2017 NISSAN X-TRAIL seat adjustment


> (GLW    0RGHO 7$@
WARNING:
. The shoulder beltanchor heightshould be
adjusted tothe position bestforyou. Failure
to do somay reduce theeffectiveness ofthe
entire restraint systemandincrease the
chance orseverity ofinjury inan accident.
. The shoulder beltshould restonthe middle
of the shoulder. Itmust notrest against the
neck.
. Besure thattheseat beltisnot twisted in
any way.
. Be sure thattheshoulder beltanchor is
secured bytrying tomove theshoulder belt
anchor upand down afteradjustment.
The shoulder beltanchor heightshould beadjusted to
the position bestforyou.
The belt should beaway fromyourfaceandneck, but
not falling offyour shoulder.
T o adjust, pulltherelease button
*
1
and move the
shoulder beltanchor tothe proper position
*
2
, so that
the belt passes overthecenter ofthe shoulder.
Release thebutton tolock theshoulder beltanchor
into position.
Unfastening seatbelts
T32A1308 27-6CC264E 9-D8AD-4962 -9D73-34F9C8D92938
Push thebutton onthe buckle. Theseat belt
automatically retracts.
Belt hook (ifequipped)
T32A130827- 702349E6-D2F 9-4807-B5A0-7C9EC 0BE7832
JVR0353X
Seat beltcanbehooked onthe belt hook.
Checking seatbeltoperation
T32A1308 27-71A5C 13C-A297- 4A48-8CD6-F B07919F9DB4
Seat beltretractors aredesigned tolock seat belt
movement:
. When theseat beltispulled quickly fromthe
retractor.
. When thevehicle slowsdownrapidly .
T o increase yourconfidence inthe seat belts, check
the operation bygrasping theshoulder beltandpulling
forward quickly.The retractor shouldlockandrestrict
further beltmovement. Ifthe retractor doesnotlock
during thischeck, contact aNISSAN dealerimmedi-
ately .
SEA TBEL TMAINTENANCE
T32A1308 27-091995 35-EE25-4EAC -9D54-D0AED305C354
Periodically checkthattheseat beltandallthe metal
components, suchasbuckles, tongues, retractors,
flexible wiresandanchors, workproperly .If loose parts,
deterioration, cutsorother damage onthe seat belt
webbing isfound, theentire seatbeltassembly should
be replaced.
If dirt builds upinthe shoulder beltguide ofthe seat
belt anchors, theseat belts mayretract slowly.Wipe
the shoulder beltguide withaclean, drycloth.
T o clean theseat beltwebbing, applyamild soap
solution orany solution recommended forcleaning
upholstery orcarpet. Thenwipewithacloth andallow
the seat belts todry inthe shade. Donot allow theseat
belts toretract untilthey arecompletely dry.
Safety Ðseats, seatbelts andsupplementa lrestraint system
1-13
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
UNIVERSAL CHILDRESTRAINTS FOR
FRONT SEATAND REAR SEATS(for Eur-
ope)
GUID-9B FC6C9D-867 1-4D95-8AAD-9E4C6F1D11F9
When selecting anychild restraint, keepthefollowing
points inmind:
. Choose achild restraint thatcomplies withthe
latest European safetystandard, ECERegulation
44.04.
. Place yourchild inthe child restraint andcheck
the various adjustments tobe sure thechild
restraint iscompatible withyour child. Always
follow allofthe recommended procedures.
. Check thechild restraint inyour vehicle tobe sure
it is compatible withvehicle's seatbeltsystem.
. Refer tothe tables laterinthis section foralist of
the recommended fitmentpositions andthe
approved childrestraints foryour vehicle.
Mass group ofchild seat
GUID-40AF 683E-378A-45A8-940 6-AEFC4F5E6253
Mass group Child'sweight
Group 0 upto10 kg
Group 0+ upto13 kg
Group I 9to 18 kg
Group II 15to25 kg
Group III 22to36 kg
Kind ofchild seats (example) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVR0371X
Child safety seatcategories 0and 0+
JVR0372X
Child safety seatcategories 0+and I
JVR0373X
Child safety seatcategories IIand III
Safety Ðseats, seatbelts andsupplementa lrestraint system
1-15
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-26
Pre-driving checksandadjustments
formed foracertain periodoftime. Inthis
case, waitforawhile andthen perform the
operation.
P ower close
GUID-CC B3E1AA-F7F C-4580-824E-AE894FFC0FC5
When theback doorisfully opened, theback doorwill
fully close automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts closing.
