2017 NISSAN X-TRAIL wheel


> (GLW    0RGHO 7$@
*
2
Setting thetarget parking position and
starting theoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1015X
1. Slowly movethevehicle forward andstop
approximately 1m (3 ft)beside theparking space.
Adjust thetarget parking rectangle (blue)position
by touching
.
NO TE:
.
Use theturn signal switch toselect a
preferred sideforparking.
.
The target parking rectangle needstobe
positioned neartheactual parking space
before fineadjustments canbemade by
touching
. The instructions forvehicle
movement duringtheadjustment areas
follows.
Ð Check theposition ofthe lines and
rectangles withtheactual parking space
on the screen whilethevehicle isnot in
motion.
Ð Move thevehicle atalow speed while
checking thesurroundings forsafety with
your owneyes. Ð
Stop thevehicle againtomake sure
that thevehicle position isin the right
place.
.
Make surethatanyobjects arelocated
outside theclearance guidelines (red).
Otherwise, thevehicle mayhitthe objects
during themaneuvers. Refertothe fol-
lowing examples.
Example ofperpendicular
parking:
JVH0719X
*
1
: Good example
*
2
: Bad example
2. Touch theªStartº keyonthe screen.
The PA operation canbestarted whenthe
following conditions aremet.
.
The vehicle iscompletely stopped.
.
The steering wheelisin the straight position.
.
The shift lever isin the positions forforward
movement, suchasªDº (Drive) position (CVT
model) orª1º (1st) position (MTmodel) .
*
3
Moving thevehicle forward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1019X
. Gently placehands onthe steering wheel(the
steering wheelwillbeoperated automatically) and
slowly movethevehicle forward tothe reverse
starting position rectangle (green)bymoderating
the amount ofpressure youapply tothe brake.
. Stop thevehicle completely whenthevehicle
reaches thereverse starting position rectangle
(green) .
. Depress thebrake pedal andstop thevehicle
completely whenitapproaches anothervehicleor
object, orwhen thevehicle reaches thereverse
starting position.
NO TE:
A warning chimewillsound whenthevehicle
speed exceeds thespeed limitforthe PA
operation.
Display screen,heaterandairconditioner ,and audio system
4-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-22
Display screen,heaterandaircondition er,and audio system
*
4
Moving thevehicle backward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1020X
. Place theshift lever inthe ªRº (Reverse) position.
. Gently placehands onthe steering wheel(the
steering wheelwillbeoperated automatically) and
slowly movethevehicle inreverse intotheparking
space bymoderating theamount ofpressure you
apply tothe brake.
*
5
Finishing theparking operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thevehicle ispositioned inthe parking space,
depress onthe brake andstop thevehicle. Touch the
ªCancelº keytoterminate thePA system.
NO TE:
. Make anynecessary adjustments manually
and make turnsinreverse asrequired.
Depending onthe situation, shiftlever
operations mayberequired severaltimes
for maneuvering thevehicle intotheparking
space.
. Ifthe vehicle reaches theapproximate area
of the target parking space,achime will
sound. Amessage indicating thatthePA
operation isending willappear onthe
display andthesystem willterminate auto-
matically. Adjusting
thetarget parking position:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1025X
When setting atarget parking position, youcan make a
fine adjustment ofthe target parking rectangle (blue)
position.
1. Touch
on the screen.
At parking lotswith parking linesonthe ground,
the PA system willsearch forthe lines andmake
fine adjustments automatically .
2. Touch thearrow onthe screen forfine adjust-
ments ofthe target parking rectangle (blue)
position.
Fine adjustments mayberequired atparking lots
without parking linesorwhen theautomatic fine
adjustments usingtheparking linesdonot work.
Make surethatanyobjects arelocated outsidethe
clearance guidelines (red).
Operating tips:
. When thetarget parking rectangle (blue)doesnot
fit inthe actual parking spacefollowing thecorrect
procedure, checkthesurroundings andadjust the
location ofyour vehicle.
. Up toapproximately 70cm (27 in)offine
adjustments canbemade. Deactivation
ofPA:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The PA will deactivate underthefollowing conditions.
