2017 TOYOTA PRIUS C light

88
PRIUS c_U (OM52J11U)
2. Instrument cluster
Warning lights and indicators
The warning lights and indicator s on the instrument cluster
inform the driver of the status of the vehicle’s various systems.
For the purpose of explanation, the following illustration dis-
plays all warning lights a nd indicators illuminated.

892. Instrument cluster
2
Instrument cluster
PRIUS c_U (OM52J11U)
Warning lights inform the driver of malfunctions in any of the vehicle's
systems.
Warning lights
*1
(U.S.A.)
Brake system warning
light ( →P. 477)*1Electric power steering
system warning light
(→P. 478)
*1
(Canada)
Brake system warning
light ( →P. 477)*1
Slip indicator ( →P. 479)
*1
(Yellow)
Brake system warning
light (→P. 477)Low fuel level warning
light (→P. 479)
*1Charging system warn-
ing light ( →P. 478)Seat belt reminder light
(→P. 479)
*1
(U.S.A.)
Malfunction indicator
lamp ( →P. 478)*1
Master warning light
(→P. 479)
*1
(Canada)
Malfunction indicator
lamp ( →P. 478)*1
Tire pressure warning
light (→P. 480)
*1
SRS warning light
(→P. 478)
*1, 2
(if equipped)
PCS warning light
(→ P. 480)
*1
(U.S.A.)
ABS warning light
(→P. 478)
(Canada)
Parking brake warning
light ( →P. 203)
*1
(Canada)
ABS warning light
(→P. 478)
(U.S.A)
Parking brake warning
light ( →P. 203)

902. Instrument cluster
PRIUS c_U (OM52J11U)
*1: These lights turn on when the engine switch is turned to the “ON” position(vehicles without a smart key system) or the “POWER” switch is turned to
ON mode (vehicles with a smart key system) to indicate that a system
check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunction in a system if the lights
do not come on, or turn off. Have the vehicle inspected by your Toyota
dealer.
*2: The light flashes to indicate a malfunction.

912. Instrument cluster
2
Instrument cluster
PRIUS c_U (OM52J11U)
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
( →P. 202)Shift position indicator
(→P. 199)
Headlight high beam
indicator ( →P. 204) “ECO MODE” indicator
(
→P. 199)
(U.S.A.)
Headlight indicator
(→P. 204)EV drive indicator lamp
(→P. 75)
(Canada)
Tail light indicator
(→P. 204)
(if equipped)
Cruise control indicator
(→P. 250)
(if equipped)
Front fog light indicator
(→P. 208)
(if equipped)
Cruise control set indica-
tor ( →P. 250)
*1
(if equipped)
Automatic High Beam
indicator ( →P. 245)*1, 2
Slip indicator ( →P. 265)
(if equipped)
Immobilizer system indi-
cator (→P. 84)*1VSC OFF indicator
(→P. 265)
(if equipped)
LDA indicator
(→P. 240)
“READY” indicator
( →P. 184, 188)
*1
(if equipped)
PCS warning light
(→P. 227)
EV drive mode indicator
( →P. 195)
SRS airbag
on-off indica-
tor ( →P. 52)*1

922. Instrument cluster
PRIUS c_U (OM52J11U)
*1: These lights turn on when the engine switch is turned to the “ON” position(vehicles without a smart key system) or the “POWER” switch is turned to
ON mode (vehicles with a smart key system) to indicate that a system
check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunction in a system if the lights
do not come on, or turn off. Have the vehicle inspected by your Toyota
dealer.
*2: The light flashes to indicate that the system is operating.
WARNING
■ If a safety system warning light does not come on
Should a safety system light such as the ABS or SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could r\
esult
in death or serious injury. Have the vehicle inspected by your Toyota dealer
immediately if this occurs.

942. Instrument cluster
PRIUS c_U (OM52J11U)
The brightness of the instrument panel lights can be adjusted by turn-
ing the dial.
Brighter
Darker
■The meters and multi-information display illuminate when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The “POWER” switch is in ON mode.
■ The brightness of the instrument panel lights
When the tail lights are turned on, the brightness will be reduced slightly
unless the control dial is turned up fully.
■ Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help
improve fuel efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even
when vehicle operation and driving conditions are the same.
■ Unit of measure of the sp eedometer (on some models)
→P. 9 9
Instrument panel light control
1
2

1082. Instrument cluster
PRIUS c_U (OM52J11U)■
Eco savings
●Fuel cost and savings should be used as a guide only.
● Depending on refueling methods, driving conditions and environmental fac-
tors, the actual and displayed fuel costs may differ.
● In some cases, fuel cost and savings may not be linked to the eco score
evaluation.
■ When disconnecting and reconnect ing 12-volt battery terminals
The following information data will be reset:
● Clock
● Past record (aside from the top 3 results)
● Average fuel consumption
● Cruising range
● Average vehicle speed
● Driving time
● EV driving rate/EV driven distance
Additionally, some displays may return to their default settings.
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
WARNING
■Eco score
Eco score should be used as a guide only. Always drive safely in accor-
dance with road and traffic conditions.
■ The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the display monitor may
respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This l ag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
■ Cautions during setting up the display
As the hybrid system needs to be running during setting up the display,
ensure that the vehicle is parked in a place with adequate ventilation. In a
closed area such as a garage, exhaust gases including harmful carbon
monoxide (CO) may collect and enter the vehicle. This may lead to death or
a serious health hazard.

1132. Instrument cluster
2
Instrument cluster
PRIUS c_U (OM52J11U)
These images are examples only, and may vary slightly from actual
conditions.
When there is no energy flow
Hybrid battery (traction battery) statusLow FullLow Full
Audio system
Multi-information
display