2017 SUBARU CROSSTREK light

BASIC INFORMATION BEFORE OPERATION
46
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)

”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
OTo prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
52
CHANGING BETWEEN DAY AND NIGHT
MODE
Depending on the position of the headlight switch, the
screen changes to day or night mode.
NOTE
OIf the screen is set to day mode with the headlight switch turned
on, this condition is memorized even with the engine turned off.

TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
106
”Dirt, scratches, warping, pin holes or other disc
damage could cause the player to skip or to repeat a
section of a track. (To see a pin hole, hold the disc up
to the light.)

”Remove discs from the players when not in use.
Store them in their plastic cases away from moisture,
heat and direct sunlight.
To clean a disc: Wipe it with a soft, lint-free cloth that has
been dampened with water. Wipe in a straight line from
the center to the edge of the disc (not in circles). Dry it
with another soft, lint-free cloth. Do not use a conventional
record cleaner or anti-static device.
CD-R/RW DISCS

”CD-R/CD-RW discs that have not been subject to
WKH

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 9
PHONE
4
Volume control switch

”Press the “+” side to increase the volume.

”Press the “-” side to decrease the volume.
Off hook switch
On hook switch
XMicrophone
The microphone is built into the map light slits.
VOICE RECOGNITION SYSTEM
Press this switch to operate the voice recognition system.
XTy p e A
XTy p e B

”The voice recognition system and its list of
FRPPDQGVFDQEHRSHUDWHG
:3

USEFUL INFORMATION
168 XWith navigation function
3. Check that weather information is displayed.
No. Function
Select to switch the timing of the displayed forecast.
Items such as the weather forecast, forecast
temperature or highest temperature (orange)/lowest
temperature (blue), and chance of precipitation are
displayed.
Select to display alert list.
Select to set the forecast region. Follow the steps in
“XWithout navigation function” from “STEP 4”.
Select to update the forecast location.
Select to update with the latest information.
Weather forecast icons
Display Information
noneNo Data Available
Unknown Precip
Isolated Thunderstorms
Scattered Thunderstorms
Scattered Thunderstorms (night)
Severe Thunderstorms
Thunderstorms
Rain
Light Rain
Heavy Rain
Scattered Showers
Showers

USEFUL INFORMATION
169
INFORMATION
6
Display Information
Scattered Showers (night)
Drizzle
Freezing Drizzle
Freezing Rain
Mixed Rain And Hail
Wintry Mix
Mixed Rain And Snow
Mixed Rain And Sleet
Hail
Ice Pellets
Sleet
Flurries
Light Snow
Scattered Snow Showers
Snow Showers
Display Information
Moderate Snow
Snow
Heavy Snow
Scattered Snow Showers (night)
Blowing Snow
Blizzard
Sandstorm
Blowing Dust
Dust
Foggy
Moderate Fog

USEFUL INFORMATION
170
Display Information
Light Fog
Heavy Fog
Mist
Hazy
Smoky
Blustery
Windy
Cold
Hot
Display Information
Sunny
Mostly Sunny
Clear (night)
Mostly Clear (night)
Partly cloudy
Partly cloudy (night)
Mostly cloudy
Mostly cloudy (night)
Cloudy

OTHER SETTINGS
192
CLOCK SETTINGS (WITH NAVIGATION
FUNCTION)
Used to set the auto update setting for time zones, daylight
saving time and automatic time adjustment on/off.
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Clock (Clock).
3. Select the items to be set.
No. Function
6HOHFWWRFKDQJHWKHWLPH]RQH
:3
Select to set daylight saving time on/off or to auto.
When set to auto, the daylight saving time setting
automatically turns on or off based on the current
location information.
4. Select OK (OK).
QSETTING THE TIME ZONE
1. Select Time Zone (Time Zone).
2. Select the desired time zone.
CUSTOMIZING THE SCREEN OFF IMAGES
When the screen is turned off, the desired set image
can be displayed as the screen off image. Images
can be copied from a USB memory or SD card*.
A USB memory or SD card* must be connected when
HGLWLQJVFUHHQRIILPDJHV
:3
*: With navigation function