2017 TOYOTA C-HR reset

1402. Instrument cluster
C-HR_OM_Europe_OM10528E
Press on the navigation/
multimedia system.
Select “Past record”.
■Past record screen
Best recorded fuel consump-
tion
Previous fuel consumption
record
Average fuel consumption
Updating the average fuel
consumption data
Resetting the past record
data
The average fuel consumption history is divided by color into past
averages and the average fuel consumption since the last updated.
Use the displayed average fuel consumption as a reference.
These images are examples only, and may vary slightly from actual con-
ditions.
Past record
1
2
1
2
3
4
5

1412. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
■Updating the past record data
Update the average fuel consumption by selecting “Update” to measure the
current fuel consumption again.
■ Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■ Cruising range
Displays the estimated maximum distance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.

4865-3. Using the radio
C-HR_OM_Europe_OM10528E
Ty pe B
Search for desired stations by turning the tune/scroll knob or press-
ing “ ” or “” on the “SEEK TRACK” button (Type A), or the “” or
“ ” button of “SEEK TRACK” (Type B).
Press and hold a desired station selector button until you hear a
beep.
AM/FM mode button
Tune/scroll knob
Adjusting the frequency
Seeking the frequency
Station selectors
Power/volume knob
Press: Turning the audio sys-
tem on or off
Turn: Adjusting the volume
Setting station presets
1
2
3
4
5
1
2

4895-3. Using the radio
5
Audio system
C-HR_OM_Europe_OM10528E
■EON (Enhanced Other Network) system (for traffic announcement func-
tion) (Type A only)
If the RDS station (with EON data) you are listening to is not broadcasting a
traffic information program and the audio system is in the TA (traffic
announcement) mode, the radio will be switched automatically to a station
broadcasting a traffic information program in the EON AF list when traffic
information begins.
■ When the battery is disconnected
Station presets are erased.
■ Reception sensitivity
● Maintaining perfect radio reception at all times is difficult due to the continu-
ally changing position of the antenna, differences in signal strength and sur-
rounding objects, such as trains, transmitters, etc.
● The radio antenna is mounted on the rear roof.

5095-5. Using an external device
5
Audio system
C-HR_OM_Europe_OM10528E
■ iPod problems
To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner’s Man-
ual.
■ Display
 P. 496
■ Error messages
If an error message is displayed, refer to the following table and take the
appropriate measures. If the problem is not rectified, take the vehicle to any
authorized Toyota retailer or Toyota authorized repairer, or any reliable
repairer.
MessageCause/Correction procedures
“iPod error” or “ERROR”This indicates a problem in the iPod or its con-
nection.
“NO SONGS”This indicates that there is no music data in
the iPod.
“NO PLAYLIST” (Type B)This indicates that some available songs are
not found in a selected playlist.
“UPDATE YOUR iPod”
This indicates that the version of the iPod is
not compatible. Upgrade your iPod software
to the latest version.

5285-6. Using Bluetooth® devices
C-HR_OM_Europe_OM10528E
To enter a menu, press the tune/scroll knob and navigate menus by
using the knob.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Menu list of the Bluetooth® audio/phone
First menuSecond menuThird menuOperation details
“Bluetooth*”
“Pairing” - Registering a
Bluetooth® device
“List phone” -
Listing the regis-
tered cellular
phones
“List audio” -
Listing the regis-
tered portable
players
“Passkey” - Changing the
passkey
“BT power” -
Setting automatic
connection of the
device on or off
“Bluetooth* info” “Device name”
“Device address”
Displaying the
device status
“Display setting” -
Setting the auto-
matic connection
confirmation dis-
play to on or off
“Reset” or “Initialize” - Initializing the set-
tings

5365-7. “SETUP” menu
C-HR_OM_Europe_OM10528E
Select “Reset” or “Initialize” using the tune/scroll knob. (P. 528)
● Initializing the sound settings
Select “Sound Setting” using the tune/scroll knob and press
(“YES”).
For details about sound settings: P. 482
●Initializing the device information
Select “Car Device Info” using the tune/scroll knob and press
(“YES”).
Automatic connection of a portable device, automatic connection confirma-
tion display and the passkey will be initialized.
● Initializing the all settings
Select “All Initialize” using the tune/scroll knob and press
(“YES”).
Initialization

5375-7. “SETUP” menu
5
Audio system
C-HR_OM_Europe_OM10528E
Using the “SETUP” menu (“PHONE” or
“TEL” menu)
Select “Add contacts” using the tune/scroll knob. ( P. 528)
● Transferring all contacts from the cellular phone
Select “Overwrite all” using the knob and press (“YES”).
● Transferring one contact from the cellular phone
Select “Add one contact” using the knob and press
(“YES”).
Select “Add SD” using the tune/scroll knob. ( P. 528)
Select the desired data using the knob.
Press the desired preset button (from [1] to [5]).
For details about setting speed dials from the call history: P. 546
For details about deleting speed dials: P. 545
Adding a new phone number
Setting speed dials
1
2
3