2017 PEUGEOT 3008 ESP

13
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Displays
Permanent information
Whatever the display mode selected, the
instrument panel displays:
-
i
n fixed locations:
●

g
earbox and gear shift indicator
information,
●

t
he fuel gauge,
●
t

he engine coolant temperature indicator,
●

t
he distance recorders.
-

i
n variable locations:
●

t
he digital speedometer,
●

s
tatus or alert messages displayed
temporarily.
Most warning and indicator lamps do not have
a fixed position.
The warning and indicator lamps in the second
line are displayed from right to left in order of
priority.
For certain functions that have indicator lamps
for both operation and for deactivation, there is
only one dedicated location.
Personalisation of the
instrument panel
You can modify the appearance of the
instrument panel, by choosing:
-

a d
isplay colour**,
-

a d
isplay mode.
Display language
This depends on the language selected
in the screen configuration menu.
Choosing a display colour
This depends on the colour scheme activated
by the i- Cockpit Amplify function:
F "Relax ": grey,
F
"Boost ": red,
F
"Normal " (no colour scheme activated):
blue.
For more information on the i-Cockpit Amplify
function , refer to the corresponding section.
** Versions with touch screen.
Optional information
Depending on the display mode selected and
the systems activated, the following information
may appear:
-
t
he rev counter,
-

t
he trip computer,
-

d
riving aids,
-

t
he speed limiter or cruise control,
-

t
he media currently playing,
-
n

avigation instructions,
-

e
ngine information from the Dynamic Pack.
1
Instruments

14
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Choice of display mode
To modify the display mode of the instrument
panel:
F
t
urn the thumbwheel on the left of the
steering wheel to display and run through
the different modes in the right hand part of
the instrument panel,
F

o
nce the desired display mode appears,
press the thumbwheel to confirm.
The new display mode is applied immediately. Each mode corresponds to the type of
information displayed in the instrument panel.
-

"
DIALS": standard display of the analogue
and digital speedometers, rev counter, fuel
gauge, coolant temperature indicator and
distance recorders.
-
"
NAVIGATION": standard display with in
addition information related to the current
route navigation (map and instructions).
-
"
DRIVING": standard display with in
addition information related to the driving
assistance system in use.
* Versions with monochrome screen.
** Versions with touch screen. -
"
MINIMAL": reduced display with the digital
speedometer and the distance recorders
and, in the event of an alert only, fuel
gauge and coolant temperature indicator.
-
"
TRIP COMPUTER"*: minimal display with
in addition the rev counter, instantaneous
information and the trip recorder selected
(1 or 2).
or
- " PERSONAL"**: minimal display with in
addition the selection made in the touch
screen of the type of information displayed
in the personalisable areas on the left and
right.
Instruments

15
3008-2_en_Chap01_instruments-de-bord_ed01-2016
To enter settings for the "PERSONAL"
display mode and select the information to be
displayed in the personalisable areas of the
instrument panel:F

s
elect the Settings menu in the
upper bar of the touch screen,
F

p
ress the "Perso" button, F
f or each personalised area, left and right,
select a type of information using the
corresponding scroll arrows in the touch
screen:
●

"D

riving aids",
●

"D

efault" (empt y),
●

"En

gine info" (Dynamic Pack),
●

"G

-meters" (Dynamic Pack),
●

"T

emperatures" (engine oil),
●

"M

edia",
●

"N

avigation",
●

"T

rip computer",
●

"R

ev counter". F
a n ominal preview appears alongside the
corresponding arrows,
F

c
onfirm to save and quit.
If the current display mode is "PERSONAL", the
new selection is displayed immediately.
F

s
elect " Configuration ",
As a safety measure, these adjustments should
be carried out with the vehicle stationary.
1
Instruments

16
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Indicator and warning lamps
When the ignition is switched on
Certain warning lamps come on in the
instrument panel for a few seconds when the
ignition is switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.Certain warning lamps may come on in
one of two modes: fixed (continuous) or
flashing.
Only by relating the type of illumination
to the operation of the vehicle can it
be determined whether the situation is
normal or a fault has occurred.
For more information, refer to the
corresponding tables of warning and
indicator lamps.
Associated warnings
The illumination of most of these warning lamps
is accompanied by the display of a message
and an audible signal.
Instruments

