2017 Seat Ibiza display

Radio
Scan function (SCAN) When the scan function is running, all availa-
b
le stations on the current frequency band
are played in sequence for roughly 5 seconds
each.
Starting and stopping the scan function
Starting the
scan functionPress the Settings function button
and then select SCAN.
Stopping the
scan functionPress the  function button to
stop the scan function at the station
that is currently playing.
OR ELSE: Press the settings button
briefly.
Manually selecting a station with the
memory buttons or changing the
screen also stops the scan function. Traffic information (TP)
Traffic news tracking with the TP function is
on

ly possible if the TP station is available.
The traffic announcement stations are indica-
ted in the Radio main menu and in the list of
stations by means of the symbol TP ›››
Fig. 7
and ›››
Fig. 8.
Some stations that do not have their own
traffic news support the TP function by broad-
casting traffic announcements from other
stations (EON). Switching the TP function on and off
● In the menu Setup (FM, AM and
DAB), pr

ess the function button
Traffic Program (TP) to activate  or de

activate
 this function ››› page 14.
Active TP function and station selection
Traffic announcements are played in Audio
mode.
In FM mode, the station tuned in must have
the TP function. If a station is selected with-
out TP function, this will be indicated half
way up the left of the screen .
In AM mode or Media mode, the unit will al-
ways automatically tune to a traffic news sta-
tion in the background, provided there is one
available. Depending on your location, this
process can take some time.
Incoming traffic information
In active Audio mode, an incoming traffic an-
nouncement will play automatically.
During the traffic announcement, a pop-up
window is displayed and the radio changes,
depending on the case, to the traffic news
station (EON).
The media mode is paused and the volume is
adjusted to the preset level ››› page 40.
The volume of the traffic announcement can
be adjusted with the volume control. The ad- justed volume setting will be applied to sub-
sequent

announcements.
● Press the function button C
ancel to end the
c
urrent traffic announcement. The TP function
remains activated.
● OR: Pr
ess the function button Deactivate to
end the c
urrent traffic announcement and
permanently deactivate the TP function. This
can be reactivated in the setup menu.
Setup (FM, AM, DAB) FM setup
● Select the frequency band FM b
y pressing
the infotainment button RADIO .
● Press the function button Set
up to open the
menu FM setup .
Function button: function
SCAN: Scan function. When the scan function is active,
all available stations on the current frequency band are
played in sequence for approximately 5 seconds each
› ›› page 14.
Seek mode: determines the setup of the buttons with ar-
rows  and . This setting applies to all frequency
bands (FM, AM and DAB).
Preset list: All stored stations on the selected frequen-
cy band can be selected with the arrow buttons.
Station list: All available stations on the selected fre-
quency band can be selected with the arrow buttons. 14

Media
Playing order of files and folders Fig. 13
Possible structure of an audio data
s
torage device. Audio files on data media
 ar
e often organ-
ised by means of folders and  playlists ,
to determine a certain playing order.
Tracks, folders and playlists on a data medi-
um are sorted by name in alphabetic or nu-
meric order.
The diagram shows an example of a conven-
tional audio data storage device containing tracks
, f
olders  and subfolders ››› Fig. 13
that are played in the following way: 1)
Track 1 and
2 in the root directory of
the d

ata storage device
Track 3 and
4 in the fir
st folder F1 of
the root directory of the data storage de-
vice
Track 5 in the fir
st subfolder F1.1 of the
folder F1
Track 6 in the fir
st subfolder F1.1.1 of
the subfolder F1.1
Track 7 in the sec
ond subfolder F1.2 of
the folder F1
Tracks 8 and
9 in the sec
ond folder F2
Note
● The p
lay order can be modified by selecting
between the different playback modes
››› page 18.
● The playlists are not activated automatical-
ly; they
must be selected from the track se-
lection menu ››› page 20. 1.
2.
3.
4.
5.
6.
MEDIA main menu Fig. 14
MEDIA main menu. Through the main menu MEDIA y

ou can se-
lect and play different Media sources.
● Press the infotainment button MEDIA ›››
Fig. 1 t
o open the main menu MEDIA
››› Fig. 14.
It will continue playing the last media source
selected from the same point.
The media source being played is indicated
on the dropdown list when the MEDIA func-
tion button is pressed ››› Fig. 15.
If there is no Media source available, the ME-
DIA main menu is displayed. 1)
In the Media settings menu the function
, Mi
x/Repeat incl. subfolders must be activated.
18

