2017 TOYOTA PRIUS PLUG-IN HYBRID light

1983. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■ Pop-up display
Some functions, such as the driving mode select switch and air conditioning
system, are operation-linked and display pop-up screens on the multi-infor-
mation display. If the pop-up screens of these functions are not desired, they
can be turned off in the “Meter Customize” settings. ( P. 245)
WARNING
■To prevent an accident
■ Caution for use while driving
For safety, avoid operating the meter control switch while driving as much
as possible, and do not look continuously at the multi-information display
while driving. Stop the vehicle and operate the meter control switch. Failure
to do so may cause a steering wheel operation error, resulting in an unex-
pected accident.
NOTICE
■ The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
Do not place anything or attach a sticker
in front of the instrument cluster. The item
may obscure or obstruct the display, or
could reflect off the display, possibly
causing an accident.

1993. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
3
Instrument cluster
Warning lights and indicators
The warning lights and indicators inform the driver of the status
of the vehicle’s various systems.
For the purpose of explanation, the following illustration dis-
plays all indicators and warning lights illuminated.

2003. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
Warning lightsPages
*1Brake system warning light (Red) P. 641
*1Brake system warning light (Yellow) P. 641
*1Charging system warning light P. 641
*1Low engine oil pressure warning light P. 642
*1Malfunction indicator lamp P. 642
*1SRS warning light P. 642
*1ABS warning light P. 642
*1Electric power steering system warning light
(Red/yellow) P. 642
*1, 2PCS warning light P. 643
*1Slip indicator light P. 643
*1High coolant temperature warning light P. 644
*1, 2ICS OFF indicator (if equipped) P. 644
Open door warning light P. 644
Low fuel level warning light P. 644

2013. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate a malfunction.
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Driver’s and front passenger’s seat belt
reminder lightP. 645
Rear passengers’ seat belt reminder light P. 645
*1Master warning light P. 645
*1Tire pressure warning light P. 645
Indicators
Warning lightsPages
IndicatorsPages
Turn signal indicator P. 339
Tail light indicator P. 341
Parking brake indicator P. 340
Headlight high beam indicator P. 341
Front fog light indicator P. 351
Rear fog light indicator P. 351

2023. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
Security indicator P. 75, 81
“READY” indicator P. 327
Shift position indicators P. 333
*1, 2Slip indicator light P. 492
*1, 3VSC OFF indicator P. 493
Cruise control indicator P. 407
Radar cruise control indicator P. 397
Cruise control “SET” indicator P. 397
*1, 3PCS warning light P. 372
LDA indicator P. 385
Steering control indicator P. 386
*1Adaptive High-beam System indicator P. 346
“BSM” indicator (if equipped) P. 417
Toyota parking assist-sensor indicator
(if equipped) P. 432
*1, 3ICS OFF indicator (if equipped) P. 445
IndicatorsPages

2033. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off.
*1S-IPA indicator (if equipped) P. 460
*1“PASSENGER AIR BAG” indicator P. 51
IndicatorsPages

2063. Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
WARNING
■If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional immediately if this occurs.
NOTICE
■ To prevent damage to the engine and its components
The engine may be overheating if the high coolant temperature warning
light comes on or flashes. In this case, immediately stop the vehicle in a
safe place, and check the engine after it has cooled completely. ( P. 688)

2173. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47A89E_(EE)
Press or of the meter control switches and select the icon
of the desired item.
The selected icon is highlighted and the display switches to the information
screen.
When RSA (Road Sign Assist) and speed limiter is off, the sub-screen of
the main display can also be selected. ( P. 211)
Press or of the meter control switches to switch the con-
tents of the display.
Press on screens where it
is necessary to select or con-
firm an item.
On screens with tab displays,
pressing selects the tab dis-
play, and the screen display can be
changed by pressing or of
the meter control switches.
Press to return to the previous screen.
When is selected, the following information can be displayed by
pressing or of the meter control switches.
● Energy monitor (P. 218)
● Hybrid System Indicator (P. 221)
● “Fuel Consumption Record” (P. 229)
● “Drive Monitor” (P. 232)
● “Drive Monitor 2” (P. 233)
● “Eco-Diary” (P. 234)
Basic Operations
1
2
Tab display
3
Drive information
4