2017 TOYOTA C_HR HYBRID display

981-3. Hybrid system
C-HR_HV_OM_Europe_OM10538E
NOTICE
■Hybrid battery (traction battery) air intake vent
● Make sure not to block the air intake vent with anything, such as a seat
cover, plastic cover, or luggage. The hybrid battery (traction battery) may
overheat and be damaged.
● When dust, etc., has accumulated in the air intake vent, clean it with a vac-
uum cleaner to prevent the vent from clogging.
● Do not get water or foreign materials in the air intake vent as this may
cause a short circuit and damage the hybrid battery (traction battery).
● Do not carry large amounts of water such as water cooler bottles in the
vehicle. If water spills onto the hybrid battery (traction battery), the battery
may be damaged. Have the vehicle inspected by any authorized Toyota
retailer or Toyota authorized repairer, or any reliable repairer.
● A filter is installed to the air intake vent. When the filter remains noticeably
dirty even after cleaning the air intake vent, filter cleaning or replacement
is recommended. When cleaning or replacing the filter, contact any autho-
rized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
When “Maintenance Required For Hybrid Battery Cooling Parts At Your
Dealer.” is shown on the multi-information display, the filter may be
clogged. Have the filter cleaned or replaced at any authorized Toyota
retailer or Toyota authorized repairer, or any reliable repairer.

1101-4. Theft deterrent system
C-HR_HV_OM_Europe_OM10538E
The intrusion sensor detects intruders or movement in the vehicle.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
■Setting the intrusion sensor
The intrusion sensor will be set automatically when the alarm is set.
( P. 106)
■Canceling the intrusion sensor
If you are leaving pets or other moving things inside the vehicle,
make sure to disable the intrusion sensor before setting the alarm,
as they will respond to movement inside the vehicle.
Turn the power switch off.
Press the theft sensor off
switch.
A message will be shown on
the multi-information display.
The intrusion sensor will revert
to on each time the power
switch is turned to ON mode.
Intrusion sensor (if equipped)
1
2

115
2Instrument cluster
C-HR_HV_OM_Europe_OM10538E
2. Instrument cluster
Warning lights and
indicators ......................... 116
Gauges and meters ........... 125
Multi-information
display ............................. 129
Energy monitor/
consumption screen ........ 138

1212. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10538E
*2: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the power switch is turned to ON mode, the BSM function is
enabled on the screen of the multi-information display.
• When the BSM function is enabled on the screen of the multi-
information display, the power switch is in ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by any authorized Toyota retailer
or Toyota authorized repairer, or any reliable repairer.
*3: The light flashes to indicate that the system is operating.
*4: The light turns on when the system is off.

1222. Instrument cluster
C-HR_HV_OM_Europe_OM10538E
Indicators and symbols displayed on the multi-information dis-
play
IndicatorsPages
*
Brake hold operated indicator P. 241
*
Brake hold standby indicator P. 241
LDA indicator (if equipped) P. 289
Speed limiter indicator (if equipped) P. 330
Cruise control indicator (if equipped) P. 317,
322
Cruise control “SET” indicator (if equipped) P. 317,
322
Radar cruise control indicator (if equipped) P. 307
“SPORT” indicator P. 328
“ECO MODE” indicator P. 328

1242. Instrument cluster
C-HR_HV_OM_Europe_OM10538E
Symbols on multi-information displayPages
Charging system warning light P. 595
Low engine oil pressure warning light P. 595
High engine coolant temperature warning light P. 600
LDA (Lane Departure Alert with steering control) (if
equipped)
P. 6 0 0
P. 2 8 9
Smart entry & start system P. 221
Brake Override System/Drive-Start Control P. 600
WARNING
■ If a safety system warning light does not come on
Should a safety system light such as ABS and SRS airbag warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by any authorized
Toyota retailer or Toyota authorized repairer, or any reliable repairer.

125
2
2. Instrument cluster
Instrument cluster
C-HR_HV_OM_Europe_OM10538E
Gauges and meters
The units used on the speedometer may differ depending on the tar-
get region.
Hybrid System Indicator
Displays hybrid system output or regeneration level.
Multi-information display
Presents the driver with a variety of driving-related data. ( P. 1 2 9 )
Displays warning messages in case of a malfunction. ( P. 606)
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Outside temperature display
Displays the outside temperature within the range of -40°C (-40°F) to 50°C
(122°F). Low outside temperature indicator comes on when the ambient
temperature is 3°C (37°F) or lower.
1
2
3
4
5

1262. Instrument cluster
C-HR_HV_OM_Europe_OM10538E
Odometer and trip meter display:
Displays the following items.
Odometer:
Displays the total distance the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters A and B can be used to record and display different dis-
tances independently.
Shift position and shift range display
Displays the selected shift position or selected shift range. ( P. 231)
Engine coolant temperature gauge
Displays the engine coolant temperature.
Switches the items of the odome-
ter and trip meter display by
pressing the “TRIP” switch.
When the trip meter is displayed,
pressing and holding the “TRIP”
switch will reset the trip meter.
Changing the display
6
7
8