Reverse function
GUID-E38 E5684-FF75 -4567-AC95-7492FB18 146B
The power backdoorwillreverse immediately ifone of
the following actionsisperformed duringpoweropen
or power close.
. pushing thepower backdoorswitch
*
A
on the
instrument panel
. pushing thepower backdoorswitch
*
D
on the
lower partofthe back door
. pushing thepower backdoorbutton
*
C
on the key.
The outside chimesounds whentheback doorstarts
to reverse.
Auto reverse function
GUID-98CB 1259-07F7-4 E7C-9EB2-D4EF10F4 F969
The auto-reverse functionenablestheback doorto
automatically reversewhensomething iscaught inthe
back doorasitis opening orclosing. Whenthecontrol
unit detects anobstacle, theback doorwillreverse and
return tothe fullopen orfull close position.
If asecond obstacle isdetected, theback doormotion
will stop. Theback doorwillenter themanual mode.
A pinch sensor ismounted oneach sideofthe back
door. Ifan obstacle isdetected bythe pinch sensor
during powerclose,theback doorwillreverse and
return tothe fullopen position immediately .
NO TE:
If the pinch sensor isdamaged orremoved, the
power closefunction willnotoperate.
WARNING:
There isasmall distance immediately beforethe
closed position thatcannot bedetected. Make
sure thatallpassengers keeptheirhands, etc.,
clear fromtheback dooropening beforeclosing
the back door.
Manual mode
GUID-FD58C3 34-881E-4F97-9CD8-8548D2267CDB
If power operation isnot available, theback doorcan
be operated manually.Power operation maynotbe
available ifmultiple obstacles havebeen detected ina
single power cycleorifthe battery voltage islow .
When thepower backdoormain switch isin the OFF
position, theback doorcanbeopened manually by
pushing theback dooropener switch.Ifthe power
back dooropener switchispushed duringpoweropen
or close, thepower operation willbecanceled andthe
back doorcanbeoperated manually.
AUT OCL OSURE (ifequipped)
GUID-5E1 D548E-B20 5-4D0F-BE11-4BC09 228D416
If the back doorispulled downtoapartly open
position, theback doorwillpull itself tothe closed
position.
Do not apply excessive forcewhen theauto
closure isoperating. Excessiveforceapplied
may cause themechanism tomalfunction.
CAUTION:
. The back doorwillautomatically closefrom
a partly openposition. To avoid pinching,
keep hands andfingers awayfromback
door opening.
. Donot letchildren operatetheback door.
BACK DOOR RELEASE LEVER
GUID-4A1 D87BC-BEAC-4 21F-8B76-F15FD5B474 D5
JVP0280X
If the back doorcannot beopened withthepower door
lock switch duetoadischarged battery,follow these
steps.
1. Fold therear seats down. SeeªSeatsº (P.1-2) .
2. Insert asuitable toolinthe access opening. Move
the release levertothe right. Theback doorwillbe
unlatched.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-30
Pre-driving checksandadjustments
T32A1308 27-3EAB989 7-9B0B-47AB-BC92-A0FAB01FF 312
WARNING:
. Never drivethevehicle withtheparking
brake applied. Thebrake willoverheat and
fail tooperate andwilllead toan accident.
. Never release theparking brakefromout-
side thevehicle. Ifthe vehicle moves, itwill
be impossible topush thefoot brake pedal
and willlead toan accident.
. Never usetheshift lever inplace ofthe
parking brake.Whenparking, besure the
parking brakeisfully applied.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Theycould unknowingly
release theparking brakeandinadvertently
become involved inaserious accident.
PEDAL TYPE
GUID-29 9E5FC1-DA0 3-4467-8F83-07CADBC7 0ECA
SP A2331
T o apply theparking brake,firmlydepress theparking
brake pedal
*
1
.
T o release theparking brake,depress andhold thefoot
brake
*
2
and then fullydepress andrelease the
parking brakepedal
*
1
. Before
driving, besure thatthebrake warning lighthas
turned off.
SWIT CHTYPE (models withelectronic
parking brakesystem)
GUID-99B5D B44-0FAE-40C9 -84EB-B94A2 B3BC9A 2
JVP0310X
The electronic parkingbrakecanbeapplied or
released automatically orby operating theparking
brake switch.
Automatic operation
GUID-2CD5 BAA4-829D-4 ED2-907D-61D3F00A1872
The electronic parkingbrakeisautomatically applied
when theengine isturned offwith theignition switch
(for MTmodel) .
