2017 VOLVO V90 CROSS COUNTRY turn signal bulb

3

Top tether anchors80
Integrated booster cushion *
81
Raising the integrated booster cushion *
83
Stowing the integrated booster cushion *
85
PRACTICAL INFORMATION
Passenger compartment storage spaces
88
Engine compartment overview 89
Using the glove compartment 90
Tunnel console 91
Sun visors 91
Loading 92
Grocery bag holder 94
Cargo net 94
Steel cargo grid *
96
Load anchoring eyelets 97
Cargo compartment cover *
98
Automatically arming/disarming the alarm 100
Octane rating 100
Opening/closing the fuel filler door 101
Tires 102
Tire sidewall designations 104
Wheel (rim) designations 106
Tire terminology 106
Tire direction of rotation 107
Tread wear indicator 108
Loading specifications 108
Uniform Tire Quality Grading 109
Snow tires and chains 110

Checking tire inflation pressure110
Changing tires 112
Tools 112
Jack 113
Spare tire 113
Wheel bolts 115
Removing a wheel 115
Installing a wheel 117
Tire Pressure Monitoring System (TPMS) 117
Checking tire inflation pressure 119
Reinflating tires equipped with the Tire Pressure Monitoring System (TPMS) 120
Calibrating the Tire PressureMonitoring System (TPMS) 121
Tire sealing system 122
Using the tire sealing system 124
Inflating a tire with the tire sealingsystem compressor 127
Electrical sockets 129
Replacing bulbs 132
Removing the rectangular headlightcover 134
Replacing low beam headlight bulbs 135
Replacing High Beam headlight bulbs 135
Replacing front parking light bulbs 136
Replacing front turn signal bulbs 137

PRACTICAL INFORMATION
132
Replacing bulbs
The halogen headlight and backup light bulbs 10
can be replaced by the owner.
Before the halogen headlight bulbs can be replaced, that plastic covering over the headlighthousing has to be removed and the housing hasto be lifted out of the vehicle.
NOTE
Halogen headlights are not available on all models or in all markets. Consult your Volvo retailer if you are uncertain about the type of headlights in your vehicle.
The turn signal, high/low beam, Daytime Running Light and parking light bulbs will be accessiblewhen the plastic covering has been removed.
–Release the pins in the plastic covering's four clips by pressing them down with ascrewdriver or similar object and remove thecovering.
NOTE
The pins in the clips have to be pressed back completely before the clips are placed in theplastic covering. When the covering is put back in place, the pins must be pressed so that their upper sur-face is flush with the surface of the clip.
NOTE
• For information regarding any bulbs not mentioned in this section, please contactyour Volvo retailer or a trained andauthorized Volvo service technician.
• Always switch off the ignition before star-ting to replace a bulb.
• If an error message remains in the dis-play after a faulty bulb has been replaced,contact an authorized Volvo workshop.
• Condensation may form temporarily onthe inside of the lenses of exterior lightssuch as headlights, fog lights, or taillights.This is normal and the lights aredesigned to withstand moisture. Normally,condensation will dissipate after thelights have been on for a short time.
• The optional Active Bending Light bulbscontain trace amounts of mercury. Thesebulbs should always be disposed of by atrained and qualified Volvo service techni-cian.
10
Halogen bulbs are not available on all models.

PRACTICAL INFORMATION
}}
* Option/accessory.133
CAUTION
Never touch the glass of bulbs with your fin- gers. Grease and oils from your fingers vapor-ize in the heat and will leave a deposit on thereflector, which will damage it.
WARNING
•The ignition should be switched off com- pletely (be in ignition mode
0) when
replacing bulbs.
• If the engine has been running just prior to replacing bulbs in the headlight hous-ing, please keep in mind that componentsin the engine compartment will be hot.
Front bulbs (vehicles with halogen headlights)
Low beam
High beam
Parking light/Daytime Running Light
Turn signal
Fog light with corner illumination (LED)
*
Taillight bulbs
Side marker light (LED)
Taillight (LED)
Fog light11
Backup light
Turn signal
12
Brake light (LED)
High-mounted brake light (LED)
Related information
•
Bulb specifications (p. 139)
• Replacing front parking light bulbs (p. 136)
• Replacing front turn signal bulbs (p. 137)
11
Not available in all markets.
12 Must be replaced by a trained and qualified Volvo service technician.

