Page 43 of 308
BASIC INFORMATION BEFORE OPERATION
41
BASIC FUNCTION
2
UNLOADING A DISC
1. Press and remove the disc.
NOTE
ODiscs can be unloaded even when the engine switch is turned
off.
CONNECTING AND
DISCONNECTING A USB MEMORY/
PORTABLE DEVICE
CONNECTING A DEVICE
The device slot is located in the center at the bottom of the
instrument panel or inside the center console box.
”Turn on the power of the device if it is not turned on.
NOTE
O & R P S D W L E O H 8 6 % P H P R U \ : 3
O & R P S D W L E O H L 3 R G : 3
OThis unit does not support commercially available USB hubs.
OBy connecting a device such as a cellular phone, charging starts
depending on the device.
Page 104 of 308
TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
102
TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
OPERATING INFORMATION
CAUTION
OTo avoid damage to the audio/visual system:
‡ Be careful not to spill beverages over the audio/visual
system.
‡ Do not put anything other than an appropriate disc into the
disc slot.
‡ Do not insert anything other than an SD card into the SD
card slot.
NOTE
OThe use of a cellular phone inside or near the vehicle may cause
a noise from the speakers of the audio/visual system which you
are listening to. However, this does not indicate a malfunction.
RADIO
Usually, a problem with radio reception does not mean there
is a problem with the radio — it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and terrain can interfere
with FM reception. Power lines or phone wires can interfere
with AM signals. And of course, radio signals have a limited
range. The farther the vehicle is from a station, the weaker
its signal will be. In addition, reception conditions change
constantly as the vehicle moves.
Here, some common reception problems that probably do
not indicate a problem with the radio are described.
Page 109 of 308
TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
107
AUDIO
3
USB MEMORY
”USB communication formats: USB 2.0 HS (480
Mbps) and FS (12 Mbps)
”File formats: FAT 16/32
”Correspondence class: Mass storage class
iPod
The following iPod®, iPod nano®, iPod classic®, iPod
touch® and iPhone® devices can be used with this system.
Made for
”iPod touch (5th generation)
”iPod touch (4th generation)
”iPod touch (3rd generation)*
”iPod touch (2nd generation)*
”iPod touch (1st generation)*
”iPod classic
”iPod with video* ”iPod nano (7th generation)
”iPod nano (6th generation)
”iPod nano (5th generation)
”iPod nano (4th generation)
”iPod nano (3rd generation)
”iPod nano (2nd generation)*
”iPod nano (1st generation)*
”iPhone 5
”iPhone 4S
”iPhone 4*
”iPhone 3GS*
”iPhone 3G*
”iPhone*
*: The voice recognition system not supported
”Depending on differences between models or
software versions etc., some models might be
incompatible with this system.
”iPod video is not supported.
”For USA customers, please visit www.subaru.com for
details. Outside of the USA customers, contact your
local dealer to arrange a demonstration in order to
F R Q
Page 117 of 308
Page 118 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 6
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
QUICK REFERENCE
The phone top screen can be used to make a phone call. To
display the hands-free operation screen, select
and
then select
PHONE (PHONE), select *, or press
the
switch on the steering wheel.
Several functions are available to operate on each screen
that is displayed by selecting the 4 tabs.
*: Without navigation function
Function Page
Phone
operationRegistering/connecting Bluetooth phone 176
Calling on the Bluetooth phone 121
Receiving on the Bluetooth phone 126
Talking on the Bluetooth phone 127
Message
functionUsing the Bluetooth phone message
function130
Setting up
a phonePhone settings 136
Bluetooth settings 181
Page 119 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 7
PHONE
4
SOME BASICS
The hands-free system enables calls to be made and
received without having to take your hands off the steering
wheel.
This system supports Bluetooth. Bluetooth is a wireless
data system that enables cellular phones to be used without
being connected by a cable or placed in a cradle.
The operating procedure of the phone is explained here.
WARNING
OWhile driving, do not use a cellular phone or connect the
Bluetooth phone.
O < R X U D X G L R X Q L W L V
Page 120 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 8
NOTE
OKeep call volume down. Otherwise, the other party’s voice
may be audible outside the vehicle and voice echo may
increase. When talking on the phone, speak clearly towards the
microphone.
OThe other party may not hear you clearly when:
‡ <00270055004c0059004c0051004a000300520051000300440051000300580051005300440059004800470003005500520044004700110003000b00300044004e004c0051004a00030048005b0046004800560056004c005900480003005700550044004900
bf0046000300510052004c005600480011000c>
‡ Driving at high speeds.
‡ Driving with a window open.
‡ When air from the ventilator blows directly toward the
microphone.
‡ The sound of the air conditioning fan is loud.
‡ There is a negative effect on sound quality due to the phone
and/or network being used.
REGISTERING/CONNECTING A Bluetooth
PHONE
To use the hands-free system for cellular phones, it is
necessary to register a cellular phone with the system.
: 3
Bluetooth PHONE CONDITION DISPLAY
The condition of the Bluetooth phone appears on the upper
U L J K W V L G H R I W K H V F U H H Q : 3
USING THE PHONE SWITCH/MICROPHONE
XSteering switch
By pressing the phone switch, a call can be received or
ended without taking your hands off the steering wheel.
”Ty p e A
”Type B
Page 121 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 9
PHONE
4
Volume control switch
”Press the “+” side to increase the volume.
”Press the “-” side to decrease the volume.
Off hook switch
On hook switch
XMicrophone
The microphone is built into the map light slits.
VOICE RECOGNITION SYSTEM
Press this switch to operate the voice recognition system.
XTy p e A
XTy p e B
”The voice recognition system and its list of
F R P P D Q G V F D Q E H R S H U D W H G : 3