. When thesteering wheelisoperated manually.
. When theshift lever isplaced inthe ªPº (Park)
position (CVTmodel) .
. When 5seconds havepassed sincetheshift lever
was placed andkept inthe ªNº (Neutral) position.
. When reverse operations areconducted more
than 10times forsteering corrections.
. When thesystem judgesthattheconditions (such
as worn outorlow pressure tires,roadconditions,
etc.) arenot suitable forcorrect coursepredic-
tions.
. When thevehicle backsuptoaposition behind
the place fromwhich PA operation started.
. When thevehicle passes thereverse starting
position byover 2m (7 ft).
. When thevehicle speedexceeds approximately 7
km/h (4MPH) .
. When theparking operation bythe driver deviates
from thePA guidance tosome extent.
Safety notes
GUID-6D4 0BBA6-4FA2-4E40-BEAB-A406F1 C43A17
WARNING:
. Donot drive looking onlyatthe screen. It
could cause unexpected accidentsorcause
the vehicle tocontact surrounding objects.
. When assistance fromthePA is no longer
necessary, turnoffthe PA by touching the
Cancel keyonthe screen. Ifthe PA remains
on, the steering wheelmayoperate auto-
matically andmay cause unexpected acci-
dents.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
. Make surethatthere isenough spacefor
parking maneuvers beforestarting touse
the PA .
. Keep inmind thatthefront ofthe vehicle
may swing outtowards oncoming traffic
while thePA functions.
CAUTION:
Do not use thePA under thefollowing condi-
tions.
. Onunpaved roads.
. Onslippery roadssuchassnow-covered or
frozen roads.
. Onuneven roadswithslants, bumps, curb-
stones, wheeltracks, etc.
. Oncurved roads.
. Atmechanical parkingfacilities.
. Where parking orstopping isprohibited.
. When tirechains oraspare tireareinstalled.
. When thevehicle isbeing towed.
. When thedoors (including theback door)
are not closed.
. When transporting aload thatprotrudes
from yourvehicle.
. When thevehicle isladen withheavy loads.
NO TE:
. Under theconditions listedbelow, theremay
be instances inwhich surrounding objectsor
vehicles cutinto thevehicle pathway, or
when thevehicle cannotbeparked inthe
correct spotfollowing thePA operation, etc. Ð
When theshift lever isoperated while
driving.
Ð When sudden start,sudden stopor
sudden operation ofthe shift lever oc-
curs.
Ð When thetire pressure istoo low orthe
tire isworn out.
Ð When tiresareinstalled thatareofa
different sizefrom theones thatwere
equipped atthe time offactory shipment.
. When usingtheparallel parking mode,itis
not always possible forthe system tofind an
appropriate parkingspaceandmay indicate
parking spacesthatarenot suitable for
parking. Following areexample conditions
for which thesystem maynotfind aparking
space correctly.
Ð Parking spaceswithobjects located
above theheight rangeofparking sen-
sors (sonars) (i.e.,overhanging loads,tail
sections orloading rampsofgoods
vehicles) .
Ð Parking spacesthatarepartially occu-
pied bytrailer drawbars.
Ð Parking spacesthatarelittered orover-
grown.
Ð Parking spaceswhereacurb exists
(causing damageofthe wheels andtires) .
Ð Parking spacesthatareblocked by
foliage, grass,paving, blocks,etc.
Ð Parking spacesbordered byan obstacle
(i.e., atree, apost oratrailer) .
Ð Parking spaceswithobjects thatabsorb
ultrasonic wavessuchasfabric andsnow. Ð
During snowfall orheavy rain.
Ð Near objects thatemits ultrasonic waves
such ashorns ofother vehicle, noisefrom
a motorcycle engineandlarge automo-
bile airbrake, orsensors ofsurrounding
vehicles.
Ð When theconditions surrounding the
parking spacechange (i.e.,another vehi-
cle enters thetarget parking spaceafter
you pass it).
Operating tips:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The parking sensor(sonar) willautomatically turn
on when thePA is activated. WhenthePA
operation ends,thestatus ofthe parking sensor
(sonar) willreturn tothe mode thatitwas inbefore
the PA was activated.