Media
Function buttons of the main menu MediaFunction button: Function
MEDIA
Press to select another media source
› ›› page 19.
SD card
: SD memory card ››› page 21.
Bluetooth audio: Bluetooth audio
› ›› page 23.
USB
: USB data medium ›› › page 21.
AUX: external audio source ››› page 24.
SELECTIONOpens the track list ››› page 20. 
or Changes track in Media mode or fast for-
ward/rewind ›› › page 20. 
Playback will stop. The function button changes to 
› ›› page 20. 
Playback will continue. The function but-
ton  changes to  › ›› page 20.
SETUPOpens the menu Media settings
› ›› page 24. 
Repeat all tracks. Repeats all the tracks
that are on the same memory level as the
track being played at that moment. If
Mix/Repeat/Scan including subfolders is
active in the Media Settings menu , the
sub-folders will also be included. 
The current track will be repeated.

Random play. Information and possible icons
Display: Meaning
A›
›› Fig. 14
Displays track information (ID3 tag in
MP3 files).
Audio files: displays the artist's name,
album title and song title.
B› ›› Fig. 14
Playing time so far.
The time bar allows you to select the de-
sired playing time. 
RDS radio data service deactivated. The
RDS can be activated in the menu Setup
(FM, AM) › ›› page 14.
TPThe TP is active and receiving ›› › page 14. 
No traffic announcement station can be
received. Note
When the media source is inserted, playing
w
ill not start automatically; it is necessary for
the user to select the source. Nor will the me-
dia source change when it is ejected. Changing the media source
Fig. 15
Changing media source. ●
In the MEDIA m
ain menu, press the info-
tainment MEDIA button several times to skip
thr
ough the available Media sources.
● OR: In the m
ain menu, press the MEDIA
button ››› Fig. 15 and select the required me-
dia source.
In the pop-up window, the media sources not
selected are shown as deactivated (in grey).
When a media source that has already been
played is selected again, playback is re-
sumed from the point at which it was stop-
ped.
Media sources that can optionally be selec-
ted
Function button: media source
SD card: SD memory card ›› › page 21.» 19

Media
Search and press on the track/folder list or
on the de sired track/folder. If there is infor-
mation available, the track name is displayed
(for audio CDs) or the name of the file (MP3)
instead of Track + number .
Function button: Function
A››› Fig. 17Open the Source menu. Press to select oth-
er media sources.
B› ›› Fig. 18
Indicates the media source being browsed.
If pressed it goes to the root folder of the
device indicated on the icon.
SD card: SD memory card ››› page 21.
USB: USB data medium ›› › page 21.
BT audio: playing audio files via Bluetooth ®
› ›› page 23.
AUX: external audio source connected to
the AUX-IN multimedia socket ››› page 24.
C› ›› Fig. 18
Press the function button to open the top
folder in the hierarchy of the media source.
After being pressed several times the cur-
rently selected media source appears;
press to check the source contents. The
number appearing on the folder indicates
the level in the directory ›› › Fig. 18. 
Start playback with the first track.
Function button: Function 
Repeat all tracks. Repeats all the tracks that
are on the same memory level as the track
being played at that moment. If in the Me-
dia Settings menu
 Mix/Repeat
including subfolders is activa-
ted , it also includes the subfolders. 
Repeat the current track.

Random play. Includes all the tracks that
are on the same memory level as the track
being played at that moment. If in the Me-
dia Settings menu
 Mix/Repeat
including subfolders is activated, it
also includes the subfolders. Note
The tracks, folders and playlists can also be
sel
ected by turning the right-hand setup but-
ton, and can be played or opened by pressing
it. Inserting and removing memory cards
Inserting a memory card
In

sert a compatible memory card into the
memory card slot with the bevelled edge first
and facing right until the card clicks into
place ››› Fig. 1 9 .
If

a memory card cannot be inserted, make
sure it is positioned correctly and is compati-
ble with the unit. Removing a memory card
The in

serted memory card must be prepared
for removal.
● In the Media main menu, press the
S

ETTINGS button to open the Media Set-
tings menu. A
lternatively: Press the MENU infotainment button; then press
Set
up to
open the System settings menu.
● Press the function button
R

emove SD card safely . After the system closes
the memor
y card, a message will appear on
the screen indicating that the card can be re-
moved.
● Press the inserted memory card. The mem-
or
y card “jumps” to the eject position.
● Remove the memory card.
Unr
eadable memory card
If a memory card is inserted and the data
cannot be read, the relevant warning ap-
pears.
External data storage device connec-
t
ed to USB port  Depending on the features and the country,
the

vehicle may have a USB connection. For
their location, consult the ››› Booklet Instruc-
tion Manual. »
21

