47
Adjusting the height of the
head restraint
The headrest has a frame with notches
which prevents it from lowering; this is a
safety device in case of impact.
The adjustment is correct when the
upper edge of the headrest is level with
the top of the head.
Never drive with the head restraints
removed; they must be fitted and correctly
adjusted.
F
T
o raise a headrest, pull it upwards.
F
T
o remove it, press the lug A and pull
upwards.
F
T
o put the headrest back in place, engage
the headrest rods in the openings keeping
them in line with the seat backrest.
F
T
o lower the headrest, press the lug A and
push down on the headrest at the same
time.
Heated seat control
Press the switch.
The temperature is controlled automatically.
Pressing a second time stops operation.
3
Ease of use and comfort
49
Returning the backrest to the normal position
F Straighten the seat back 2 and secure it.
F U nbuckle and reposition the seat belt on
the side of the backrest.
When repositioning the seat backrest,
take care not to trap the seat belts.
Ensure that the backrest has latched
properly into place.
Adjustable head restraints
These have one position for use (up) and a
stowed position (down).
They can be removed and are interchangeable
side to side.
To remove a headrest:
F
P
ull the headrest upwards to the stop.
F
P
ress on lug A .
Never drive with the headrests removed;
they must be fitted and correctly adjusted.
3
Ease of use and comfort
96
Advice
The incorrect installation of a child seat in a
vehicle compromises the child's protection in
the event of an accident.
Ensure that there is no seat belt or seat belt
buckle under the child seat, as this could
destabilise it.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack
relative to the child's body to a minimum,
even for short journeys.
When installing a child seat using the seat
belt, ensure that the seat belt is tightened
correctly on the child seat and that it secures
the child seat firmly on the seat of your
vehicle. If your passenger seat is adjustable,
move it for wards if necessary.
At rear seating positions, always leave
sufficient space between the front seat and:
-
a r
ear ward facing child seat,
-
t
he child's feet for a child seat fitted
forward facing.
To do this, move the front seat for wards
and, if necessary, move its backrest into the
upright position. For optimal installation of the forward-facing
child seat, verify that its backrest is as close
as possible to the backrest of the vehicle
seat, or if possible in contact with it.
The head restraint must be removed before
installing a child seat with a backrest on the
passenger seat.
Ensure that the headrest is stowed or
attached securely so that it is not thrown
around the vehicle in the event of sharp
braking. Refit the head restraint once the
child seat has been removed.
Children in front
The legislation on carrying children on the
front passenger seat is specific to each
country. Consult the legislation in force in
your country.
Deactivate the passenger's front airbag
when a rear ward facing child seat is installed
on the front passenger seat.
Otherwise, the child risks being seriously
injured or killed if the airbag is deployed.
Installing a booster seat
The chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
PEUGEOT
recommends using a booster seat
with a backrest equipped with a belt guide at
shoulder level.
As a safety precaution, do not leave:
-
a c
hild or children alone and
unsupervised in a vehicle,
-
a c
hild or an animal in a vehicle which
is exposed to the sun, with the windows
closed,
-
t
he keys within reach of children inside
the vehicle.
To prevent accidental opening of the doors
and rear windows, use the child lock.
Take care not to open the rear windows by
more than one third.
To protect young children from the rays of
the sun, fit side blinds on the rear windows.
Safety
