2017 SUBARU LEGACY settings

BASIC OPERATION
58
QSAVING THE SOUND QUALITY
You can save the adjusted sound quality settings.
1.Adjust the sound quality.
2.SelectEQ1 (EQ1) or EQ2 (EQ2) for 2 seconds or
more.

” Values cannot be saved for
FLAT (FLAT).
Q USING A PRESET SOUND QUALITY
1.SelectEQ1 (EQ1) or EQ2 (EQ2) to activate the
corresponding preset sound quality.

” To reset the sound quality, select
FLAT (FLAT).

” This function can also be used at the “EQ Settings
(EQ Settings)”.
Q RESETTING THE EQ CURVE
You can return the adjusted value for the currently stored
equalizer to its initial value.
1.Select and hold FLAT (FLAT) for 2 seconds or more.

” The adjusted values for the stored
EQ1 (EQ1) and
EQ2 (EQ2) are returned to their initial values.
AUDIO SCREEN ADJUSTMENT
The screen size can be selected for each type of media.
X
USB video/SD video*
*: With navigation function
1.Select on the audio control screen.
2.SelectScreen Format (Screen Format).
3.Select the desired item to be adjusted.
No.
Function
Select to display a screen with either side in black.
Select to enlarge the image horizontally to full screen.
Select to enlarge the image by the same ratio
horizontally and vertically.

SETUP
98
SETUP
AUDIO SETTINGS
Detailed audio settings can be programmed.
1.Select.
2.SelectSETTINGS (SETTINGS).
3.SelectAudio (Audio).
4.Select the items to be set.
AUDIO SETTINGS SCREEN

SETUP
99
AUDIO
3
No.Function Page
Select to specify the sound settings. 56
Select to change the number of preset radio
stations/channels displayed on the screen. 99
Select to specify the iPod/SD*1/USB auto play
settings on/off. -
Select to specify the iPod sound signal input
settings.100
Unsupported.
-
Select to specify cover art settings on/off. -
*2Select to specify automatic sound levelizer
settings.100
Select to enable cache radio.
-
Select to reset all setup items. -
*1: With navigation function
*2 7KLVVHWWLQJFDQEHPDGHGHSHQGLQJRQWKHFRQQHFWHGDPSOL

SETUP
100
iPod SETTINGS
1.Display the “Audio Settings (Audio Settings)” screen.

:3
2.SelectiPod Sound Input (iPod Sound Input).
3.Select a screen button for the desired setting.
AUTOMATIC SOUND LEVELIZER (ASL)
The system adjusts to the optimum volume and tone quality
according to vehicle speed to compensate for increased
vehicle noise.
1.Display the “Audio Settings (Audio Settings)” screen.

:3
2.SelectAutomatic Sound Levelizer (Automatic Sound
Levelizer).
3.SelectHigh (High), Mid (Mid), Low (Low), or Off
(Off).

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 4
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
QUICK REFERENCE
The phone top screen can be used to make a phone call. To
display the hands-free operation screen, select
and
then select
PHONE (PHONE), select *, or press
the
switch on the steering wheel.
Several functions are available to operate on each screen
that is displayed by selecting the 4 tabs.
*: Without navigation function
Function Page
Phone
operation Registering/connecting Bluetooth phone 174
Calling on the Bluetooth phone
118
Receiving on the Bluetooth phone 124
Talking on the Bluetooth phone 125
Message
function Using the Bluetooth phone message
function
127
Setting up
a phone Phone settings
133
Bluetooth settings 179

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 7
PHONE
4
XMicrophone
The microphone is used when talking on the phone.
VOICE RECOGNITION SYSTEM
Press this switch to operate the voice recognition system.

” The voice recognition system and its list of
FRPPDQGVFDQEHRSHUDWHG
:3
ABOUT THE CONTACTS IN THE CONTACT
LIST

”The following data is stored for every registered
phone. When another phone is connected, the
following registered data cannot be read:
‡Contact data
‡ Call history data
‡ Speed dial data
‡ Image data
‡ All phone settings
‡ Message settings
NOTE
O When a phone’s registration is deleted, the above-mentioned
data is also deleted.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 8
WHEN SELLING OR DISPOSING OF THE
VEHICLE
A lot of personal data is registered when the hands-free
system is used. When selling or disposing of the vehicle,
LQLWLDOL]HWKHGDWD
:3
”The following data in the system can be initialized:
‡Contact data
‡ Call history data
‡ Speed dial data
‡ Image data
‡ All phone settings
‡ Message settings
NOTE
O Once initialized, the data and settings will be erased. Pay close
attention when initializing the data.
CALLING ON THE Bluetooth
PHONE
After a Bluetooth phone has been registered, a call can
be made using the hands-free system. There are several
methods by which a call can be made, as described below.
X Without navigation function
1.Select.
2.Select the desired tab to call from.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
122
WHEN THE CONTACT IS EMPTY
QFOR PBAP COMPATIBLE Bluetooth PHONES
When “Automatic Contact/History Transfer (Automatic
Contact/History Transfer)” is set to on, contacts are
WUDQVIHUUHGDXWRPDWLFDOO\
:3
Q FOR OPP COMPATIBLE Bluetooth PHONES
Contacts can be transferred or added manually.
To transfer, select
Update Contacts from Phone (Update
Contacts from Phone) at the “Contact/Call History Settings
&RQWDFW&DOO+LVWRU\6HWWLQJV