2017 Peugeot 208 technical data

190
Engines and towed loads – LPG
Engine1.2 PureTech 82 LPG
Gearboxes Manual 5-speed
(BVM5)
Code KQ5 (EB2F MA LPG)
Model codes HMX5/GPL
Cubic capacity (cm
3) 1,1 9 9
Max. power: EU standard (kW) 60
Fuel Dual fuel petrol/LPG
Braked trailer (within the GTW limit) on a 10 or 12% slope (kg) 720
Unbraked trailer (kg) 520
Recommended nose weight (kg) 46
Technical data

191
Dimensions (in mm)
These dimensions have been measured on an unladen vehicle.3-door 5-door
9
Technical data

192
Commercial version
Number of seats: 2 people.
Effective boot volume: 1.062 m3
Effective floor length: 1.335 m.
E ffective width for wheel arches: 1.042 m.
Effective width in the centre: 1.061
m.
Effective height in the centre: 0.857
m.
Identification markings
Different visible markings for the identification
and localisation of your vehicle.
A.Vehicle Identification Number (VIN)
under the bonnet.
This number is engraved on the bodywork
near the suspension damper mounting.
B. Vehicle identification number (VIN), on
the dashboard.
This number is recorded on a label, visible
through the windscreen.
3-door 5-door
C.
Manufacturer's label.
This tamper proof label is affixed to the
front pillar, driver’s side.
Technical data

193
It bears the following information:
- t he name of the manufacturer,
-

t
he European Whole Vehicle Type Approval
number,
-

t
he vehicle identification number (VIN),
-

t
he maximum authorised vehicle weight (the
Gross Vehicle Weight or GV W),
-

t
he maximum authorised vehicle + trailer
weight (the Gross Train Weight or GTW),
-

t
he maximum weight on the front axle,
-

t
he maximum weight on the rear axle.
D. Tyre/paint label.
This label is affixed to the centre pillar on the
driver’s side.
It bears the following information on the tyres:
-

t
he tyre inflation pressures with and without
load,
-

t
he tyre specification, made up of the
dimensions and type as well as the load and
speed indices,
-

t
he spare tyre pressure.
It also indicates the paint colour code. The vehicle may be originally equipped
with tyres with higher load and speed
indices than those indicated on the label,
without affecting inflation pressure.
Checking tyre pressures
The tyre pressures should be checked when
cold at least monthly.
The pressures given on the label are valid for
cold tyres. If you have driven for more than
10
minutes or more than 6 miles (10 kilometres)
at more than 30
mph (50 km/h), the tyres will be
warm; in this case 0.3
bar (30 kPa) should be
added to the pressures given on the label.
Never reduce the pressure of a warm tyre.
Low tyre pressures increase fuel
consumption.
9
Technical data