. Depending onthe situation, theshift lever opera-
tions mayberequired severaltimes.
Malfunction:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
A warning message willbedisplayed andthesystem
will terminate operation whenamalfunction isdetected
in the PA .
When thewarning message isdisplayed duringthePA
operation, parkthevehicle inasafe place andrestart
the engine.
If the warning message isshown onthe display
repeatedly orifthe PA cannot beoperated after
restarting theengine, thismay indicate asystem
malfunction. Itshould nothinder normal driving, but
the vehicle shouldbeinspected byaNISSAN dealer.
Display screen,heaterandairconditioner ,and audio system
4-23
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-76
Display screen,heaterandaircondition er,and audio system
system) repeatedly untilthedisplay switches tothe
AUX mode.
NISSAN stronglyrecommends usingastereo mini
plug cable whenconnecting yourmusic device tothe
audio system. Musicmaynotplay properly whena
monaural cableisused.
STEERING WHEELMOUNTED CON-
TROLS FORAUDIO (Type A)(ifequipped)
GUID-5B 9FADA5-B8B4 -4AAF-B536-AF 6A8C89 A774
JVH0922X
1. Tuning button
2. Volume control button
T uning button
GUID-42 403DAC-1 0D0-4B39-B9 7E-B93CC1F4FB10
Radio:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. Push thetuning button forless than 1.5seconds
to change thenext orprevious radiopreset.
. Push thetuning button formore than1.5seconds
to seek thenext orprevious radiostation.
CD:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. Push thetuning button forless than 1.5seconds
to shift tothe next track orthe beginning ofthe
current track(theprevious trackifthe button is
pushed immediately afterthecurrent trackstarts
playing) . .
Push thetuning button formore than1.5seconds
to forward orrewind thetrack.
CD with MP3, iPod, USBmemory orBluetooth


> (GLW    0RGHO 7$@
3. Phone
button
4. MENU/ENTER dial
Steering wheelmounted
control:
JVH0854X
T ype A
JVH0855X
T ype B
1. Volume control
-/
+ buttons
Push thebuttons toincrease ordecrease the
volume ofthe speakers.
2. Phone send
/
button
.
Accept anincoming callbypushing once.
.
Redial thelast outgoing callbypushing the
button formore than2seconds. 3.
Phone end
button
.
Reject anincoming callbypushing thebutton
during anincoming call.
.
End anactive callbypushing thebutton once.
Microphone:
Microphone islocated nearthemap lights.
Bluetooth


> (GLW    0RGHO 7$@
cannot beshown) andthree operation iconsas
illustrated. To highlight differenticons,turnthe
MENU/ENTER dial.Push theMENU/ENTER dialto
select thehighlighted icon.
*
1
Answering andduring acall:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Answer thecall by selecting
on the display orby
pushing
/
on the steering wheel.
During thecall, thefollowing iconsareavailable:
.
:
Select thisitem toend thecall.
.
:
Select thisitem toput thecall onhold.
.
:
Select thisitem totransfer thecall from thehands-
free phone system toyour cellular phone.
.
:
Select thisitem totransfer thecall back tothe
hands-free phonesystem fromthecellular phone.
. #123:
Select thisitem toenter numbers duringacall. For
example, usethisfunction whendirected byan
automated phonesystem todial anextension
number.
*
2
Putting acall onhold:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o put acall onhold, select
. Select
to return to
the call. To reject thecall select
.
*
3
Rejecting acall:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o reject anincoming call,select
or by pushing
on the steering wheel.
Making acall
GUID-B127B FA1-6ABB -4F70-9F3D -4C87B05C2 A8F
WARNING:
Park thevehicle inasafe location, andapply the
parking brakebefore making a
call.
