2017 TOYOTA CAMRY HYBRID cruise control

3
1
9 8 6 5
4
3
2
CAMRY_HV_U (OM33C65U)
10
7
4-1. Before drivingDriving the vehicle ............. 148
Cargo and luggage............ 155
Vehicle load limits ............. 158
Trailer towing..................... 159
Dinghy towing.................... 160
4-2. Driving procedures Power (ignition) switch ...... 161
EV drive mode................... 166
Hybrid transmission........... 168
Turn signal lever................ 170
Parking brake .................... 171
4-3. Operating the lights and wipers
Headlight switch ................ 172
Automatic High Beam ....... 175
Windshield wipers and washer ............................ 180
4-4. Refueling Opening the fuel tank cap .......................... 182 4-5. Using the driving
support systems
Cruise control .................... 185
Dynamic radar cruise control.............................. 189
LDA (Lane Departure Alert)..... 202
Rear view monitor system ............................. 208
Driving assist systems ....... 218
PCS (Pre-Collision System) ........................... 224
BSM (Blind Spot Monitor)......... 231
• The Blind Spot Monitor function............. 234
• The Rear Cross Traffic Alert function ...... 236
4-6. Driving tips Hybrid vehicle driving tips ....................... 239
Winter driving tips .............. 242
4Driving

9
CAMRY_HV_U (OM33C65U)The installation of a mobile two-way radio system in your vehicle could affect
electronic systems such as:
●
Multiport fuel injection system/sequential multiport fuel injection system
● Dynamic radar cruise control system (if equipped)
● Cruise control system (if equipped)
● Anti-lock brake system
● SRS airbag system
● Seat belt pretensioner system
Be sure to check with your Toyota dealer for precautionary measures or spe-
cial instructions regarding installation of a mobile two-way radio system.
High voltage parts and cables on the hybrid vehicles emit approximately the
same amount of electromagnetic waves as the conventional gasoline pow-
ered vehicles or home electronic appliances despite of their electromagnetic
shielding.
Unwanted noise may occur in the reception of the mobile two-way radio.
Installation of a mobile two-way radio system

21Pictorial index
CAMRY_HV_U (OM33C65U)Audio remote control switches
*2. . . . . . . . . . . . . . . . . . . . . P. 252
Meter control switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 93
Telephone switches
*2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 309
Talk switch
*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 328
Vehicle-to-vehicle distance button
*1. . . . . . . . . . . . . . . . . . P. 189
Cruise control switch
Cruise control
*1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 185
Dynamic radar cruise control
*1 . . . . . . . . . . . . . . . . . . . . . . . . P. 189
Wireless charger switch
*1 . . . . . . . . . . . . . . . . . . . . . . . . . . P. 350
Eco drive mode switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 169
EV drive mode switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 166
Seat heater switches
*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 341
*1: If equipped
*2: For vehicles with a Entune Premium Audio or Entune Audio Plus, refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL”.
1
2
3
4
5
6
Type A
Type B
1
2
3
4

862. Instrument cluster
CAMRY_HV_U (OM33C65U)
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
( P. 170)
*3
“ECO MODE” indicator
(P. 169)
(U.S.A.)
Headlight indicator
(P. 172)*1, 5 Slip indicator ( P. 219)
(Canada)
Tail light indicator
(P. 172) *1VSC OFF indicator
(P. 220)
Headlight high beam
indicator ( P. 172)
*1, 6“PASS AIR BAG ON/
OFF” indicator ( P. 4 9 )
*2Automatic High Beam
indicator ( P. 175)*6Security indicator
(P. 78, 80)
*3Cruise control indicator
(P. 185) “READY” indicator
(
P. 161)
*2, 3Radar cruise control
indicator ( P. 189) EV indicator (
P. 71)
*3Cruise control set indica-
tor ( P. 185)*3EV drive mode indicator
(P. 166)
*2, 3LDA (Lane Departure
Alert) indicator
(P. 109)*3, 7
Low outside tempera-
ture indicator ( P. 88)
*1, 2, 4Pre-collision system
warning light (P. 224)

