2017 TOYOTA PRIUS C jump start

5188-2. Steps to take in an emergency
PRIUS c_U (OM52J11U)
If you have a set of jumper (or booster) cables and a second vehicle
with a 12-volt battery, you can jump start your vehicle by following the
steps below.
Open the hood and remove the
fuse box cover.
Push the tab in and lift the cover
off.
Open the exclusive jump start-
ing terminal cover.
Push the tab in and open the cover.
If the vehicle 12-volt battery is discharged
The following procedures may be used to start the hybrid sys-
tem if the vehicle’s 12-volt battery is discharged.
You can also call your Toyota de aler or a qualified repair shop.
1
2

5198-2. Steps to take in an emergency
8
When trouble arises
PRIUS c_U (OM52J11U)
Connect the jumper cables according to the following procedure:Connect a positive jumper cabl e clamp to the exclusive jump
starting terminal on your vehicle.
Connect the clamp on the other e nd of the positive cable to the
positive (+) battery terminal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery termi-
nal on the second vehicle.
Connect the clamp at the other end of the negative cable to a
solid, stationary, unpainted metallic point away from the exclusive
jump starting terminal and any moving parts, as shown in the
illustration.
Start the engine of the second v ehicle. Increase the engine speed
slightly and maintain that le vel for approximately 5 minutes to
recharge the 12-volt battery of your vehicle.
Vehicles with a smart key system only: Open and close any of the
doors of your vehicle with the “POWER” switch off.3
1
2
3
4
4
5

5208-2. Steps to take in an emergency
PRIUS c_U (OM52J11U)
Vehicles without a smart key system:
Maintain the engine speed of the second vehicle and start the
hybrid system of your vehicle by turning the engine switch to the
“ON” position.
Vehicles with a smart key system:
Maintain the engine speed of t he second vehicle and start the
hybrid system of your vehicle by turning the “POWER” switch to ON
mode.
Make sure the “READY” indicato r comes on. If the indicator does
not come on, contact your Toyota dealer.
Once the hybrid system has start ed, remove the jumper cables in
the exact reverse order from which they were connected.
Close the exclusive jump starting terminal cover, and reinstall the
fuse box cover to its original position.
When installing, first hook the fuse box cover onto the two rear tabs.
Once the hybrid system starts, ha ve the vehicle inspected at your
Toyota dealer as soon as possible.
6
7
8
9

5238-2. Steps to take in an emergency
8
When trouble arises
PRIUS c_U (OM52J11U)
NOTICE
■When handling jumper cables
When connecting the jumper cables, ensure that they do not become entan-
gled in the cooling fan or belt.
■ Exclusive jump starting terminal
The exclusive jump starting terminal is to be used when charging the 12-volt
battery from another vehicle in an emergency. It cannot be used to jump
start another vehicle.

586Alphabetical index
PRIUS c_U (OM52J11U)
Eco drive mode ........................ 199
Electric power steering ........... 264
Electronic keyIf the electronic key does not operate properly ........... 516
Emergency flashers Switch ................................... 466
Emergency, in case of
If a warning buzzer sounds ........................ 477, 486
If a warning light
turns on .............................. 477
If a warning message is displayed ............................ 486
If the electronic key does not operate properly ........... 516
If the hybrid system will
not start .............................. 514
If the vehicle becomes stuck ................................... 528
If the vehicle 12-volt battery is discharged .......... 518
If you have a flat tire ............ 501
If you lose your keys ............. 122
If you think something is
wrong.................................. 476
If your vehicle has to
be stopped in an
emergency.......................... 467
If your vehicle needs to
be towed ............................. 469
If your vehicle overheats ....... 524 Engine
Compartment ........................ 419
Engine switch ............... 184, 188
Hood ..................................... 416
How to start the hybrid
system ....... ................. 184, 188
Identification number ............ 533
If the hybrid system will not start .............................. 514
Ignition switch ............... 184, 188
Overheating .......................... 524
“POWER” switch................... 188
Engine coolant Capacity................................ 536
Checking............................... 423
Preparing and checking before winter ...................... 273
Engine oil Capacity................................ 535
Checking............................... 420
Preparing and checking before winter ...................... 273
Engine/power control unit
coolant Capacity................................ 536
Checking............................... 423
Preparing and checking before winter ...................... 273
Engine switch .................. 184, 188
EPS ........................................... 264
EV drive mode ......................... 195
Event data recorder................... 11
Exclusive jump starting terminal .................... 518
E