1
TABLE OF CONTENTS
BUTTON OVERVIEW 2 TOUCHSCREEN 2 POWER/VOLUME 2 VOICE COMMAND 2 SETTINGS 2 PHONE 2 MEDIA 2 TUNE/SEEK 2PAIRING BLUETOOTH® PHONE FOR THE FIRST TIME 3-4SWITCHING AUDIO SOURCE - NON-NAVIGATION UNITS 5 VOICE TRAINING 5SWITCHING AUDIO SOURCE - NAVIGATION UNITS 6 SETTING HOME DESTINATION 6PRESETTING A STATION 7EQUALIZER(EQ) 7AHA® 8-9 INSTALLING THE AHA® APPLICATION 8 SWITCHING TO AHA® MODE 8 CONNECTING FOR AHA® 9 CONNECTING AN ANDROID® PHONE 9 CONNECTING AN IPHONE® 9-9
3
PAIRING BLUETOOTH® PHONE FOR THE FIRST TIME
(For both Non-Navigation and Navigation Units)
To use the hands-free system, it is necessary to pair a Bluetooth® phone
with the system. Once the phone has been paired, it is possible to use
the hands-free system. This operation cannot be performed while driving.
NOTE: The Bluetooth pairing process for Non-Navigation and Navigation units
differ, as noted below
1. Turn the Bluetooth® connection setting of your cellular phone ON.
a. Pairing is not available when Bluetooth® setting of your phone is
set to OFF.
2. Press the “Phone” button (page 2) to display the “Phone” screen.
Touch “Yes” to register a phone. (Non-Navigation units – skip to step 4)
3. Touch the “Make system discoverable”* button.
4. Next, search for “My Toyota” from your phone’s Bluetooth® screen and
select "My Toyota"
a. To cancel the registration, touch “Cancel”.
(Navigation units – skip to step 7)
* On Android® devices, you will need to make your phone visible to se\
arching devices.
Be sure to obey traffic regulations and maintain awareness of road and t\
raffic conditions at all times.
5. A message will display on the head
unit requesting messaging access.
FOR IPHONE: Using your smartphone,
you may need to allow head unit access
to your messaging and contacts.
Only current iPhone text messages can
be viewed on the head unit. iPhone does
not allow text message reply.