The electronic parkingbrakeisautomatically released
as soon asthe vehicle startswhiletheaccelerator
pedal isdepressed.
For CVT model, thedriver's seatbeltneeds tobe
fastened.
WARNING:
. The electronic parkingbrakewillnotbe
automatically appliedifthe engine is
stopped withoutusingtheignition switch
(for example, byengine stalling) . .
Before leaving thevehicle, movetheshift
lever tothe ª1º(1st) orªRº (Reverse) position
(for MTmodel) orªPº (Park) position (CVT
model) andcheck thattheelectronic parking
brake warning light
is illuminated to
confirm thattheelectronic parkingbrakeis
applied. Theelectronic parkingbrakewarn-
ing light willremain onfor aperiod oftime
after thedriver's doorislocked.
CAUTION:
When parking inan area where theoutside
temperature isbelow 08C (32 8F),do not apply
the parking braketoprevent itfrom freezing.
For safe parking, placetheshift lever inthe ª1º
(1st) orªRº(Reverse) position(forMTmodel) or
ªPº (Park) position (CVTmodel) andsecurely
block thewheels.
NO TE:
. To keep theelectronic parkingbrakere-
leased aftertheengine isturned off,place
the ignition switchinthe ªOFFº position,
depress thebrake pedalandpush down the
parking brakeswitch before opening the
driver's door.
. Ifamalfunction occursinthe electric park-
ing brake system (forexample, dueto
battery discharge) ,contact aNISSAN dealer.
P ARKING BRAKE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Manual operation
GUID-904 D853F-51E6-4 D60-943F-53D00450A7A9
The electronic parkingbrakewillnotbeautomatically
applied ifthe engine isstopped withoutusingthe
ignition switch(forexample, byengine stalling) .In such
a case, youhave toapply theparking brakemanually .
T o apply: Pulltheswitch up
*
1
. The indicator light
*
A
will illuminate.
T o release: Withtheignition switchinthe ªONº
position, depressthebrake pedalandpush theswitch
down
*
2
. The indicator light
*
A
will turn off.
Before driving, checkthattheelectronic parkingbrake
warning light
goes out.Foradditional information,
see ªWarning/indicator lightsandaudible remindersº
(P .2-12) .
NO TE:
. Abuzzer willsound ifthe vehicle isdriven
without releasing theparking brake.See
ª Audible remindersº (P.2-19) .
. While theelectronic parkingbrakeisapplied
or released, anoperating soundisheard
from thelower sideofthe rear seat. Thisis
normal anddoes notindicate amalfunction.
. When theelectronic parkingbrakeisfre-
quently applied andreleased inashort
period oftime, theparking brakemaynot
operate inorder toprevent theparking
brake system fromoverheating. Ifthis
occurs, operate theelectronic parkingbrake
switch againafterwaiting approximately 1
minute.
. Ifthe electronic parkingbrakemustbe
applied whiledriving inan emergency, pull
up and hold theparking brakeswitch. When
you release theparking brakeswitch, the
parking brakewillbereleased. .
While pulling upthe electronic parking
brake switch during driving, theparking
brake isapplied andachime sounds. The
electronic parkingbrakewarning lightinthe
meter andinthe parking brakeswitch
illuminate. Thisdoes notindicate amalfunc-
tion. Theelectronic parkingbrakewarning
light inthe meter andinthe parking brake
switch turnoffwhen theparking brakeis
released.
. When pulling theelectronic parkingbrake
switch upwith theignition switchinthe
ªOFFº orªACCº position, theparking brake
switch indicator lightwillcontinue toillumi-
nate forashort period oftime.
When towing atrailer (forAustralia, New
Zealand, SouthAfricaandEurope)
GUID-D10 4E447-6887-4 FAC-B2E9-1 062DDCEF362
Depending onthe weight ofthe vehicle andtrailer and
the steepness ofthe slope, theremaybeatendency
for the vehicle tomove backwards whenstarting froma
standstill. Whenthisoccurs, youcan usetheparking
brake switch inthe same wayasaconventional lever
type parking brake.
Before starting onsloping roadswhentowing atrailer,
be sure toread thefollowing toprevent thevehicle
from moving backward unintentionally .
1. Pull and hold theparking brakeswitch while
depressing theaccelerator pedalandengaging
the clutch (MTmodels) .
2. Release theparking brakeswitch assoon asthe
engine isdelivering enoughtorquetothe wheels.
Pre-driving checksandadjustments
3-31
&RQGLWLRQ
([FHSWIRU&KLQD