2.5
MAP (4/4)
For safety reasons, carry
out these operations when
the vehicle is stationary.
– “Place markers”.Select which places to show on the
map while navigating. Too many
markers make the map crowded,
so it is better to keep as few as
possible.
Select “Show all/Hide all” to dis-
play or hide all locations catego-
ries;
Press the location category name
to open a list of subcategories.
Check or uncheck the checkbox
next to a category to display or
hide it.
“Where Am I?”
This function shows detailed informa-
tion about the current position: coor-
dinates and address.
“GPS status”
This function allows you to get infor-
mation about the GPS signal status
of your vehicle. “Stop guidance”
Press this control to cancel the active
route.
Pop-up menu: with action on the
map
Slide your finger on the touchscreen
to move around the map and so
have access to other functions of the
pop-up menu:
– “Traffic map”;
– “Places around cursor”;
– “Add to address book”;
– “Information”;
– “Show cursor position”.
“Traffic map”
Select the “Traffic map” to view the
current status of traffic on the map.
“Places around cursor”
This function enables you to find
points of interest around the selected
position. You can search, filter, sort
and view all the results found by the
multimedia system on the map.“Add to address book”
This function allows you to save the
selected position in the address book.
“Information”
This function enables you to fund de-
tails (address, latitude and longitude)
on the selected position.
“Show cursor position”
This function allows you to return to
the position of the cursor when you
move around the guidance map.
2.8
“Points of interest”
A point of interest (POI) is a serv-
ice, establishment or even a tour-
ist area close to a location (start
point, destination city, en route,
etc.).
Points of Interest are listed by cat-
egory: restaurants, museums, car
parks, etc.
Select “Destination” from the
“Navigation” menu, then “Points
of interest” to select a destination
from the points of interest.
“Name search”
A list is displayed in which you can consult all POIs found
along the route (if there are
any) or around your current po-
sition. You can filter the list of
POIs using the keypad. Select
a POI from the list of results or
enter the name/type of POI that
you want to look for using the
keypad.
ENTERING A DESTINATION (3/7)
For safety reasons, carry
out these operations when
the vehicle is stationary.
“Location search”
This function enables you to search for POIs in a town/city
or along a route, by selecting a
point of interest from a list or by
typing it using the keypad.
Select the search area from among the following catego-
ries:
– “In a city”;
– “Nearby”;
– “Along Route” (if any);
– “Near destination” (if any).
After selecting a search area, the screen displays the POIs
available by category (All,
Airport, Automobile, etc.).
Select a category.
All POIs in this category are displayed in a search area.
Select the desired POI to start
guidance. Categories
(service station/car park/restau-
rant/accommodation)
Search for points of interest by
selecting categories from the
“Points of interest” menu.
On this screen, you can launch a quick search using four types
of preset POIs:
– “Petrol Station” along a route, if there are any.
– “Parking” near the destina- tion, if there are any.
– “Restaurant” along a route, if there are any.
– “Accommodation” near the destination, if there are any.
If you currently do not have a route or destination, these
POIs are searched around your
current or last known position.
2.10
ENTERING A DESTINATION (5/7)
Confirming the destination
Once your destination information has
been entered, the system displays a
route summary for confirmation. Press
Select at the bottom of the screen to
confirm. The system will make the cal-
culation.
Note: The calculation criteria can be
modified in the route settings.
At the end of the calculation, the system
displays a navigation summary.
Note: if you do not touch the screen,
this page will close after ten seconds
and guidance will start automatically
if there is no restriction affecting your
journey.
To confirm your destination and acti-
vate guidance, press button Go.
On mapSelect
2
For safety reasons, carry
out these operations when
the vehicle is stationary.
Move around the map to position
the cursor on your destination,
then confirm by pressing “Select”:
the system calculates the route.
Pop-up menu 2
Select a destination as described
previously and then press 2 to
access the following functions:
– “Places around the cursor”;
– “Add to address book”;
– “Information”. “Places around cursor”
This function enables you to find
points of interest around the se-
lected position. You can search,
filter, sort and view all the results
found by the system on the map.
“Add to address book”
This function allows you to save
the selected position in the ad-
dress book.
“Information”
This function enables you to fund
details (address, latitude and lon-
gitude) on the selected position.
