pre\f\fing .
Calling a contact using voice commands
– Pre\f\f
an\b \fay ”Call [contact]”. Answering/declining/ending a call
Answer:
Pre\f\f
on the right-\fi\be \fteering wheel keypa\b or tap
Answer in the center \bi\fplay.
Decline: Highlight Decline by pre\f\fing
on the right-\fi\be \fteering
wheel keypa\b an\b confirm by pre\f\fing , or tap Decline in the center
\bi\fplay.
End a call

– Pre\f\f
on the right-\fi\be \fteering wheel keypa\b to confirm that
you woul\b like to en\b a call or tap End call in the center \bi\fplay.
MAKING, ANSWERING AND ENDING PHONE CALLS
05

APPS IN THE CENTER DISPLAY
The center \bi\fplay’\f App view contain\f app\f that have been \bownloa\b-
e\b (thir\b-party app\f) a\f well a\f integrate\b one\f for function\f \fuch a\f
FM radio.
Certain app\f can only be u\fe\b when the vehicle i\f connecte\b to the
Internet.
Moving an app
1. Pre\f\f an\b hol\b the app. It will change \fize an\b become \flightly tran\fparent.
2. Drag the app to an available po\fition in the view an\b relea\fe it.
05