Media
Audio files on an external data storage de-
v ice connected to the USB port  can be
played and controlled via the Infotainment
system.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio
files, such as MP3 players, iPods™ and USB
sticks.
Only supported audio files are displayed and
played. Other files are ignored.
Further operation of the external data medi-
um (changing track, selecting tracks and
playback modes) is described in the appro-
priate chapters of this manual ››› page 17.
Instructions and restrictions
Compatibility with Apple™ devices and other
media players depends on the unit.
The USB port  supplies the usual USB volt-
age of 5 volts for a USB connection.
External hard disks with a capacity greater
than 32 GB must be reformatted for the
FAT32 file system in some circumstances. You
will find the necessary software and informa-
tion on the Internet. Take into account all other instructions and
limit
ations regarding requirements for media
sources ››› page 17.
iPod™, iPad™ and iPhone™
Depending on the country and the equip-
ment, iPods™, iPads™ or iPhones™ can be
connected using the device's USB cable to
the USB port  of the vehicle and used as
audio sources.
After connecting an iPod™, iPad™ or
iPhone™, the specific list views of the iPod
are displayed in the upper selection level
(  Playlists ,  Artists ,  Albums ,
 Tracks ,  Podcasts etc.).
Possible error messages after connecting an
external data storage device 1)
The device is not compatible
CauseProcedure
The external data carri-
er cannot be played or
communication is not
possible with the
adapter cable being
used.Check the connection and
make sure the external data
storage device is working cor-
rectly.
If possible, update the exter-
nal data storage device soft-
ware.
The device does not work
CauseProcedure
Communication fault.Check the connection and
make sure the external data
medium is working correctly. Disconnecting
An

y connected data storage devices must be
prepared before their disconnection in order
to remove them.
● In the Media main menu, press the
S

ETTINGS button to open the
Media Set-
tings menu.
● Press the Saf
ely remove USB device func-
tion button. After the system has closed the
USB device, a message will appear on the
screen indicating that the device can be re-
moved.
● Now the data storage device can be discon-
nect
ed. Note
● Do not
connect an external media player at
the same time to play music via Bluetooth ®1)
Due to the large number of different data storage
dev
ices and various iPod™, iPad™ and iPhone™
generations available, it is not possible to guarantee
fault-free operation of all functions described here.
22

Telephone management system (PHONE)*
For your safety, we recommend you make the
link when the vehicle is stationary. In some
countries it is not possible to perform the
pairing with the vehicle running.
Conditions
You must guarantee the following setup in
the mobile phone and the Infotainment sys-
tem:
● The ignition must be switched on.
● The Bluet
ooth ®
function of the mobile tele-
phone and the Infotainment system must be
active as well as visibility.
● The k
eypad lock on the mobile telephone
must be deactivated.
Follow instructions in the manual for the mo-
bile telephone.
After turning on the ignition, the visibility of
the Bluetooth ®
function activates.
During the pairing process it is necessary to
enter data via the mobile telephone's key-
pad. To do so, the mobile telephone must be
ready.
Starting mobile telephone pairing
● Make sure the Bluetooth function of the
mo
bile device is active and visible.
● Press the PHONE button on the Infotain-
ment

system.
● Press the Find t
elephone function button.OR:
● Press the PHONE button on the Infotain-
ment

system.
● Press the Set
up function button.
● Press the Sel
ect telephone function button
and then Find .
OR:
● Press the PHONE unit button of the Infotain-
ment

system.
● Press the Set
up function button.
● Press the Bluet
ooth function button.
● Press the Find dev
ices function button.
OR:
● Connect from the mobile device itself.
The n
ame of the Bluetooth function of your
Infotainment system will be displayed in Setup >
Bluet
ooth >
Name
› ›› page 33.
The search process can take up to 1 minute.
On the screen the system will dynamically
update the names of the Bluetooth devices
found.
As soon as the search is completed, the
names of the Bluetooth ®
devices found are
displayed on-screen.
● In the Infotainment system select the mo-
b

ile telephone to which you want to connect
from the list of Bluetooth devices found. In
certain circumstances, it is possible that to finish the connection between the two devi-
c
es, you must enter additional data in the
mobile telephone and Infotainment system.
● If necessary, confirm the link to the mobile
t

