2017 TOYOTA MIRAI fuel

10
HYDROGEN FUEL CELL
SYSTEM & SAFETY FEATURES
*The integrated hand grip locks and
unlocks the nozzle, creating a secure
connection for safe fueling.
Seat nozzle onto receptacle fully.
Once nozzle is secure, you can follow station’s instructions to
begin dispensing fuel.
CAUTION: It is important to ensure that the nozzle lock is
properly engaged to the vehicle. Failure to do this may result in
the nozzle coming off when the flow of hydrogen begins. This
may result in damage to the nozzle, station, vehicle, your own
person or people near the fueling station.
Gently pull back on nozzle to ensure it is locked onto
receptacle.
After fueling is complete, pull the latch to unlock the hand grip
and remove the hydrogen gas nozzle.
Squeeze handle lever to lock. (To unlock nozzle, release
latch on hand grip when you are finished dispensing fuel.)
(1)
(4)
(2)
(3)
*LatchHandle lever
Seat nozzle on receptacle
WEH H70 HYDROGEN GAS NOZZLE

OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
11 *Integrated collar snaps into place
with a ‘click.’ Rotate cam lock
clockwise to secure connection for
safe fueling.
*Collar
OFF
ON
Cam Lock Handle
Seat nozzle on receptacle
Grip section
Remove nozzle
Reference
arrow Holding grip section and collar, seat nozzle onto
receptacle.
Holding grip section, pull back on collar to make
sure nozzle is securely locked. Once nozzle is
secure, you can follow station’s instructions to
begin dispensing fuel.
Make sure handle is in the OFF position.
Rotate handle clockwise to ON position to
lock nozzle.
(1)
(3)
(2)
(4)
Holding grip section, pull back on collar to
unlock and remove the fuel nozzle.
NOTE: If the nozzle cannot be removed after fueling, it may be frozen to the
vehicle. Wait for the hydrogen nozzle to thaw before attempting to remove.
Do not pull or rotate the hydrogen nozzle forcibly. Failure to follow these
precautions may cause damage.
Refer to the Refueling section in the Owner’s Manual for additional w\
arnings/notices.
After filling is complete, rotate handle
back to the OFF position.(5)(6)
WEH H35 HYDROGEN GAS NOZZLE
TIP-AFTER REFUELING

Water is a natural by-product of the fuel cell process. The system is de\
signed to
automatically purge water from the drain pipe at the rear of the vehicle\
while driving
and sometimes while it is shut off.
Water can be maually purged before parking in certain situations by pres\
sing the
“H
20” switch with the vehicle in “READY” mode. The system will reg\
ulate water
levels automatically. Drivers should typically let the vehicle handle th\
is as opposed
to using this switch.
Refer to the Owner‘s Manual for more details on this system before attempting to
use it.
12
Water release (H20) switch
HYDROGEN FUEL CELL
SYSTEM & SAFETY FEATURES

OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
13
FEATURES & OPERATIONS
Starting your vehicle
Auto lock/unlock
(1) Depress the brake pedal, and press
the “POWER” switch briefly and firmly.
(2) The “READY” light will blink. After
a few seconds, when the light remains
steady and a beep sounds, you may
begin driving.
Automatic door lock functions can be set, or turned OFF.
-Doors lock when shifting to any positions other than P.
-Doors lock when the vehicle speed is approximately 12 mph or higher.
-Doors unlock when shifting into P.
-Doors unlock when the driver’s door is opened.
Refer to the Owner’s Manual for more details.
Parking brake
P POSITION SWITCH
The shift position can be changed to P through the use of the P position\
switch.
Set: Depress
Release: Depress again
Push
(1) Fully stop the vehicle
(2) Keep depressing the brake pedal
(3) Press the P position switch.

14
FEATURES & OPERATIONS
Automatic transmission
* The engine brake is the equivalent of downshifting. Shift to “Br”\
when strong
regenerative braking is desired (i.e. downhill driving, coasting to a s\
top, etc.).
Park
Reverse
Neutral
Drive
Engine brake*
Use when a higher level of response is desired, such as when driving in \
mountainous regions or overtaking.
Push
Push
ECO Mode helps achieve low fuel consumption during trips that involve fr\
equent
accelerating and braking.
ECO MODE
POWER MODE

OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
15
Push lever to move steering wheel:
- up, down to adjust angle,
- left, right to adjust length (toward driver and away from driver.)
NOTE: Do not attempt to adjust while the vehicle is in motion.
Length
Angle
Tilt & telescopic steering wheel
Door locks
Unlock
Lock
Suitable for driving that requires strong regenerative braking, such as \
down-hill
driving, etc. To select Br mode, shift the shift lever down.
Pull
BR MODE

OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
17
Lane Departure Alert (LDA)
While driving on a road that has visible lane markers, this system is de\
signed to
recognize lane markers using a camera sensor and alerts the driver when \
the
vehicle deviates from its lane.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
Press the LDA switch (in steering wheel) to turn the LDA system ON, th\
e indicator
will illuminate. Press again to turn OFF.
When the inside of both lane lines turn white:
- Indicates that both right and left lane markers are recognized.
When the inside of either lane line turns white:
- Indicates that the lane marker on the white-marked side is recognized.\
When the inside of both lane lines are black:
- Indicates that no lane markers are recognized or the LDA system is tem\
porarily
canceled.
Camera sensor
Press to ON Multi-Information Display
TURNING THE LDA SYSTEM ON
INDICATION ON THE MULTI-INFORMATION DISPLAY (MID)

OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
19
Blind Spot Monitor (BSM) with Rear
Cross Traffic Alert (RCTA) (if equipped)
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the \
decision when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when bac\
king up)
The system uses radar sensors and is designed to detect vehicles that ar\
e traveling
in the area that is not reflected in the outside rearview mirror (the b\
lind spot). The
system advises the driver of the vehicles’ existence via the outside \
rearview mirror
indicator.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
To turn ON (activate)/OFF (deactivate) from multi-information displa\
y,
select
.
Outside rear view mirror indicators
Rear cross Traffic Alert buzzer
TURN THE BSM SYSTEM ON