17
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Warning / indicator lampStateCause Action / Observations
Left-hand
direction indicatorflashing with buzzer.The lighting stalk has been pushed
down.
Right-hand
direction indicator flashing with buzzer.
The lighting stalk has been pushed
up.
Hazard warning
lamps flashing with audible
signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction indicators and
their associated indicator lamps flash simultaneously.
Sidelamps fixed. The lighting stalk is in the
"Sidelamps" position.
Dipped beam
headlamps fixed.
The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam
headlamps fixed.
The lighting stalk has been pulled
towards you. Pull the stalk to return to dipped beam headlamps.
+
or Automatic
headlamp
dipping
fixed.
The function has been activated
via the Driving menu of the touch
screen.
The lighting stalk is in the "AUTO"
position. The camera, located at the top of the windscreen,
manages the illumination of main or dipped beam,
depending on the exterior lighting and the driving
conditions.
For more information on Automatic headlamp
dipping
, refer to the corresponding section.
Operation indicator lamps
For more information on the Lighting control stalk , refer to the corresponding section.
If one or more of the following indicator lamps come on, this confirms that the corresponding system has been switched on.
1
Instruments

18
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Warning / indicator lampStateCause Action / Observations
Diesel engine
pre-heating fixed.
When the ignition is switched on
with a key in the ignition switch or
a starting instruction made using
the
"START/STOP " button, the
engine temperature makes engine
pre-heating necessary. The period of illumination of the indicator lamp is
determined by the ambient conditions (up to about
thirty seconds in severe winter conditions).
With an ignition switch and key, wait until the indicator
lamp goes off before starting.
With Keyless Entry and Starting, once it goes off,
starting is immediate, on condition that the brake
pedal remains pressed with an automatic gearbox, or
the clutch pedal is pressed fully down with a manual
gearbox.
If the engine does not start, switch the ignition off and
then on, wait until the indicator lamp goes off again,
then start the engine.
Stop & Star t fixed. When the vehicle stops (red lights, traffic
jams,
...) the Stop & Start system has put
the engine into STOP mode. The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want
to move off.
flashes for a few
seconds, then goes
of f. STOP mode is temporarily
unavailable,
or
START mode is invoked
automatically. For more information on Stop & Star t
, refer to the
corresponding section.
Rear foglamps
fixed. The rear foglamps have been
switched on using the ring on the
lighting control stalk. Turn the ring on the lighting control stalk rear wards to
switch off the rear foglamps.
Front foglamps fixed. The front foglamps are switched on
using the ring on the lighting control
stalk. Turn the ring on the lighting control stalk rear ward
twice to switch off the front foglamps.
Instruments

19
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Warning / indicator lampStateCause Action / Observations
Passenger's
airbag system fixed in the seat belt
and passenger's front
airbag warning lamps
display. The control switch, located in the
glove box, has been placed in the
"ON"
position.
The passenger's front airbag is
activated. In this case, do not install a rear ward facing child seat
on this seat.
Move the control switch to the "OFF"
position to
deactivate the passenger's front airbag. In this case,
you can install a rear ward facing child seat, unless
there is a fault with the airbags (airbag warning
lamp


on).
Deactivation of
the automatic
functions of the
electric parking
brake
fixed.
The "automatic application" (on
switching off the engine) and
"automatic release" functions are
deactivated or faulty. Activate the function again or contact a PEUGEOT
dealer or a qualified workshop in the event of a fault.
For more information on the Electric parking brake
,
refer to the corresponding section.
Electric parking
brake
fixed.
The electric parking brake is applied. Release the parking brake to switch off the warning
lamp: with your foot on the brake pedal, briefly push
the parking brake control lever.
Observe the safety recommendations.
For more information on the Electric parking brake ,
refer to the corresponding section.
1
Instruments

20
3008-2_en_Chap01_instruments-de-bord_ed01-2016
Warning / indicator lampStateCause Action / Observations
Hill Assist
Descent Control fixed.
The system has been activated, but
is paused because the speed is too
high. Between 18 and 30 mph (30 and 50 km/h), the system
is paused.
Reduce the speed of the vehicle.
fixed. The system has been activated, but
the conditions for regulation are not
met (gradient, gear engaged).
flashing. The system is regulating the speed of
the vehicle. The vehicle is being braked; the brake lamps come on
during the descent.
For more information on the Hill Assist Descent
Control
system, refer to the corresponding section.
Blind Spot
Monitoring
System fixed.
The system has been activated. For more information on the Blind Spot Monitoring
System, refer to the corresponding section.
Automatic
wiping fixed.
The wiper control stalk has been
pushed down.
Automatic front wiping is activated. To deactivate automatic wiping, push the wiper control
stalk down again or put the wiper control stalk in
another position.
Instruments