JVH0863X
A call can beinitiated usingoneofthe following
methods:
. Making acall from thephonebook
. Manually dialingaphone number
. Redialing
. Using callhistory (CallListmenu)
Ð Dialed
Ð Received
Ð Missed Making
acall from thephonebook:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Once theBluetooth


> (GLW    0RGHO 7$@
4-82
Display screen,heaterandaircondition er,and audio system
Quick searching the phonebook:
JVH0858X
The quick search modecanbeused asfollows:
1. Push theA-Zbutton.
2. Turn theMENU/ENTER dialforthe first alphabetic
or numerical letterofthe contact name.Once
highlighted, pushtheMENU/ENTER dialtoselect
the letter.
3. The display willshow thecorresponding contact
name(s) .Where necessary ,use theMENU/
ENTER dialtoscroll further forthe appropriate
contact nametocall.
4. The screen willshow thenumber tobe dialed.
Push theMENU/ENTER dialtodial thenumber. Manually
dialingaphone number:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH0859X
T o dial aphone number manually ,perform thefollowing
operation:
1. Push the
button onthe instrument panel
and turn theMENU/ENTER dialtohighlight ªDial
Numberº .
2. Push theMENU/ENTER dialtoselect ªDial
Numberº .
3. Turn theMENU/ENTER dialtoscroll along and
highlight eachnumber ofthe phone number. Push
the MENU/ENTER dialtoselect thehighlighted
number.
T o delete thelast number entered, scrolltothe
ª/º (Backspace symbol)andonce highlighted,
push theMENU/ENTER dial.Thelastnumber will
be deleted. PushingtheMENU/ENTER dial
repeatedly willdelete eachsubsequent number.
4. After entering thelast number, highlight the
icon andpush theMENU/ENTER dialto
dial thenumber. Redial:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o redial orcall thelast number dialed,pushandhold
the
button onthe instrument panelorthe
steering wheelformore than2seconds.
Using callhistory (Calllistmenu) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH0860X
A number fromthedialed, received, ormissed calllists
can also beused tomake acall.
1. Push the
button onthe instrument panel
and select ªCallListºonthe display .
2. Turn theMENU/ENTER dialand scroll toan item,
and push theMENU/ENTER dialtoselect anitem.
Available items:
.
Dialed
Use thedialed callmode tomake acall which
is based onthe listofoutgoing (dialed)calls.
.
Received
Use thereceived callmode tomake acall
which isbased onthe listofreceived calls.
.
Missed
Use themissed callmode tomake acall which
is based onthe listofmissed calls.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Scroll tothe preferred phonenumber andpush
the MENU/ENTER dialorthe
button on
the instrument panel.
Second incoming call
GUID-59D F6319-FD1 9-4DC6-902 8-5A12E96D1 D6A
JVH0861X
Whenever thereisasecond incoming callisshown in
the display .By selecting the
icon thecall is
accepted andthecurrent callisput onhold.
Selecting the
icon using theMENU/ENTER dial
rejects thesecond incoming call.When thisisdone
during theconversation itends thecall.
Selecting
the
icon using theMENU/ENTER dial
switches thecall online between thefirst and the
second call.
Ending acall
GUID-75F8 FFE0-134E-4C 42-9687-3611EBA244FF
T o end anactive call,highlight the
icon andpush
the ENTER/MENU dialorpush the
button onthe
steering wheel.
GENERAL SETTINGS
GUID-433E 6CA5-2B0C -434D-BE91-C83E663B 4E6F
JVH0862X
Using theMENU/ENTER dial,highlight ªSettingsº from
the phone menuandpush theMENU/ENTER dial.
V olume settings andmanually downloading thephone-
book canbedone using thismenu.
Menu operation:
T urn theMENU/ENTER dialtochange thehighlighted
item andtochange thevolume settings.
Push theMENU/ENTER dialtoselect thehighlighted
item andtoapply thesetting.
Menu items:
. Volume
Ð Ring
Set thephone ringing volume.
Ð Call
Set thevolume ofthe conversation duringa
call.
. Ringtone
Ð Car
Switch theringtone toring from thevehicle or
the cellular phone. Ð
Phone
Switch thephone ringing volume onoroff.
. PBdownload
Download thephonebook ofthe mobile deviceto
the audio unitmanually .
Display screen,heaterandairconditioner ,and audio system
4-83
&RQGLWLRQ
([FHSWIRU&KLQD