PRACTICAL INFORMATION
}}
137
Replacing front turn signal bulbs On models with halogen headlights, the front turn signal bulb can be replaced by the owner.
Before the bulb can be accessed, the headlight housing's cover must be removed, see the article"Replacing bulbs."
Driver's side headlight housing shown
1. Remove the rubber cover over the turn signalbulb.
2. Press the retaining catches together and pull the bulb holder straight out.
3. The bulb holder and bulb must be replaced as one unit.
4. Press the new bulb holder into the socket.
5. Put the rubber cover back in place.
Related information
• Replacing bulbs (p. 132)
• Bulb specifications (p. 139)
Replacing backup lights The backup light bulb is behind the panel in the tailgate.
1. Remove the panel on the inside of the tail-
gate by turning both clips counterclockwise a quarter turn. Remove the panel.

PRACTICAL INFORMATION
}}
139
Bulb specifications The following specifications apply to models equipped with halogen13
headlights, a backup
light and rear fog lights. If other bulbs need to be replaced, contact a trained and qualifiedVolvo service technician.
Function [W]A
Type
Low beam 55 H11
High Beam 65 H9
Front turn signal 24 PY24WDaytime running light/ parking light 21/5 W21/5W
Backup light 21 H21W LL Rear fog light B
21 H21W LL
AWatt
B Rear fog lights are not available on all models or in all markets.
Related information
• Replacing bulbs (p. 132)
Replacing wiper blades
The wiper blades should be replaced regularly for best effect. The windshield wiper blades must be in the verti- cal (service) position for replacement, washingor to lift them away from the windshield whene.g., removing ice or snow.
Replacing the windshield wiper blades
With the wipers in the service position, fold out the wiper arm from the windshield. Pressthe button on the wiper blade attachmentand pull the wiper blade straight out, parallelwith the wiper arm.
Slide in the new wiper blade until it clicks into place.
Check that the blade is securely in place.
4. Press the wipers back against the wind- shield.
13Halogen headlights are not available in all models.

INDEX
180
T
Technician certification 47
Temporary spare tire 113
Tire inflation pressure 174
Tire Pressure Monitoring System 117, 120calibrating 121
Tire Pressure Monitoring System (TPMS) 121
Tires 102, 112 changing 112
changing from summer to winter 107
glossary of terms 106
improving economy 102
inflation pressure 110
inflation pressure table 174installing (mounting) a wheel on the
vehicle 117
rotation 103
snow 110
spare 113
specifications 104
storing 103
studded 110
tire pressure monitoring system 117, 120
tire sealing system 122, 124, 127
tread wear indicator 108
uniform tire quality grading 109
wheel bolts 115
Tire sealing system 122, 124, 127
Top tether anchors (child restraint sys- tems) 80
Towbar 144 Towing a trailer trailer hitch 144
Trailer hitch 144Trailer towing trailer hitch 144
Transmission oil 175
Tread wear indicator 108Turn signals changing bulbs 137
U
Uniform Tire Quality Grading 109
V
Vehicle Event Data 20
Vehicle information 8
Vehicle loading 92, 108
Vehicle weights 167
Volvo and the environment 9
Volvo ID 21
Volvo On Call Roadside Assistance 8
Volvo programs 8
W
Washer fluid 142 Wheels
changing 112, 115
storing 103
Whiplash Protection System 53 Windows laminated glass 47
Windshield washer fluid reservoir 142
Windshield wiper blades 139Windshield wipers service position 140
Wiper blades replacing 139, 140