922. Instrument cluster
CAMRY_HV_U (OM33C65U)
The multi-information display presents the driver with a variety of vehi-
cle data.
● Menu icons
Displays the following informa-
tion when an icon is selected.
(P. 93)
Some of the information may be
displayed automatically
depending on the situation.
Drive information
Select to display various drive data. ( P. 94)
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio system-linked display (if equipped)
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Dynamic radar cruise control operation guide (if equipped)
Select to display operation procedures of the dynamic radar cruise
control. ( P. 189)
The tab will change to when the vehicle is in constant
speed control mode. ( P. 195)
If activated, the operational status of the LDA (Lane Departure Alert)
system will also be displayed. (If equipped) ( P. 202)
Multi-information display
Display contents

952. Instrument cluster
2
Instrument cluster
CAMRY_HV_U (OM33C65U)
*1: Can be registered to Drive information 1 through 3.
*2: Resetting procedures:• Select a function to be reset using the meter control switch and then press and hold the center button to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to the functions.
*3: With a tire inflation pressure display function
■
Changing the settings Select using the meter control switch.
Select an item and then set it with the center button.
■Customizable items
●Language
Select to change the language displayed on the multi-information
display.
● Units
Select to change the unit of measure displayed on the multi-infor-
mation display.
● Drive information 1 through 3
Select to select up to 2 items t hat will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
● EV indicator light
Select to activate/deactiva te the EV indicator light. (
P. 7 1 )
● Pop-up display
Select to set the following pop-up displays, which may appear in
some situations, on/off.
• Instrument panel brightness adjustment display
• Route guidance display of t he navigation system-linked sys-
tem (if equipped)
• Cruise control operation display (vehicles with dynamic radar cruise control)
• Incoming call display of the hands-free phone system
• Shift position display
● Accent color
Select to change the accent colors on the screen, such as the
cursor color.
Settings display
1
2

147
4Driving
CAMRY_HV_U (OM33C65U)4-1. Before driving
Driving the vehicle ............. 148
Cargo and luggage ........... 155
Vehicle load limits ............. 158
Trailer towing..................... 159
Dinghy towing ................... 160
4-2. Driving procedures Power (ignition) switch ...... 161
EV drive mode .................. 166
Hybrid transmission........... 168
Turn signal lever................ 170
Parking brake .................... 171 4-3. Operating the lights and
wipers
Headlight switch ................ 172
Automatic High Beam ....... 175
Windshield wipers and washer ............................ 180
4-4. Refueling Opening the fuel tank cap . 182
4-5. Using the driving support systems
Cruise control .................... 185
Dynamic radar cruise control .................. 189
LDA (Lane Departure Alert) .... 202
Rear view monitor system ............................ 208
Driving assist systems ...... 218
PCS (Pre-Collision System)........................... 224
BSM (Blind Spot Monitor) ........ 231
• T he Blind Spot
Monitor function ............ 234
• The Rear Cross Traffic Alert function ...... 236
4-6. Driving tips Hybrid vehicle driving tips ....................... 239
Winter driving tips ............. 242

185
4
Driving
CAMRY_HV_U (OM33C65U)
4-5. Using the driving support systems
Use the cruise control to maintain a set speed without depressing the
accelerator pedal. Display
Indicators
Set speed
Cruise control switch
Press the “ON-OFF” button to
activate the cruise control.
Cruise control indicator will be dis-
played on the multi-information dis-
play.
Press the button again to deacti-
vate the cruise control.
Accelerate or decelerate the
vehicle to the desired speed,
and push the lever down to set
the speed.
“SET” indicator and set speed will
be displayed on the multi-informa-
tion display.
The vehicle speed at the moment
the lever is released becomes the
set speed.
Cruise control
: If equipped
Summary of functions
1
2
3
4
Setting the vehicle speed
1
2