2017 VAUXHALL INSIGNIA display

[x] Cancel search: display

Page 156 of 327

VAUXHALL INSIGNIA 2017  Owners Manual 154Driving and operatingDriving and
operatingDriving hints ............................... 155
Control of the vehicle ...............155
Steering ................................... 155
Starting and o

Page 159 of 327

VAUXHALL INSIGNIA 2017  Owners Manual Driving and operating157Emergency shut off during driving
Press  Engine Start/Stop  for longer
than 2 seconds or press twice briefly
within 5 seconds  3 158.
Steering wheel lock The steering wheel loc

Page 163 of 327

VAUXHALL INSIGNIA 2017  Owners Manual Driving and operating161● The climate control systemallows an Autostop.
● The brake vacuum is sufficient.
● The self-cleaning function of the diesel particle filter is not active.
● The vehicl

Page 167 of 327

VAUXHALL INSIGNIA 2017  Owners Manual Driving and operating165Caution
Avoid contact of the paintwork withAdBlue.
In case of contact, rinse off with water.
AdBlue freezes at a temperature of
approx. -11 °C. As the vehicle is
equipped with

Page 168 of 327

VAUXHALL INSIGNIA 2017  Owners Manual 166Driving and operatingHigh emission warnings
If the exhaust emission rises above a certain value, warnings similar to the
range warnings will be displayed in
the Driver Information Centre.
Requests

Page 169 of 327

VAUXHALL INSIGNIA 2017  Owners Manual Driving and operating167The vehicle must be parked on a level
surface.
The filler neck for AdBlue is located
behind the fuel filler flap, which is located at right rear side of the
vehicle.
The fuel f

Page 173 of 327

VAUXHALL INSIGNIA 2017  Owners Manual Driving and operating171Fault
In the event of a fault a vehicle
message is displayed in the Driver
Information Centre. Vehicle
messages  3 119.
The transmission no longer shifts
automatically. Continu

Page 174 of 327

VAUXHALL INSIGNIA 2017  Owners Manual 172Driving and operatingManual transmission
To engage reverse, with the vehicle
stationary press the release button on the selector lever and engage the
gear.
If the gear does not engage, set the
leve