elephone.
● Use your mobile telephone to enter and
c

onfirm your PIN code, as indicated in the
display of the infotainment system.
OR:
● Compare the PIN code shown on the dis-
p

lay of the Infotainment system with that
shown on the mobile telephone. If they
match, confirm on both devices.
The infotainment system and the mobile tele-
phone will now be connected to each other.
When the pairing has been finalized correct-
ly, the PHONE main menu will appear. The
phonebook and call lists stored in the mobile
phone will be loaded once the requests have
been accepted in the mobile phone. The du-
ration of the loading process depends on the
amount of data stored on the mobile tele-
phone. After loading, the data will be availa-
ble on the Infotainment system.
Pairing and connection of mobile telephones
You can pair up to 20 mobile telephones to
the Infotainment system, but only one mobile
telephone can be connected as hands-free,
and this or another device as a Bluetooth au-
dio profile. »
27

Telephone management system (PHONE)*
update of the phonebook data can be initi-
at ed from the User profile settings
menu ››› page 33.
Telephone management can store a maxi-
mum of 4 user profiles for mobile tele-
phones. If you wish to link/connect another
mobile phone, the oldest user profile will au-
tomatically be replaced.
Telephone management system function but-
tons
● Press the PHONE button on the Infotain-
ment

system to open the PHONE main menu.
Function button: function ›› › Fig. 19
AName of connected mobile telephone.
Press on the name to access the Select
telephone menu.
BButtons for calling favourite contacts or
phonebook shortcut keys, depending on
the View › ›› page 32. 
and Shortcut keys scroll arrows. Allows you to
move between the various speed di-
al/phonebook shortcut banks.
DIAL NO.To open the number pad and enter a tele-
phone number ››› page 30.
CONTACTSTo open the phonebook of the connected
mobile telephone ›› › page 31.
Function button: function ›› › Fig. 19
VIEWAllows you to choose between the dis-
play of speed dial and phonebook short-
cut keys ››› page 32.
CALLSTo open call lists of the connected mobile
telephone ›› › page 31.
SETUPTo open the Telephone settings
menu ››› page 33. WARNING
Remember that the driver must not operate
the mo
bile telephone while driving. Display and symbols of the telephone
m
anagement system Fig. 20
Active call. Fig. 21
Handling of multiple calls.
Display: Meaning ››› Fig. 20
AName of the mobile network operator (provid-
er) to which the mobile telephone is connec-
ted.
BView of stored telephone number or name
› ›› page 33. 
Press to
accept a call. 
Press to
end a call.
OR: Press to reject an incoming call. 
Press to mute the call signal during a call and
to reactivate it. 
Press to mute the microphone during an active
call and to reactivate it. 
Charge status of a mobile telephone connec-
ted via “Hands-free profile” (HFP) Bluetooth ®
. 
Strength of coverage signal received by the
mobile telephone.» 29

Telephone management system (PHONE)*
Phonebook Menu (contacts) Fig. 23
Contacts Menu. Fig. 24
Search window. As soon as the first pairing is performed, it
m
ay take some time for the phonebook 1)
da-
ta from the paired mobile telephone to be
available on the Infotainment system. De- pending on the volume of data to be transfer-
r

ed, the process can take several minutes. It
may be necessary to confirm the data transfer
on the mobile telephone.
The phonebook can also be opened during a
telephone call.
In the PHONE main menu, press the Contacts function button to access the phonebook.
Possible functions
Select a con-
tact from the
list
Search the list and press on the icon to the right of the desired con-
tact in order to initiate a call.
OR: If the contact has several tele-
phone numbers, first press the con-
tact and then the number to be used
to make the call. To edit the number
before calling, press
.
Searching for a
contact in the
search window
Press the Search
› ›› Fig. 23 function
button to open the search window.
Enter the name to be searched for in
the window ››› Fig. 24.
The number of matching results is
displayed on the left hand side under
the input field. Press the OK button to
change to the list.
Search the list and press the desired
contact to make the call. Note
If you edit the number before calling, this will
on
ly be used for the call and will not be stor-
ed in the phonebook. Call Menu (call lists)
Fig. 25
Call lists menu. ●
In the PHONE m
ain menu, press the Call list function button.
● Press the FIL
TER function button.
● Select the desired call list: A
ll ,
Mi ssed ,
Di
alled or
R eceived .
If
a phone number has been stored in the
phonebook, the call list will display the name
stored instead of the number. »1)
Depending on the device, only the contacts from
the t
elephone memory are loaded. 31